CD-SIPS2014_Volume
< CD shopping page

2014-Sustainable Industrial Processing Summit
SIPS 2014 Volume 5: Composite, Ceramic, Quasi-crystals, Nanomaterials & Coatings

Editors:Kongoli F
Publisher:Flogen Star OUTREACH
Publication Year:2014
Pages:578 pages
ISBN:978-1-987820-07-2
ISSN:2291-1227 (Metals and Materials Processing in a Clean Environment Series)


  1. L-α-diheptanoylphosphatidycholine (DHPC) Capped Gold Nanoparticles: Synthesis
    Sourbh Thakur1;
    1UNIVERSITY OF JOHANNESBURG, Amritsar, India;
    Type of Paper: Regular
    Id Paper: 272
    Topic: 14

  2. Na2S-P2S5 glass/ glass-ceramic solid electrolytes for rechargeable sodium batteries at room temperature
    Paramjyot Kumar Jha1;
    1SCHOOL OF PHYSICS AND MATERIALS SCIENCE, Patiala, India;
    Type of Paper: Regular
    Id Paper: 256
    Topic: 14

  3. Synthesis, characterization and properties of radiation-induced Gum ghatti-poly(acrylic acid-aniline) hydrogels
    Kashma Sharma1;
    1SHOOLINI UNIVERSITY OF BIOTECHNOLOGY AND MANAGEMENT SCIENCES, SOLAN, HIMACHAL PRADESH, Solan, India;
    Type of Paper: Regular
    Id Paper: 265
    Topic: 14

  4. Effect of annealing on the defect concentration of microwave induced synthesized zinc oxide nanophosphors
    Vijay Kumar1;
    1UNIVERSITY OF THE FREE STATE, P.O. Box 339, Bloemfontein 9300, South Africa (zuid Afrika);
    Type of Paper: Regular
    Id Paper: 264
    Topic: 14

  5. DETERIORATION OF STAINLESS STEEL USED IN THE METALLIC INDUSTRY OF MEXICALI BY THE DIFFUSIVITY OF CARBON
    Gustavo Lopez1;
    1INSTITUTO TECNOLOGICO DE MEXICALI, Mexicali, Mexico;
    Type of Paper: Regular
    Id Paper: 127
    Topic: 14

  6. Influence of One-Dimensional CdS Nanoparticles on Physical Parameters of Ferroelectric Liquid Crystal for Display and Non Display Applications
    Ashok Chaudhary1;
    1BGU, Beer Sheva, Israel;
    Type of Paper: Regular
    Id Paper: 258
    Topic: 14

  7. Electrical conductivity of barium doped LaInO3 electrolyte
    Kapil Sood1;
    1THAPAR UNIVERSITY, PATIALA, Patiala, India;
    Type of Paper: Regular
    Id Paper: 201
    Topic: 14

  8. Pt/NiO/MWCNTs composite based room temperature Hydrogen gas sensor
    Shivani Dhall1;
    1NIT, KURUKSHETRA, Kurukshetra, India;
    Type of Paper: Regular
    Id Paper: 202
    Topic: 14

  9. Organic Nanowires for Molecular Electronic Device Applications
    Rajan Saini1;
    1GURU NANAK DEV UNIVERSITY, Amritsar, India;
    Type of Paper: Regular
    Id Paper: 257
    Topic: 14

  10. Synthesis and Characterization of CdS0.9Se0.1 Nanoparticles Prepared by Chemical Method for Used as Thermoelectric Materials
    Thapanee Sarakonsri1;
    1CHIANG MAI UNIVERSITY, Maung, Thailand;
    Type of Paper: Regular
    Id Paper: 230
    Topic: 14

  11. Characterization of Tris (8-hydroxyquinoline) aluminum films for device applications
    mandeep singh1;
    1, Bari, Italy;
    Type of Paper: Regular
    Id Paper: 251
    Topic: 14

