CD-SIPS2015_Volume
< CD shopping page

2015-Sustainable Industrial Processing Summit
SIPS 2015 Volume 2: Gudenau Intl. Symp. / Iron and Steel Making

Editors:Kongoli F, Kleinschmidt G, Pook H, Ohno K, Wu K
Publisher:Flogen Star OUTREACH
Publication Year:2015
Pages:340 pages
ISBN:978-1-987820-25-6
ISSN:2291-1227 (Metals and Materials Processing in a Clean Environment Series)

    Conveyor Cooling Effects on the Wire Rod Residual Stresses during Production

    Panagiotis Sismanis1;
    1SIDENOR SA, Marousi, Greece;
    Type of Paper: Regular
    Id Paper: 289
    Topic: 2

    Abstract:

    In the recent years, industrial practice has proven that a more ductile wire rod can be produced by reducing the cooling rate of the produced wire during its travel on the conveyor, just after the laying head. This is important for low carbon wire rod (Ał5.5 mm) that is used for end-user applications which require relatively small -sometimes even below Ał1 mm- final wire diameters; it is succeeded by covering the moving wire with specific covers insulated by a low density ceramic material. In this way, the material exhibits lower hardness, and larger percent-elongation values at breakage. Residual stresses coming from thermal stresses during cooling at the conveyor are considered to be a reason and a short computational study was carried out in order to prove this assumption. A special computer program that takes under consideration the thermal, stress, and strain phenomena across a section of the wire rod based upon existing theory was developed. It seems that residual stresses can be attributed upon cooling schemes, verifying industrial practice. Similar phenomena have been analyzed for wire rods quenched up to certain depths, which will be presented as well.

    Keywords:

    Industry; Metallurgy; Modeling; Process; Steel; Temperature;

    References:

