2015-Sustainable Industrial Processing Summit
SIPS 2015 Volume 8: Composite & Ceramic, Quasi-crystals and Nanomaterials
| Editors: | Kongoli F, Pech-Canul M, Kalemtas A, Werheit H |
| Publisher: | Flogen Star OUTREACH |
| Publication Year: | 2015 |
| Pages: | 300 pages |
| ISBN: | 978-1-987820-31-7 |
| ISSN: | 2291-1227 (Metals and Materials Processing in a Clean Environment Series) |
< CD shopping page
Electrochemical Performance of Sn–Ni/MWCNT Nanocomposite Electrodes Prepared by Pulse Electrodeposition for Li ion Battery
Mehmet Uysal1; Tugrul Cetinkaya2; Harun Gul3; Mirac Alaf4; Ahmet Alp2; Hatem Akbulut2;1SAKARYA UNIVERSITY METALLURGICAL MATERIALS ENGINEERING, Sakarya, Turkey; 2SAKARYA UNIVERSITY, Sakarya, Turkey; 3DUZCE UNIVERSITY, Duzce, Turkey; 4BILECIK PEYH EDEBALI UNIVERSITESI, Bilecik, Turkey;
Type of Paper: Regular
Id Paper: 394
Topic: 18
Abstract:
The effects of coating thickness on the cyclic performance of Sn-Ni/MWCNT nanocomposite electrodes were investigated in this study. Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse electrodeposition on a copper substrate in a pyrophosphate bath. Sn-Ni/MWCNT composites were characterized by scanning electron microscopy (SEM). X-ray diffraction analysis was carried out to investigate structure of Sn-Ni/MWCNT composites. Cyclic voltammetry (CV) tests were performed to reveal the reversible reactions of nickel-tin with lithium. The electrochemical performances of Sn-Ni/MWCNT composite electrodes have been investigated by charge/discharge tests, cyclic voltammetric experiments and the ac impedance technique. These cells discharge capacity cyclically tested by a battery tester at a constant current in voltage range between 0.02 V – 1.5 V. The thickness of composite coatings was shown to be a crucial factor to improve Sn-Ni /MWCNT composite anodes for cyclability and reversible capacity.
Keywords:
Coatings; Composites; Li-Ion;References:
[1] Dongdong Jiang & Haiying Tian & Chenchen Qiu & Xiaohua Ma & Yanbao Fu Electrodeposition and characterization of assembly of Sn on Cu nanorods for Li-ion microbattery application J Solid State Electrochem (2011) 15:2639–2644[2] C. Shuangqiang, W. Yong, A. Hyojun, W. Guoxiu J Power Sources 216 (2012) 22-27
[3] S. Wenhui, R. Xianhong, Z. Jixin, Y. Qingyu J. Phys. Chem. C, 116 (2012) 26685–26693
[4] Xin Fan & Xiaona Tang & Daqian Ma & Peng Bi & Anni Jiang & Jin Zhu & Xinhua Xu Novel hollow Sn–Cu composite nanoparticles anodes for Li-ion batteries prepared by galvanic replacement reaction J Solid State Electrochem (2014) 18:1137–1145
[5] Marappan Sathish & Satoshi Mitani & Takaaki Tomai & Atsushi Unemoto & Itaru Honma Nanocrystalline tin compounds/graphene nanocomposite electrodes as anode for lithium-ion battery J Solid State Electrochem (2012) 16:1767–1774
[6] Jusef H , Giuseppe AE, Stefania P, Bruno S A high capacity, template-electroplated Ni–Sn intermetallic electrode for lithium ion battery Journal of Power Sources 2011; 196;7767– 7770
[7] Xiao-Yong Fan & Fu-Sheng Ke & Guo-Zhen Wei & Ling Huang & Shi-Gang Sun Lithiation/delithiation performance of Sn–Co alloy anode using rough Cu foil as current collector J Solid State Electrochem (2009) 13:1849–1858
[8] Xin-Jing Pang • Chun-Hui Tan • Xiao-Hui Dai • Xin Wang • Gong-Wei Qi • Shu-Yong Zhang Performance enhancement of Sn–Sb–Co alloy film anode for lithium-ion batteries via post electrodissolution treatment
[9] Ling H, Hong-Bing W, Fu-Sheng K, Xiao-Yong F, Jun-Tao L, Shi-Gang S Electrodeposition and lithium storage performance of three-dimensional porous reticular Sn–Ni alloy electrodes Electrochimica Acta 2009;54: 2693–2698
[10] Ling H, Jin-Shu C,Yang H,Fu-Sheng K, Shi-Gang S Structure and electrochemical performance of nanostructured Sn–Co alloy/carbon nanotube composites as anodes for lithium ion batteries Electrochemistry Communications 2009;11: 950–953
[11] Jizhang C, Li Y, Shaohu F, Zhengxi Z, Shin-ichi H Facile fabrication of graphene/Cu6Sn5 nanocomposite as the high performance anode material for lithium ion batteries Electrochimica Acta 2013; 105:629–634