  12. Pure and doped zinc oxide thin films by spray pyrolysis
    Onkar Singh1;
    1, Winnipeg, Canada;
    Type of Paper: Regular
    Id Paper: 236
    Topic: 14

  13. Anticancer drug-loaded Plasmonic core-shell Nanocapsules for targeted cancer therapy
    Pankaj Thakur1;
    1ITALIAN INSTITUTE OF TECHNOLOGY, Naples, Italy;
    Type of Paper: Regular
    Id Paper: 246
    Topic: 14

  14. Chalcopyrite type Solar Cells
    Dinesh Pathak1;
    1UNIVERZITA PARDUBICE, Pardubice, Czech Republic;
    Type of Paper: Regular
    Id Paper: 249
    Topic: 14

  15. Preparation and characterization of Cr2O3 thin films deposited using electron beam evaporation method
    Vishal Baloria1;
    1GURU NANAK DEV UNIVERSITY, AMRITSAR, Amritsar, India;
    Type of Paper: Regular
    Id Paper: 250
    Topic: 14

  16. Multifractal analysis of SiO2/polyester hybrid for immobilization of Ru(II) complex
    Dinesh Pathak1; Stefan Talu2; Sebastian Stach3; Maria Milanova4; Joana Zaharieva4; Dimitar Todorovsky4;
    1UNIVERZITA PARDUBICE, Pardubice, Czech Republic; 2TECHNICAL UNIVERSITY OF CLUJ-NAPOCA, FACULTY OF MECHANICAL ENGINEERING, DEPARTMENT OF AET, DISCIPLINE OF DESCRIPTIVE GEOMETRY AND ENGINEERING GRAPHICS, Cluj-Napoca, Romania; 3UNIVERSITY OF SILESIA, FACULTY OF COMPUTER SCIENCE AND MATERIALS SCIENCE, INSTITUTE OF INFORMATICS, DEPARTMENT OF BIOMEDICAL COMPUTER SYSTEMS, Sosnowiec, Poland; 4UNIVERSITY OF SOFIA, FACULTY OF CHEMISTRY, DEPARTMENT OF INORGANIC CHEMISTRY, Sofia, Bulgaria;
    Type of Paper: Regular
    Id Paper: 275
    Topic: 14

  17. Synthesis and Characterization of Sodium Impregnated Calcium Oxide as a Solid Nano Catalyst for Transesterification of Vegetable oils
    Dinesh Kumar1;
    1CHONBUK NATIONAL UNIVERSITY, JEONJU, SOUTH KOREA, Jeonju, Korea (Republic of [South] Korea);
    Type of Paper: Regular
    Id Paper: 267
    Topic: 14

  18. Solution Based Organic-Inorganic Semiconductor Hybrid Solar cells
    Muhammad Ikram1;
    1GOVERNMENT COLLEGE UNIVERSITY LAHORE,PUNJAB PAKISTAN, Pakpattan, Pakistan;
    Type of Paper: Regular
    Id Paper: 268
    Topic: 14

  19. NiS/CNT composites as counter electrode for dye-sensitized solar cell applications
    Aman Mahajan1;
    1GURU NANAK DEV UNIVERSITY, INDIA, Amritsar, India;
    Type of Paper: Regular
    Id Paper: 269
    Topic: 14

  20. Multifractal characterisation of thin ferrite films deposited by spray-pyrolysis
    Maria Milanova1; Stefan Talu2; Sebastian Stach3; Dinesh Pathak4; Joana Zaharieva1; Dimitar Todorovsky1;
    1UNIVERSITY OF SOFIA, FACULTY OF CHEMISTRY, DEPARTMENT OF INORGANIC CHEMISTRY, Sofia, Bulgaria; 2TECHNICAL UNIVERSITY OF CLUJ-NAPOCA, FACULTY OF MECHANICAL ENGINEERING, DEPARTMENT OF AET, DISCIPLINE OF DESCRIPTIVE GEOMETRY AND ENGINEERING GRAPHICS, Cluj-Napoca, Romania; 3UNIVERSITY OF SILESIA, FACULTY OF COMPUTER SCIENCE AND MATERIALS SCIENCE, INSTITUTE OF INFORMATICS, DEPARTMENT OF BIOMEDICAL COMPUTER SYSTEMS, Sosnowiec, Poland; 4UNIVERZITA PARDUBICE, Pardubice, Czech Republic;
    Type of Paper: Regular
    Id Paper: 276
    Topic: 14

