This research explores the radiological shielding performance of hybrid composites made from aramid and linen fabrics embedded in an epoxy polymer matrix, reinforced with bismuth oxide (Bi2O3), using Monte Carlo N-Particle (MCNP) simulations. The study aims to assess gamma radiation attenuation by analyzing photon flux across composite layers and energy deposition within the material. The MCNP code was utilized to simulate gamma photon interactions, investigating the effects of Bi2O3 concentration, layer thickness, and fabric arrangement. Bi2O3, known for its high atomic number and density, significantly enhances the composite’s radiation attenuation capabilities while maintaining structural integrity. The results indicate substantial reductions in photon flux and efficient energy absorption, driven by the combined properties of aramid’s mechanical strength, linen’s eco-friendliness, and Bi2O3’s superior radiation-blocking capacity. The simulations highlight how composite design influences shielding effectiveness, providing valuable insights into developing lightweight, durable materials for radiological protection in medical imaging, aerospace, and industrial applications. This work lays the groundwork for experimental validation and optimization of Bi2O3-reinforced hybrid composites, advancing the development of sustainable, high-performance solutions for radiation shielding and contributing to safer and more efficient protective technologies.

This study investigates the radiological protection capabilities of hybrid composites composed of aramid and linen fabrics embedded in an epoxy polymer matrix, reinforced with graphene oxide (GO), through Monte Carlo N-Particle (MCNP) simulations. The research focuses on evaluating the attenuation of gamma radiation by analyzing photon flux between composite layers and energy deposition within the material structure. The MCNP code was employed to model the interaction of gamma photons with the hybrid composite, considering variations in GO concentration, layer thickness, and fabric stacking configurations. The incorporation of GO enhances the mechanical and shielding properties of the composite, leveraging its high electron density and dispersion within the epoxy matrix. Results demonstrate significant photon flux reduction and optimized energy absorption, influenced by the synergistic effects of aramid’s high tensile strength, linen’s sustainability, and GO’s radiation interaction capabilities. The simulations reveal the impact of composite design on shielding efficiency, offering insights into lightweight, flexible materials for radiological protection in medical, aerospace, and industrial applications. This work establishes a foundation for experimental validation and further optimization of GO-reinforced hybrid composites, contributing to the development of sustainable and high-performance radiation shielding solutions.

Natural lignocellulosic fibers (NLFs) have been widely studied as sustainable alternatives to synthetic fibers, standing out for being renewable, biodegradable, economically viable and for presenting good specific mechanical properties [1-3]. In this context, the present study aimed to evaluate the flexural strength of polyester matrix composites reinforced with short jute and piassava fibers. The fibers were used in their natural form, without surface treatment, cut to a length of 15 mm, and incorporated into the matrix by manual molding (hand lay-up) using silicone molds, without the application of pressure. The specimens were produced with randomly distributed discontinuous fibers, with mass fractions adjusted to the mold volume. The bending tests indicated that the pure polyester composite presented a bending stress of 112.12 ± 17.58 MPa, while the composites reinforced with jute and piassava fibers reached 59.16 ± 8.37 MPa and 62.48 ± 5.89 MPa, respectively, representing reductions of approximately 47% and 44% in relation to the pure matrix. Fractographic analysis of the rupture surfaces revealed that the failure of the composites was predominantly governed by fiber pull-out and low interfacial adhesion between fiber and matrix, also associated with the presence of internal voids resulting from the manual molding process. These factors contributed to the reduction of the mechanical efficiency of the composites, highlighting the need for surface treatments of the fibers and improvements in processing to optimize structural performance.