2018 - Sustainable Industrial Processing Summit & Exhibition
4-7 November 2018, Rio Othon Palace, Rio De Janeiro, Brazil
Seven Nobel Laureates have already confirmed their attendance: Prof. Dan Shechtman, Prof. Sir Fraser Stoddart, Prof. Andre Geim, Prof. Thomas Steitz, Prof. Ada Yonath, Prof. Kurt Wüthrich and Prof. Ferid Murad. More than 400 Abstracts Submitted from about 60 Countries.
Abstract Submission
Login

ADVANCE PROGRAM
Orals | Summit Plenaries | Round Tables | Posters | Authors Index

     


ORALS


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: IronMonAM-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Mon Nov, 5 2018 / Room: Mar Azul (50/1st)
Session Chairs: Florian Kongoli; Fausto Varela Cançado; Session Monitor: TBA

11:20: [IronMonAM01] Plenary
The Rise and Fall of the Northern Brazilian Pig Iron Production
Paulo Afonso Gomes1 ; 1Consultant, Belo Horizonte, Brazil;
Paper Id: 370 [Abstract]

11:45: [IronMonAM02] Plenary
Sustainable Production of Pig Iron in Brazil
Fausto Varela Cançado1 ; 1SINDIFER, Belo Horizonte, Brazil;
Paper Id: 376 [Abstract]

12:10: [IronMonAM03] Plenary
Viena Siderurgica: A Successful Story of Sustainable Pig Iron Production
Rodrigo Valladares1 ; 1Viena Siderúrgica S/A, Açailândia, Brazil;
Paper Id: 387 [Abstract]

12:35: [IronMonAM04] Plenary
FLOGEN CONTOP Design, Decision-Making, Control, Optimization and Automation System Applied at Brazilian Blast Furnaces
Paulo Afonso Gomes1 ; Marcos De Souza2 ; Florian Kongoli3 ; 1Consultant, Belo Horizonte, Brazil; 2FLOGEN Technologies Inc, Sao Paulo, Brazil; 3FLOGEN Technologies Inc., Mont-Royal, Canada;
Paper Id: 417 [Abstract]

13:00 LUNCH

SESSION: IronMonPM1-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Mon Nov, 5 2018 / Room: Mar Azul (50/1st)
Session Chairs: Tateo Usui; Jose Carlos D Abreu; Session Monitor: TBA

14:00: [IronMonPM105] Plenary
Characterization of Fine and Coarse Sludges of LD Peruvian Steelworks
Mery-cecilia Gomez Marroquin1 ; Kenny Salazar2 ; Jose Carlos D Abreu3 ; 1NATIONAL UNIVERSITY OF ENGINEERING, Lima, Peru; 2National University of Engineering, Lima, Peru; 3PUC-Rio, Rio de Janeiro, Brazil;
Paper Id: 134 [Abstract]

14:25: [IronMonPM106] Plenary
Reduction behavior of composite manganese ore-carbon: an analysis
Cyro Takano1 ; Jose Dabreu2 ; Ricardo Braga1 ; Ferry S Belisario Benique3 ; 1University of Sao Paulo, Sao Paulo, Brazil; 2PUC-Rio University, Rio de Janeiro, Brazil; 3Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil;
Paper Id: 401 [Abstract]

14:50: [IronMonPM107] Plenary
Rate Enhancement of Composite Iron Oxide Pellets by Using Semi-char and Semi-charcoal
Tateo Usui1 ; Hirokazu Konishi2 ; Kazuhira Ichikawa3 ; Hideki Ono2 ; Hirotoshi Kawabata2 ; Francisco Pena4 ; Matheus Souza5 ; Alexandre Xavier5 ; Paulo Assis6 ; 1Osaka University, Ibaraki, Japan; 2Osaka University, Suita, Japan; 3JFE Steel Corporation, Fukuyama, Japan; 4UFOP (Federal University of Ouro Preto), Ouro Preto, Brazil; 5UFOP, Ouro Preto, Brazil; 6UFOP (Federal University of Ouro Preto) / REDEMAT, Ouro Preto, Brazil;
Paper Id: 114 [Abstract]

15:15: [IronMonPM108]
Theoretical and Experimental Studies on Agglomeration of Fine Particles and Dispersion of Agglomerated Particles in Liquid
Yoshiei Kato1 ; Md. Azhar Uddin1 ; 1Okayama University, Okayama, Japan;
Paper Id: 110 [Abstract]