  21. Improved Performance of Dye-Sensitized Solar Cell Using Cetyl Trimethylammonium Bromide Capped Silver Nanoparticles.
    Tanvi Tanvi1;
    1GURU NANAK DEV UNIVERSITY, Amritsar, India;
    Type of Paper: Regular
    Id Paper: 278
    Topic: 14

  22. Effect of different carbon sources on direct synthesis of nano tungsten carbide from scheelite
    Harjinder Singh1; O.P. Pandey2;
    1GOVERNMENT POLYTECHNIC COLLEGE, Ferozepur, India; 2THAPAR UNIVERSITY, Patiala, India;
    Type of Paper: Regular
    Id Paper: 283
    Topic: 14

  23. Dielectric behaviour, phenomenon of a.c. conduction and density of defect states (DOS) in chalcogenide semiconducting Se70Te28M2 (M=Ag, Cd, Zn) glasses
    Chandrabhan Dohare1;
    1BANARAS HINDU UNIVERSITY, Varanasi, India;
    Type of Paper: Invited
    Id Paper: 285
    Topic: 14

  24. Organic Materials for photovoltaic applications: Review and Mechanism
    navpreet kaur1;
    1UNIVERSITA DEGLI STUDI DI BRESCIA, Bari, Italy;
    Type of Paper: Regular
    Id Paper: 289
    Topic: 14

  25. X-ray absorption near edge spectroscopy studies of RCo1-xNixO3 (R = La, Nd)
    Vinod Kumar1;
    1NATIONAL INSTITUTE OF TECHNOLOGY HAMIRPUR, Hamirpur (H.P), India;
    Type of Paper: Regular
    Id Paper: 295
    Topic: 14

  26. Microstructure, mechanical and chemical properties of Au/SiO2 composites
    Alena Reznickova1;
    1ICT PRAGUE, Prague, Czech Republic;
    Type of Paper: Regular
    Id Paper: 52
    Topic: 16

  27. Tuning the Optical Properties of Ordered Arrays of Ag Nanostructures Created by Ion Implantation through a Mask of Colloidal Silica Particles
    Juan-Carlos Cheang-Wong1;
    1INSTITUTO DE FISICA, UNIVERSIDAD NACIONAL AUTONOMA DE MEXICO, Mexico, Mexico;
    Type of Paper: Regular
    Id Paper: 71
    Topic: 16

  28. PREPARATION OF TiO2-SiO2 FILM DEPOSITED ON SILICON RUBBER ELECTRICAL INSULATORS USING SOL-GEL DIP-COATING METHOD
    Majid Jafari1;
    1METERIAL ENGINEERING OF NAJAFABAD UNIVERSITY, Esfahan, Iran (Islamic Republic of Iran);
    Type of Paper: Regular
    Id Paper: 74
    Topic: 16

  29. Carbon coated LiMPO4 (M = Co & Ni) nanoparticles for high power lithium-ion batteries
    Vallabhaneni Madhusudhan Rao1;
    1VIGNAN'S FOUNDATION FOR SCIENCE ,TECHNOLOGY & RESEARCH, Guntur, India;
    Type of Paper: Regular
    Id Paper: 75
    Topic: 16

  30. Synthesis and characterization of gold nanoshells on Ag nanoparticles templates
    Jose Moller1;
    1CIMAV (CENTRO DE INVESTIGACION EN MATERIALES AVANZADOS), CHIHUAHUA, Mexico;
    Type of Paper: Regular
    Id Paper: 81
    Topic: 16

