ORALS

SESSION: AdvancedMaterialsTuePM2-R10	6th Intl. Symp. on New & Advanced Materials & Technologies for Energy, Environment, Health & Sustainable Development
Tue. 29 Nov. 2022 / Room: Saitong
Session Chairs: Inmaculada Ortiz; Session Monitor: TBA

15:55: [AdvancedMaterialsTuePM209] OS
Ruddlesden-Popper-type Nd2-xNi0.75Cu0.2M0.05O4±δ (x = 0 and 0.1; M = Ga, Sc and In) layered oxides as candidate materials for MIEC-type ceramic membranes
Konrad Swierczek¹ ; Anna Niemczyk¹ ; Anna Olszewska¹ ; Zijia Zhang² ; Hailei Zhao² ; Kacper Cichy³ ; ¹AGH University of Science and Technology, Faculty of Energy and Fuels, Krakow, Poland; ²University of Science and Technology Beijing, School of Materials Science and Engineering, Beijing, China; ³AGH University of Science and Technology, Krakow, Poland;
Paper Id: 138 [Abstract]

Ceramic membranes, due to their high permeability, ability to work in the aggressive environment, including high temperature and high pressure, chemical and mechanical stability seem to be promising substitution compared to the commonly used polymeric membranes. Despite their higher investment cost, in relation to the organic membranes, ceramic gas separators are more economically favourable in long term perspective (slower degradation) [1,2] Similarly to Solid Oxide Fuel Cells (SOFCs) and Solid Oxide Electrolyzer Cells (SOECs), membrane technologies are considered as one of the basic solution in so-called Grand Energy Transmission [3-5]. Ruddlesden-Popper-type (RP) oxides usually possess mixed ionic-electronic conductivity, which is a crucial requirement for the effectively-working ceramic membranes. Ionic transport in the considered group of materials might be realized by the vacancy mechanism (in the perovskite-type layer) or by rather unusual interstitial mechanism employing interstitial oxygen. In this work RP Nd_2-xNi_0.75Cu_0.2M_0.05O_4±δ (x = 0 and 0.1; M = Ga, Sc and In) oxides were obtained by a sol-gel route and characterized concerning phase composition and crystal structure. Among the materials, Nd_2-xNi_0.75Cu_0.2Ga_0.05O_4±δ (x = 0; 0.1) were selected, with systematic characterization of the crystal structure at high temperatures, oxygen content, as well as transport properties measured. It is shown that the Nd-site deficiency causes decrease of the oxygen content, which at high temperatures leads to a change of the dominant type of defects from the oxygen interstitials to the vacancies. Importantly, both examined Ga-containing materials exhibit full chemical stability in CO₂ atmosphere, which makes them good candidates for air separation technology. Ceramic membranes manufactured using Nd₂Ni_0.75Cu_0.2Ga_0.05O_4±δ and Nd_1.9Ni_0.75Cu_0.2Ga_0.05O_4±δ fine powders allowed to obtain very high oxygen fluxes equal to 0.69 mL cm^-2 min^-1 and 0.78 mL cm^-2 min^-1 at ca. 880 °C, respectively for 0.9 mm thick pellets. Moreover, it is shown for Nd₂Ni_0.75Cu_0.2Ga_0.05O_4±δ-based pellet that infiltration of the grains with the higher order RP oxide (e.g. La₄Ni₃O₁₀) combined with reduced thickness of the membrane allows to maximize oxygen flux values, with one of the highest reported oxygen fluxes measured for CO₂-stable RP-based ceramic membrane, i.e. 0.94 mL cm^-2 min^-1 at ca. 880 °C for 0.6 mm thick dense membrane.