[12] Wang G., Ma Y.Q., Liub Z.Y, Wu J.N. Novel highly porous Sn–C composite as high performance anode material for lithium-ion batteries Electrochimica Acta 2012; 65:275– 279
[13] Yang H, Ling H , Jin-Shu C, Xiao-Mei Z, Shi-Gang S Structure and electrochemical performance of nanostructured Fe3O4/carbon nanotube composites as anodes for lithium ion batteries Electrochimica Acta 2010;55: 1140–1144
[14] Yong W, Minghong W, Zheng J and Jim Yang L Sn@CNT and Sn@C@CNT nanostructures for superior reversible lithium ion storage Chem. Mater., 2009;21 :3210–3215
[15] Guo Z.P., Zhao Z.W., Liu H.K., Dou S.X. Electrochemical lithiation and de-lithiation of MWNT–Sn/SnNi Nanocomposites Carbon 2005; 43:1392–1399
[16] Hong G, Hailei Z, Xidi J, Spherical Sn–Ni–C alloy anode material with submicro/micro complex particle structure for lithium secondary batteries electrochemistry Communications 2007;9:2207–2211
[17] Jianchao H , Hailei Z,, Mengwei W, Xidi J Preparation and characterization of Co-Sn-C anodes for lithium-ion batteries Materials Science and Engineering B 2010;171: 35–39
[18] Min-Sik P, Rajendran S., Yong-Mook K, Kyu-Sung H, Young-Soo H, Jai-Young L Sn–Ni alloy–graphite composite synthesized by arc-melting and high-energy mechanical milling for use as an anode in lithium-ion batteries Journal of Power Sources 2006;158: 650–653
[19] S Ranjan, D Siddhartha, D Karabi. Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni–CeO2 nanocomposite coating. Mater Res Bull 47(2012) 478–485
[20] SA Lajevardi, T Shahrabi. Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings. Appl Surf Sci 256 (2010) 6775–6781
[21] Tocoglu U., Alaf M., Cevher O., Guler M. O., and Akbulut H., J.Nanosci. Nanotechno. 2012; 12: 9169–9174
[22] Chen X.H., Chen C.S., Xiao H.N., Liua H.B., Zhou L.P., Li S.L., Zhang G. Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits Tribology International 2006;39: 22–28
[23] Yanxia Tang , Xiaomin Yang , Rongrong Wang , Maoxin Li Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids Materials Science & Engineering A 599 (2014) 247–254
[24] Choi E.K., Lee K.Y., Oh T.S. Fabrication of multiwalled carbon nanotubes-reinforced Sn nanocomposites for lead-free solder by an electrodeposition process Journal of Physics and Chemistry of Solids 2008;69: 1403–1406
[25] R.M. Gnanamuthu, Chang Woo Lee Electrodeposition and electrochemical investigation of thin film Sn–Co–Ni alloy anode for lithium-ion batteries Materials Science and Engineering B 176 (2011) 1329–1332
[26] L. Chang-ming, Z. Ren-yuan, L. Wei-shan Z. Ling-zhi, H. She-jun, R. Mu-min, X. Jian-xia, Trans. Nonferrous Met. Soc. China 17(2007) 934-936
[27] Hassoun J., Panero S., Scrosati B. Electrodeposited Ni–Sn intermetallic electrodes for advanced lithium ion batteries Journal of Power Sources 2006;160: 1336–1341
[28] Kei N, Kaoru D, Koji K, Sang-Wook W, Kiyoshi K Three-dimensionally ordered macroporous Ni–Sn anode for lithium batteries Journal of Power Sources 2009;189: 726–729
[29] Dongdong J, Xiaohua M, Yanbao F High-performance Sn–Ni alloy nanorod electrodes prepared by electrodeposition for lithium ion rechargeable batteries J Appl Electrochem 2012; 42:555–559
[30] Yuhai H, Xifei L , Dongsheng Geng, Mei Cai, Ruying Li , Xueliang Sun Influence of paper thickness on the electrochemical performances of graphene papers as an anode for lithium ion batteries Electrochimica Acta 2013; 91 : 227– 233
[31] Moon T., Kim C., Park B., J. Power Sources 2006;155:391-394.
[32] Hong G, Hailei Z, Chaoli Y, Weihua Q A nanosized silicon thin film as high capacity anode material for Li-ion rechargeable batteries Materials Science and Engineering B 2006;131:173–176
[33] Honghe Z, Jing L,Xiangyun S, Gao L, Vincent S. B A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes Electrochimica Acta 2012;71: 258–265
[34] Mukaibo H., Momma T., Osaka T. Changes of electro-deposited Sn–Ni alloy thin film for lithium ion battery anodes during charge discharge cycling Journal of Power Sources 2005; 146 :457–463