  31. High Temperature Synthesis of Zircon-Mullite-Zirconia Refractory Ceramic Composite from Clay Based Materials
    Fatai Olufemi Aramide1; Keneth Kanayo Alaneme1; Peter O Olubambi2; Joseph Olatunde Borode1;
    1DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING, FEDERAL UNIVERSITY OF TECHNOLOGY, Akure, Nigeria; 2APPLIED MICROSCOPY AND TRIBOELECTROCHEMICAL RESEARCH LABORATORY, DEPARTMENT OF CHEMICAL AND METALLURGICAL ENGINEERING, TSHWANE UNIVERSITY OF TECHNOLOGY, Pretoria, South Africa (zuid Afrika);
    Type of Paper: Regular
    Id Paper: 90
    Topic: 16

  32. INVESTIGATION OF MODIFIED CERAMIC MASSES PROPERTIES
    Ospanova Gulzhan1;
    1KAZAKH NATIONAL TECHNICAL UNIVERSITY, Almaty, Kazakhstan;
    Type of Paper: Regular
    Id Paper: 108
    Topic: 16

  33. Ceramic Powder Obtained via Hybrid Inorganic-Organic Polymer Nanocomposites
    Andrei Sarbu1; Anita-Laura Radu1; Luminita Mara2; Victor Fruth3; Teodor Velea2; Andreea Gradinaru2; Anamaria Lungu1; Sorina Alexandra Garea4; Celina Damian4; Hasan Mandal5; Ferhat Yardim6;
    1NATIONAL RESEARCH- DEVELOPMENT INSTITUTE FOR CHEMISTRY AND PETROCHEMISTRY- ICECHIM BUCHAREST, ROMANIA, Bucharest, Romania; 2NATIONAL RESEARCH- DEVELOPMENT INSTITUTE FOR NONFERROUS AND RARE METALS- IMNR BUCHAREST, ROMANIA, Pantelimon, Romania; 3INSTITUTE FOR PHYSICAL CHEMISTRY "ILIE MURGULESCU" OF THE ROMANIAN ACADEMY- BUCHAREST, ROMANIA, Bucuresti, Romania; 4UNIVERSITY "POLITEHNICA" BUCHAREST, ROMANIA, Bucharest, Romania; 5SABANCI UNIVERSITY ISTANBUL, TURKEY, Istanbul, Turkey; 6TECHNICAL UNIVERSITY FROM ISTANBUL, TURKEY, Istanbul, Turkey;
    Type of Paper: Regular
    Id Paper: 109
    Topic: 16

  34. Synthesis of magnetic Nano - Fe3 O4 with tunable size
    Weijia Wang1; Xueyi Guo1; Qinghua Tian1; Wenbo Ning1; Fangfang Mao1;
    1CENTRAL SOUTH UNIVERSITY, Changsha, China;
    Type of Paper: Regular
    Id Paper: 113
    Topic: 16

  35. Innovations in Processing of Lightweight Metal Matrix Composites
    Ramana Reddy1;
    1THE UNIVERSITY OF ALABAMA, Tuscaloosa, United States;
    Type of Paper: Plenary
    Id Paper: 133
    Topic: 16

  36. Biomimetic Bone Graft Substitutes using a Polymer-Induced Liquid-Precursor (PILP) Mineralization Process
    Laurie Gower1;
    1UNIVERSITY OF FLORIDA, Gainesville, United States;
    Type of Paper: Regular
    Id Paper: 135
    Topic: 16

  37. Biodegradable Core-Shell Microcapsules for Controlled Release Applications
    Laurie Gower1; Mark Bewernitz1; Archana Chidambaram1;
    1UNIVERSITY OF FLORIDA, Gainesville, United States;
    Type of Paper: Regular
    Id Paper: 136
    Topic: 16