References:
[1] J. Garcia-Fayos, J. M. Serra, M. W. J. Luiten-Olieman and W. A. Meulenberg, Gas separation ceramic membranes. Advanced Ceramics for Energy Conversion and Storage, Elsevier 2020
[2] H. A. Meinema, R. W. J. Dirrix, H. W. Brinkman, R. A. Terpstra, J. Jekerle and P. H. Kösters, InterCeram Int. Ceram. Rev., 2005, 54, 86-91
[3] A. Fargere, B. Kolodziejczyk, J. Carton, L. Lapeña Martinez, A. Pica Téllez, C. Karaca, Y. Chae and L. Fuselli, Hydrogen an enabler of the Grand Transition, 2018
[4] I. Staffell, D. Scamman, A. Velazquez Abad, P. Balcombe, P. E. Dodds, P. Ekins, N. Shah and K. R. Ward, Energy Environ. Sci., 2019, 12, 463-491
[5] M. Gotz, J. Lefebvre, F. Mors, A. McDaniem Koch, S. Bajohr, R. Reimert and T. Kolb, Renewable Energy, 2016, 85, 1371-1390

SESSION: AdvancedMaterialsTuePM2-R10	6th Intl. Symp. on New & Advanced Materials & Technologies for Energy, Environment, Health & Sustainable Development
Tue. 29 Nov. 2022 / Room: Saitong
Session Chairs: Inmaculada Ortiz; Session Monitor: TBA

16:45: [AdvancedMaterialsTuePM211] OS
A promising alternative for oxygen production – application of air-operating <i>R</i>MnO_3+δ oxides in low-temperature TSA
Kacper Cichy¹ ; Konrad Swierczek² ; Juliusz Dąbrowa³ ; ¹AGH University of Science and Technology, Krakow, Poland; ²AGH University of Science and Technology, Faculty of Energy and Fuels, Krakow, Poland; ³AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Kraków, Poland;
Paper Id: 205 [Abstract]

The oxygen demand for medical and industrial needs grows over 6% annually from 2015, and it is estimated that the oxygen market will grow from $27.7 billion in 2019 to even $ 36.5 billion in 2030 [1]. According to The Business Research Company, this growth will be also driven by COVID-19 and the medical needs it imposes [1].<br /> Today, most of the oxygen produced for large-scale industry needs is obtained by cryogenic distillation, which due to the high energy consumption of the liquefaction of gases from the air, is an expensive method [2]. A promising alternative to the cryogenic oxygen production technology is air separation by temperature-swing adsorption (TSA) where so-called oxygen storage materials (OSM) are used. OSMs can reversibly exchange a significant amount of oxygen between their structure and atmosphere.<br /> In the last 2 decades, renewed interest in <i>R</i>MnO_3+δ oxides appeared, in terms of their application as OSMs. Their main advantage (contrary to other groups of OSMs, [3]) is the ability to work in the temperature-swing mode at temperatures as low as 200-300 °C, which is promising from both, economical and construction points of view. However, until now most of those materials operated effectively only in pure O₂ atmosphere, which is not applicable for oxygen production.<br /> A significant breakthrough has come with the results of the recent research, as it was possible to design <i>R</i>MnO_3+δ materials able to operate in air practically as effectively as in O₂ atmosphere [4]. Also, some general rules were established in terms of designing such air-operating OSMs, like dependence of oxygen storage capacity (OSC) on ionic radius of R.<br /> Nd-substituted Y_1-xNd_xMnO_3+δ materials described in this work were synthesized via sol-gel auto-combustion method followed by several variations of annealing at elevated temperatures in different atmospheres. Crystal structure and phase composition of prepared powders were examined by means of X-ray diffractometry (XRD). Oxygen storage performance was evaluated using thermogravimetry. Structure and composition of oxidized samples were also investigated by XRD. Morphology of powders was examined by scanning electron microscopy.<br /> It was established that proper modification of the preparation route of the Nd-substituted Y_1-xNd_xMnO_3+δ can increase the OSC more than twice and greatly improve the rate of redox reactions. The laboratory-scale apparatus for oxygen separation from air via TSA was designed and constructed. Equipment was tested using the YMnO3+δ-based materials developed in this work.

References:
[1] The Business Research Company, Oxygen Global Market Opportunities And Strategies (2020)\n[2] O. Parkkima, YBaCo4O_7+δ and YMnO_3+δ Based Oxygen-Storage Materials, PhD Thesis, Aalto University, Aalto, Finland, 2014\n[3] T. Motohashi, Y. Hirano, Y. Masubuchi, K. Oshima, T. Setoyama, S. Kikkawa, Chem. Mater. 25 (2013) 372-377\n[4] K. Cichy, K. Świerczek, K. Jarosz, A. Klimkowicz, M. Marzec, M. Gajewska, B. Dabrowski, Acta Mater. 205 (2021) 116544