Volume 9: Iron and Steel, Metals and Alloys

• Science and Technology – The Grand Disruptors and Solution Providers, sips17_46_370FS, Florian Kongoli
• Science and Beauty of Crystals, sips17_46_366, Dan Shechtman
  
• Good and Bad Bacteria - Science/Human Synergies, sips17_46_365, Ada Yonath
  
• The discovery and role of nitric oxide and cyclic GMP in biological signaling, sips17_46_367, Ferid Murad
  
• Creative Approaches to Chemical Sustainability, sips17_46_364, Donna J. Nelson
  
• YILDIRIM Group: A Diversified Multinational Conglomerate That Simultaneously Achieves Growth, Social Development And Environmental Protection, sips17_46_357, Robert Yuksel Yildirim
  
• The European Environmental Policies: A Vector Aiming to Sustainability, sips17_46_354, Patricio Barrios
  
• Oxidative Stress: from Life Sustainability to Life Unsustainability: from Blood Regulation in Brain to Alzheimer Disease, sips17_42_300FS, Christian Amatore
  
• Interfaces: small Features for big Achievements in Sustainable Materials, sips17_46_294, Dominique Chatain
  
• High Efficiency of Renewable Energy Sources Through SPD Processing Of Bulk Nanostructured Solids, sips17_46_348, Michael Zehetbauer
  
• Evaluation of Subvention Schemes for Lignite Electricity Plants in the Aftermath of the Paris Agreement - 2015, sips17_46_358, Tamer Turna
  
• Perspectives on the Role of New and Advanced Materials and Technologies for Energy, Environment and Sustainability, sips17_46_42, Fernand Marquis
  
• Electricity Production Choices and Consequences, sips17_46_359, Harold Dodds
  
• Leather and Lace: Adventures of a Female Academic in Entrepreneur-land, sips17_46_369, Janna Maranas
  
• Interface engineering for next generation rechargeable batteries: An Overview and Perspectives, sips17_46_373, Katerina Aifantis
  
• The Development and Business Value of Modern Process Mineralogy, sips17_5_325FS, Norman O. Lotter
  
• Human Heart Beat Simulation Based on Fluid-Structure Interaction, sips17_38_346, Dean Vucinic
  

• Natural Resources Consciousness and Energy Conservation in Ironmaking and Steelmaking Technologies in Japan(Plenary), sips17_2_121
  Usui, Tateo; Naito, Masaaki; Ono, Hideki; Konishi, Hirokazu; Kawabata, Hirotoshi; Mizukoshi, Tomoyuki; Assis, Paulo;
  
• Characterization of Peruvian Linz Donawitz-LD Steel Sludges(Plenary), sips17_2_103
  Gomez-marroquin, Mery Cecilia; D'Abreu, Jose Carlos;
  
• Mathematical Modeling of SER Jet-emulsion Process(Keynote), sips17_2_180FS
  Tsymbal, Valentin; Olennikov, Alexey; Rybenko, Inna; Sechenov, Pavel; Kongoli, Florian;
  
• Basic Physicochemical Principles of ORIEN Process - a Direct Iron Ore to Steel Technology(Keynote), sips17_2_192FS
  Dorofeev, Genrikh; Kongoli, Florian;
  
• Efficiency Improvement of Blast Furnace Main Iron Trough Castable Refractory Consumption with 3D Laser Scan Analysis(Keynote), sips17_2_134
  Acar, Emre; Furtun, Fikret;
  
• Influence of Improvement of the Sinter Screening in CSA Blast Furnace Process, sips17_2_317FS
  Silva, Geovane; Pinheiro Da Silva, Bruno; Hirano, Andre; Landin, Marilene; Pereira Cangani, Maxwell; Landin, Ennes;
  
• Optimization of the Sinter Product Specification CSA and Its Impacts in the Blast Furnace Process, sips17_2_316FS
  Pereira Cangani, Maxwell; Galiazzi, Cristiane; Silva, Geovane; Pereira, Rafael;
  
• Research of Applying Rare-earth Metals to Improve the Quality of Transport Steels, sips17_2_78
  Smirnov, Leonid;
  
• Self-reducing Agglomerates: Metallization, Phase Morphologies and Carburization Kinetics(Keynote), sips17_2_173
  Tinoco Falero, Edelink Efrain; D Abreu, Jose Carlos; Ohler - Martins, Karla;
  
• The Approach of Industrial Ecology for Long Term Solutions for Industrial Wastes, sips17_2_46
  Von Kruger, Paulo;
  
• Cleaning Process of the Coarse Steel Maker Sludge with Recovery of the Metallic Content And Consequent Carbon Sequestration, sips17_2_200FS
  Souza, Erivelto; Araujo, Fernando Gabriel Silva; Oliveira, Cristovam Paes; Lopes Gomes, Jose Emanuel;
  
• Prediction of Strength and Productivity of Sinter by Using the Various Physicochemical Properties of Iron Ores, sips17_2_53FS
  Yang, Young Cheol;
  

• Investigation of Adiabatic Heat Rise and Its Effect on Flow Stresses and Microstructural Changes During High Strain Rate Deformation of Ti₆Al₄V Alloy(Invited), sips17_3_329FS
  Dawari, Ashish; Kashyap, B.p.; Singh, R.K.P.;
  
• Pyrometallurgical Processing of Different Arsenic Materials and Waste with Arsenic Output to Compact Non-toxic Product, sips17_3_152FS
  Shumskiy, Viktor; Klimenko, V.v.; Mikhailov, A.m.;
  
• Impact of Refractory Lining in the Life-cycle of a 42 MW Electric Arc Furnace for Fe-Ni Production in Newco Ferronikeli, sips17_3_47FS
  Imeri, Shefik; Tahiraj, Naim; Kongoli, Florian;
  
• Heat-resistant and Refractory Alloys for Special Destination, sips17_3_91FS
  Kandelaki, Aleksandre; Mikadze, Omar; Mikadze, George; Mirijanashvili, Zurab; Garibashvili, Vazha;
  
• Three-dimensional Computer Models as a Tool for Verification of Phase Diagrams, sips17_3_80
  Vorob'eva, Vera; Lutsyk, Vasily; Parfenova, Maria;
  
• Effect of Austempering Temperature and Time on Mechanical Properties of SAE 9260 Steel, sips17_3_309
  Dalwatkar, Ranjit;
  
• Analytical Modelling of Surface Temperature in Cylindrical Grinding(Poster), sips17_3_344FS
  Thanedar, Azhar; Hiremath, Panchakshari; Joshi, Suhas; Singh, Rajkumar;
  
• Control of Melting Process Quality Using by Thermal Analysis of Molten Metal in Production of Ductile Iron(Poster), sips17_3_65FS
  Futas, Peter; Pribulova, Alena; Petrik, Jozef; Junakova, Andrea;