  38. Mechanical properties and microstructure characterization of Al-Si cast alloys formation using carbide nanoparticles.
    Michael Zinigrad1; Konstantin Borodianskiy2; Roman Maev2;
    1ARIEL UNIVERSITY, Ariel, Israel; 2UNIVERSITY OF WINDSOR, Windsor, Canada;
    Type of Paper: Plenary
    Id Paper: 146
    Topic: 16

  39. Interfaces in epitaxial structures based on oxide ferroelectrics
    Lucian Pintilie1;
    1NATIONAL INSTITUTE OF MATERIALS PHYSICS, Magurele, Romania;
    Type of Paper: Invited
    Id Paper: 179
    Topic: 16

  40. PROCESSING OF BORON CARBIDE PARTICULATE SUBSTRATES BY DIRECT NITRIDATION
    Martin Pech-Canul1; Jose C. Flores-Garcia1; Saul A. Gallardo-Heredia1; Hector M. Hernandez-Garcia2; Jorge Lopez-Cuevas1;
    1CINVESTAV-SALTILLO, Ramos Arizpe, Mexico; 2COMIMSA, Saltillo, Mexico;
    Type of Paper: Regular
    Id Paper: 192
    Topic: 16

  41. TAGUCHI EXPERIMENTAL DESIGN FOR FILMS/COATINGS OPTIMIZATION OF (NH4)2SiF6. (NH4)3AlF6, NH4AlF4 PHASES ON ALUMINUM SHEET SUBSTRATES BY HYSY-CVD ROUTE
    Saul A. Gallardo-Heredia1; Jose C. Flores-Garcia1; Evangelina Trujillo-Vazquez1; Martin Pech-Canul1; Maximo A. Pech-Canul2;
    1CINVESTAV-SALTILLO, Ramos Arizpe, Mexico; 2CINVESTAV-MERIDA, Merida, Mexico;
    Type of Paper: Regular
    Id Paper: 194
    Topic: 16

  42. Investigation of Production of Silicon Nitride from Turkish Rice Husks
    Yavuz Ali Topkaya1; Ahmet Geveci1; Barys Yigit Alpay1;
    1METU, Ankara, Turkey;
    Type of Paper: Invited
    Id Paper: 203
    Topic: 16

  43. Characterization of relaxor ferroelectric ceramics and single crystals by acoustic emission
    Michael Roth1; Evgeniy Dulkin1; Boriana Mihailova2;
    1THE HEBREW UNIVERSITY OF JERUSALEM, Jerusalem, Israel; 2DPT GEOWISSENSCHAFTEN, HAMBURG UNIVERSITY, 20146 Hamburg, Germany (Deutschland);
    Type of Paper: Keynote
    Id Paper: 206
    Topic: 16

  44. Novel Nanotubular Surfaces for Biomechanics Applications
    Tolou Shokuhfar1;
    1MICHIGAN TECHNOLOGICAL UNIVERSITY, Houghton, United States;
    Type of Paper: Regular
    Id Paper: 210
    Topic: 16

  45. Inorganic nanotubes and fullerene-like nanoparticles at the crossroad between solid state chemistry and nanotechnology
    Reshef Tenne1;
    1WEIZMANN INSTITUTE OF SCIENCE, Rehovot, Israel;
    Type of Paper: Plenary
    Id Paper: 226
    Topic: 16

  46. Nanoparticles based on metallic iron - preparation, characteristics and applications
    Miroslav Cernik1;
    1TUL, Liberec, Czech Republic;
    Type of Paper: Keynote
    Id Paper: 229
    Topic: 16

  47. Fabrication of cryo-milling experiment set up to produce copper nano-powder, its consolidation using HSPC technique in FSW Machine
    Yatheesha Beemaiah1;
    1DON BOSCO INSTITUTE OF TECHNOLOGY, Bengaluru, India;
    Type of Paper: Regular
    Id Paper: 254
    Topic: 16

  48. Crystallization process of the faujasite zeolite: effect of alumina and silica sources
    Adriana Medina Ramirez1;
    1UNIVERSITY OF LA CIENEGA, Sahuayo de Morelos, Mexico;
    Type of Paper: Regular
    Id Paper: 293
    Topic: 16