    [1] T.T. Gahane, V. Varghese, and N.W. Khobragade: Transient Thermoelastic Problem of a Cylinder with Heat Source, Int. J. Latest Trend Math, 2 (2012), 25-36
    [2] N. Noda, Y. Ootao, and Y. Tanigawa: Transient Thermoelastic Analysis for a Functionally Graded Circular Disk with Piecewise Power Law, J. of Theoretical & Applied Mechanics, 50 (2012), 831-839
    [3] C.M. Bhongade, and M.H. Durge: Quasi Static Thermal Stresses in a Limiting Thick Circular Plate with Internal Heat Generation due to Axisymmetric Heat Supply, Int. J. Math & Stat Invention, 1 (2013), 56-63
    [4] D.B. Kamdi, N.W. Khobragade, and M.H. Durge: Transient Thermoelastic Problem for a Circular Solid Cylinder with Radiation, Int. J. Pure & Applied Math, 54 (2009), 387-406
    [5] N.I. Kobasko, M.A. Aronov, K. Ichitani, M. Hasegawa, and K. Noguchi, Proceedings of the Ninth International Conference on Fluid Mechanics, Heat & Mass Transfer, and Biology, Harvard, Cambridge, 2012. Ed. M. K. Jha, M. Lazard, A. Zaharim, and K. Sopian, 35-40
    [6] N.K. Lamba, and N.W. Khobragade: Analysis of Coupled Thermal Stresses in an Axisymmetric Hollow Cylinder, Int. J. Latest Trend Math, 1 (2011), 29-38
    [7] V. Radu, N. Taylor, and E. Paffumi: Development of new Analytical Solutions for Elastic Thermal Stress Components in a Hollow Cylinder under Sinusoidal Transient Thermal Loading, Int. J. Pressure Vessels & Piping, 85 (2008), 885-893
    [8] S.P. Pawar, K.C. Deshmuck, and G.D. Kedar: On Termal Stresses in an Infinite Body Heated by Continuous Point Source inside it, J. of Thermoelasticity, (1), 4, 2013
    [9] S.P. Pawar, K.C. Deshmuck, and G.D. Kedar: Effect of Heat Generation on Quasi Static Thermal Stresses in a Solid Sphere, IOSR J. of Mathematics, (7), 5, 2013, 21-29
    [10] K.R. Gaikwad, and K.P. Ghadle: Quasi Static Thermoelastic Problem of an Infinitely Long Circular Cylinder, J. KSIAM, (14) 2010, 141-149
    [11] A.R. Shahani, and S.M. Nabavi: Analytical Solution of the Quasi Static Thermoelasticity Problem in a Pressurized Thick-Walled Cylinder subjected to Transient Thermal Loading, Applied Mathematical Modelling, (31) 2007, 1807-1818
    [12] J.A. Lopez Molina, and M. Trujillo, Proceedings of the Second WSEAS Int. Conf. on Applied and Theoretical Mechanics, Venice, 2006. Ed. D. Mijuca, S. Maksimovic, 63-67
    [13] A. Kandil, A.A. El-Kady, A. El-Kafrawy: Transient Thermal Stress Analysis of Thick-Walled Cylinders, Int. J. Mech. Sci., (37) 1995, 721-732
    [14] J. Xu: Effect of Residual Stresses and Cold-Straightening on the Compressive Resistance of Solid Round Steel Columns, Master Thesis, Ryerson University, Toronto, 2007
    [15] S. Jahanian: Thermoelastoplastic Stress Analysis of a Thick-Walled Tube of Nonlinear Strain Hardening, Trans. of the ASME, (118) 1996, 340-346
    [16] W. Porto de Oliveira, M.A. Savi, P.M.C.L. Pacheco, and L.F. G. de Souza: Thermomechanical Analysis of Steel Cylinders Quenching using a Constitutive Model with Diffusional and non-Diffusional Phase Transformations, Mechanics of Materials, (42) 2010, 31-43
    [17] P.M.C.L. Pacheco, M.A. Savi, and A.F. Camarao: Analysis of Residual Stresses generated by Progressive Induction Hardening of Steel Cylinders, J. of Strain Analysis, (36) 2001, 507-516
    [18] P.M. Salve, and S.A. Meshram: Transient Thermoelastic Problem in a Thick Circular Plate with an Axisymmetric Temperature, Int. J. Pure Appl. Sci. Technol., (14) 2013, 1-8
    [19] G.D. Kedar, and K.C. Deshmuck: Estimation of Temperature Distribution and Thermal Stresses in a Thick Circular Plate, African J. Mathematics & Computer Science Research, (4) 2011, 389-395
    [20] N. Zabaras, S. Mukherjee, and W.R. Arthur: A Numerical and Experimental Study of Quenching Circular Cylinders, J. of Thermal Stresses, (10) 1987, 177-191
    [21] H.G. Landau, J.H. Weiner, and E.E. Zwicky JR: Thermal Stress in a Viscoelastic-Plastic Plate with Temperature-Dependent Yield Stress, Trans. of ASME, J. Appl. Mech., 1960, 297-302
    [22] H.G. Landau, and E.E. Zwicky JR: Transient and Residual Thermal Stresses in an Elastic-Plastic Cylinder, Trans. of ASME, J. Appl. Mech., 1960, 481-488
    [23] B.A. Boley, and J.H. Weiner, Theory of Thermal Stresses, 1960, copyright by John Wiley & Sons, reprinted in 1997 by Dover Publications, Inc, chapter 16
    [24] T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. Dewitt, Fundamentals of Heat and Mass Transfer, 7th edition, 2011, John Wiley & Sons, chapters 7, 9, and 12
    [25] W.M. Rohsenow, J.P. Hartnett, and Y.I. Cho, Handbook of Heat Transfer, 3rd edition, 1998, McGraw-Hill, chapter 2, 16
    [26] EN 1993-1-2 (2005) (English): Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
    [27] T. Paloposki, and L. Liedquist: Steel Emissivity at High Temperatures, Res. Notes 2299, VTT, Technical Research Centre of Finland, 2005, 81
    [28] F. Bierbrauer, and J. Chen: A Study on the Surface Emissivity of Oxidized Steel using a Three Layer Model, APMC, (2) 1993, 11-14
    [29] S.V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation, 1980, Washington
    [30] P. Sismanis: Heat Transfer Analysis of Special Reinforced NSC-Columns under Severe Fire Conditions, International Journal of Materials Research, (101) 2010, DOI 10.3139/146.110290, 417-430
    [31] P. Sismanis, Two Phase Flow, Phase Change and Numerical Modeling. 2011, Rijeka, Croatia, Ed. Amimul Ahsan, 121-148
    [32] P. Sismanis, Proc. of the 8th European Continuous Casting Conference and Symposium in Numerical & Physical Modeling, Graz, Austria, 2014, ASMET, 1462-1471
    [33] P. Sismanis, Heat Transfer, Rijeka, Croatia, Ed. M. Salim Newaz Kazi, (to be published)
    [34] M. Uehara, I.V. Samarasekera, and J.K. Brimacombe, Continuous Casting, Vol. 4, Ed. T.B. Harabuchi, and R.D. Pehlke, The Iron & Steel Society, 1988, Warrendale, PA, 159
    [35] J.M. Franssen, and P.V. Real, Fire Design of Steel Structures: Eurocode 1: Actions on structures Part 1-2-General actions- Actions on structures exposed to fire Eurocode 3: Design of Steel Structures Part 1-2-General Rules-Structural Fire Design, Annex C: Mechanical Properties of Carbon Steel and Stainless Steel, 2012, ECCS
    [36] A.A. Gorni, Steel Forming and Heat Treating Handbook, On-line edition, 2015, Sao Vicente SP, Brazil
    [37] M.L. James, G.M. Smith, and J.C. Wolford, Applied Numerical Methods for Digital Computation with FORTRAN and CSMP, Harper & Row, Publishers, 1977, New York, 5
    [38] Omega Engineering, Table of Total Emissivity, online datasheet, www.omega.com, 2015, Stamford, Connecticut
    [39] E.A. Brandes, Smithells Metals Reference Book, 6th edition, 1983, Butterworth & Co, London, UK, 17
    [40] J. Lubliner, Plasticity Theory, Dover Publications, 2008, New York, 4.3.4
    [41] A. Flampouri, and F. Tzevelekou: Determination of scale formation in semi-finished S500 steel products during their thermal processing, ELKEME (Hellenic Centre for Metals Processing), report 5404_SOVEL, 2013, Athens.

    Full Text:

    Click here to access the Full Text

    Cite this article as:

    Sismanis P. Conveyor Cooling Effects on the Wire Rod Residual Stresses during Production. In: Kongoli F, Kleinschmidt G, Pook H, Ohno K, Wu K, editors. Sustainable Industrial Processing Summit SIPS 2015 Volume 2: Gudenau Intl. Symp. / Iron and Steel Making. Volume 2. Montreal(Canada): FLOGEN Star Outreach. 2015. p. 215-232.