  49. Sequential deposition of dental porcelain /Hydroxyapatite on 316L substrate by electrophoretic deposition as biomedical coating
    Georgina Garcia1;
    1UNIVERSITY OF LA CIENEGA, Sahuayo, Mexico;
    Type of Paper: Regular
    Id Paper: 300
    Topic: 16

  50. The impact of functional applications and nanoscience/nanotechnology on updating composite materials concepts and classifications
    Martin Pech-Canul1; Florian Kongoli2;
    1CINVESTAV-SALTILLO, Ramos Arizpe, Mexico; 2FLOGEN TECHNOLOGIES INC, MONT-ROYAL, Canada;
    Type of Paper: Keynote
    Id Paper: 356
    Topic: 16

  51. Sustainability and the Modified Central Paradigm of Materials Science and Engineering in the Development of New Materials
    Martin Pech-Canul1; Florian Kongoli2;
    1CINVESTAV-SALTILLO, Ramos Arizpe, Mexico; 2FLOGEN TECHNOLOGIES INC, MONT-ROYAL, Canada;
    Type of Paper: General Plenary
    Id Paper: 357
    Topic: 16

  52. FABRICATION AND CHARACTERIZATION OF RADIATION MODIFIED BIORESORBABLE POLYMERIC COMPOSITE FILM
    Kamol Dey1; Ruhul Khan2;
    1DEPARTMENT OF APPLIED & ENVIRONMENTAL CHEMISTRY, UNIVERSITY OF CHITTAGONG, Chittagong, Bangladesh; 2BANGLADESH ATOMIC ENERGY COMMISSION, Dhaka, Bangladesh;
    Type of Paper: Regular
    Id Paper: 365
    Topic: 16

  53. The story of Stable non-Lewis molecules: From Transient Species to "Bottleable" Compounds
    Shmuel Zilberg1;
    1THE HEBREW UNIVERSITY OF JERUSALEM, Jerusalem, Israel;
    Type of Paper: Keynote
    Id Paper: 379
    Topic: 16

  54. The Relevancy of Materials in Boosting Innovation: From Raw Materials to Creative Applications
    Rodrigo Martins1;
    1EMRS/UNINOVA/FCT-UNL, 2829-516 Caparica, Portugal;
    Type of Paper: General Plenary
    Id Paper: 384
    Topic: 16

  55. Al-N surface layer modification of aircraft engine compressor blades
    Pawel Rokicki1; Andrzej Nownotnik1; Kamil Dychton1; Marek Goral1; Marcin Drajewicz1; Jan Sieniawski1;
    1RZESZOW UNIVERSITY OF TECHNOLOGY, RESEARCH AND DEVELOPMENT LABORATORY FOR AEROSPACE MATERIALS, Rzeszow, Poland;
    Type of Paper: Regular
    Id Paper: 373
    Topic: 17

  56. Heat treatment process effect on carburized layer of aircraft engine heavily-loaded steel components
    Pawel Rokicki1; Kamil Dychton1; Andrzej Nownotnik1; Marek Goral1; Marcin Drajewicz1; Jan Sieniawski1; Maryana Zagula-Yavorska1;
    1RZESZOW UNIVERSITY OF TECHNOLOGY, RESEARCH AND DEVELOPMENT LABORATORY FOR AEROSPACE MATERIALS, Rzeszow, Poland;
    Type of Paper: Regular
    Id Paper: 374
    Topic: 17

  57. Thermal Sprayed Coatings For Heat Exchangers In Heat Storage Applications
    Patrick Masset1; Sebastian Schuster1;
    1FRAUNHOFER UMSICHT, Sulzbach-Rosenberg, Germany (Deutschland);
    Type of Paper: Regular
    Id Paper: 375
    Topic: 17

  58. Densified oxide based coatings for high temperature applications
    Christoph Weih1; Patrick Masset1; Gerhard Wolf1; Karl Thomas Fehr2; Sebastian Schuster1;
    1FRAUNHOFER UMSICHT, Sulzbach-Rosenberg, Germany (Deutschland); 2DEPT. FEHR GEO- & UMWELTWISSENSCHAFTEN, 80333, Germany (Deutschland);
    Type of Paper: Regular
    Id Paper: 376
    Topic: 17

  59. Recent developments in surface protection of titanium and titanium-aluminum alloys against environmental degradation at elevated temperatures
    Rossen Yankov1; Johannes von Borany1; Patrick Masset2; Alexander Donchev3; Michael Schuetze3;
    1INSTITUTE OF ION BEAM PHYSICS AND MATERIALS RESEARCH, HELMHOLTZ-ZENTRUM DRESDEN-ROSSENDORF (HZDR), Dresden, Germany (Deutschland); 2FRAUNHOFER UMSICHT, Sulzbach-Rosenberg, Germany (Deutschland); 3DECHEMA FORSCHUNGSINSTITUT, Frankfurt am Main, Germany (Deutschland);
    Type of Paper: Plenary
    Id Paper: 390
    Topic: 17

  60. Nouveau Test
    0; Claude Tetom1;
    1FLOGEN TECHNOLOGIES, Montreal, Canada;
    Type of Paper: Regular
    Id Paper: 23
    Topic: 6

  61. Cyclic Deformation Behavior of Rare-Earth Containing Lightweight Magnesium Alloys
    Foisal Mirza1; Daolun L. Chen1; Dejiang Li2; Xiaoqin Zeng2;
    1DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING, RYERSON UNIVERSITY, Toronto, Canada; 2SHANGHAI JIAO TONG UNIVERSITY, Shanghai, China;
    Type of Paper: Keynote
    Id Paper: 50
    Topic: 6

  62. Influence of Zn interlayer / coating on the ultrasonic spot-welded al-to-cu and al-to-steel joints
    Vikas Patel1; Sanjeev Bhole1; Daolun L. Chen1;
    1DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING, RYERSON UNIVERSITY, Toronto, Canada;
    Type of Paper: Regular
    Id Paper: 51
    Topic: 6

  63. Preparing the Melt for the Amorphous State, Aimed at Producing Nanocrystal Materials Possessing Improved Magnetic Properties
    Vladimir Tsepelev1; Vladimir Belozerov2; Yuri Starodubtsev2; Viktor Konashkov1; Vladimir Vyukhin1; Ann Latypova1;
    1BORIS YELTZIN URAL FEDERAL UNIVERSITY, Ekaterinburg, Russian Federation; 2GAMMAMET RESEARCH & PRODUCTION ENTERPRISE, Ekaterinburg, Russian Federation;
    Type of Paper: Regular
    Id Paper: 80
    Topic: 6

  64. Merging of Metal Nanoparticles via Wetting-Like Process
    Inna Popov1;
    1THE HEBREW UNIVERSITY OF JERUSALEM, Jerusalem, Israel;
    Type of Paper: Regular
    Id Paper: 85
    Topic: 6

  65. THE GOLDEN RATIO IN ATOMIC ARCHITECTURE
    Raji Heyrovska1;
    1PRIVATE RESEARCH SCIENTIST, Praha, Czech Republic;
    Type of Paper: Keynote
    Id Paper: 124
    Topic: 6

  66. Mechanical Behavior and Simulation of Load Sharing in Bundles of Ceramic-Fiber Composites
    Leandro Neckel1; Joao Gustavo Pereira da Silva2; Paula Guglielmi2; Hazim Ali Al-Qureshi3; Dachamir Hotza4;
    1UNESC, Criciuma, Brazil; 2TUHH, Hamburg, Germany (Deutschland); 3UFSC, Florianopolis, Brazil; 4UFSC, Davis, United States;
    Type of Paper: Regular
    Id Paper: 149
    Topic: 6

  67. Electron Microscopy Study of Strengthening Phases in Mg Alloys
    Wei Sun1;
    1INSTITUTE OF MICROSTRUCTURE AND PROPERTY OF ADVANCED MATERIALS, BEIJING UNIVERSITY OF TECHNOLOGY, Beijing, China;
    Type of Paper: Regular
    Id Paper: 200
    Topic: 6

  68. Designing & Evaluation of ANSI 852.0 Alloy as a Die Cast Material
    Chetan Shah1; Dr Vijay Mathane2; Dr Sanjay Soman2; Mandar Joshi3;
    1GROWELL INDUSTRIES, Vadodara, India; 2M.S.UNIVERSITY OF BARODA, Vadodara, India; 3INDUS UNIVERSITY, AHMEDABAD, India;
    Type of Paper: Regular
    Id Paper: 214
    Topic: 6

  69. Push-Pull Alloys and the Heritage of Dan Shechtman
    Jean-Marie Dubois1;
    1CNRS-UNIVERSITE DE LORRAINE, Nancy, France;
    Type of Paper: General Plenary
    Id Paper: 247
    Topic: 6

  70. Electrochemically Deposited Calcium Phosphate Coatings for Orthopedic and Dental Implants
    Noam Eliaz1;
    1TEL-AVIV UNIVERSITY, Tel-Aviv, Israel;
    Type of Paper: Keynote
    Id Paper: 252
    Topic: 6

  71. Elastic properties and acoustic waves attenuation in single-quasicrystalls Ag42In42Yb16
    Pavel Turchin1;
    1SIBERIAN FEDERAL UNIVERSITY, Krasnoyarsk, Russian Federation;
    Type of Paper: Regular
    Id Paper: 378
    Topic: 6

  72. Numerical Simulation and Theoretical Modeling of Longitudinal and Transverse Compressive Failure in Fiber Reinforced Composite Materials
    Takeaki Nadabe1; Nobuo Takeda2;
    1DEPARTMENT OF ADVANCED ENERGY, THE UNIVERSITY OF TOKYO, Kashiwa-shi, Japan; 2DEPARTMENT OF ADVANCED ENERGY, THE UNIVERISTY OF TOKYO, Kashiwa-shi, Japan;
    Type of Paper: Regular
    Id Paper: 389
    Topic: 6

  73. Ultra-thin Graphene Coating and Nanocrystalline Alloy Structure: The Novel Nanotechnologies for Remarkable Corrosion Resistance
    Raman Singh1;
    1MONASH UNIVERSITY, Monash University, Australia;
    Type of Paper: Plenary
    Id Paper: 392
    Topic: 6

  74. Importance of the interstitial region for producing magnetism in nanostructured Al-Cu-Fe phases
    Carlos Landauro1; Mirtha Pillaca2; Milida Pinto1;
    1SAN MARCOS UNIVERSITY, Lima, Peru; 2UNMSM, Lima, Peru;
    Type of Paper: Regular
    Id Paper: 393
    Topic: 6

  75. Experimental study of microstrain in the nanostructured w-Al70Cu20Fe10 phase
    Mirtha Pillaca1; Carlos Landauro2; Milida Pinto2;
    1UNMSM, Lima, Peru; 2SAN MARCOS UNIVERSITY, Lima, Peru;
    Type of Paper: Regular
    Id Paper: 395
    Topic: 6

  76. The magic of nanoplasmonics: from superhydrophobic and 3D suspended devices for SERS/TERS-like applications to hot-electrons based nanoscopy.
    Remo Proietti Zaccaria1;
    1ITALIAN INSTITUTE OF TECHNOLOGY, Genova, Italy;
    Type of Paper: Keynote
    Id Paper: 411
    Topic: 6

  77. The discovery of Quasi-Periodic materials
    Dan Shechtman1;
    1TECHNION, Haifa, Israel;
    Type of Paper: General Plenary
    Id Paper: 413
    Topic: 6