15:40 Break

SESSION: IronMonPM2-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Mon Nov, 5 2018 / Room: Mar Azul (50/1st)
Session Chairs: Cyro Takano; Juergen Antrekowitsch; Session Monitor: TBA

15:55: [IronMonPM209] Plenary
Steel Mill Dust — Only a Zinc Resource or a Potential Material for Multi Metal Recycling?
Juergen Antrekowitsch1 ; Gustav Hanke2 ; 1Christian Doppler Association, University of Leoben, Leoben, Austria; 2, Leoben, Austria;
Paper Id: 358 [Abstract]

16:20: [IronMonPM210] Plenary
Producing Steel with ORIEN Technology: A Case Study
Genrikh Dorofeev1 ; Florian Kongoli2 ; 1Ferro-Technology', Moscow, Tula, Russian Federation; 2FLOGEN Technologies Inc., Mont-Royal, Canada;
Paper Id: 375 [Abstract]

16:45: [IronMonPM211] Plenary
Improvements on Industrial Physical Processes Using Simulation
Nehemias Lacerda1 ; 1FEMTO Applied Sciences, Sao Jose dos Campos, Brazil;
Paper Id: 397 [Abstract]

17:10: [IronMonPM212] Plenary
Feasibility of Iron Production by Electrowinning
Jose Adilson De Castro1 ; Marcos De Campos1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 335 [Abstract]

17:35 Break

SESSION: IronMonPM3-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Mon Nov, 5 2018 / Room: Mar Azul (50/1st)
Session Chairs: Cyro Takano; Session Monitor: TBA

17:40: [IronMonPM313] Plenary
Metallization and Carburization Kinetic in DR Shaft Furnaces
Edelink Efrain Tinoco Falero1 ; Mauricio Otaviano2 ; Jose Carlos D Abreu1 ; 1PUC-Rio, Rio de Janeiro, Brazil; 2Samarco Mining Company, Ubu, Brazil;
Paper Id: 135 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: IronTueAM-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Tue Nov, 6 2018 / Room: Mar Azul (50/1st)
Session Chairs: Libor Kraus; Michael Potesser; Session Monitor: TBA

11:20: [IronTueAM01] Plenary
Microstructure-related Issues for Miniaturized Tensile Tests
Jan Dzugan1 ; Libor Kraus1 ; Karel Sperlink1 ; 1COMTES FHT Inc., Dobrany, Czech Republic;
Paper Id: 106 [Abstract]

11:45: [IronTueAM02] Plenary
Optimization Potentials for Steel Production from the Application of Oxygen Combustion
Michael Potesser1 ; Johannes Rauch2 ; Davor Spoljaric2 ; 1MPOT GmbH / Messer Group GmbH, Gumpoldskirchen, Austria; 2Messer Group, Gumpoldskirchen, Austria;
Paper Id: 118 [Abstract]

12:10: [IronTueAM03] Plenary
Numerical Simulation of Softening Layer Shape with Variable Size of Blast Furnace
Dongjo Lee1 ; 1POSCO, Pohang, South Korea;
Paper Id: 71 [Abstract]

12:35: [IronTueAM04] Plenary
Reduced Environmental Impact and Increased Energy and Material Recovery in the Ferro-alloy Industry Through Staged Combustion of Flue Gas
Bernd Wittgens1 ; Torbjørn Pettersen2 ; Benjamin Ravary3 ; Edin Myrhaug4 ; 1SINTEF, Trondheim, Norway; 2SINTEF Industry, 7034 Trondheim, Norway; 3Eramet Norway, Trondheim, Norway; 4ELKEM AS, Trondheim, Norway;
Paper Id: 54 [Abstract]

13:00 LUNCH

SESSION: IronTuePM1-R1
Afonso International Symposium on Advanced Sustainable Iron and Steel Making(6th Intl. Symp. on Advanced Sustainable Iron and Steel Making)
Tue Nov, 6 2018 / Room: Mar Azul (50/1st)
Session Chairs: Hemant Upadhyay; Shambhu Nath; Session Monitor: TBA

14:00: [IronTuePM105]
Importance of Coke Quality and Optimization for Higher Pulverized Coal Injection Rates in Blast Furnace
Hemant Upadhyay1 ; Deepesh Chandra2 ; Arvind Bhagat2 ; 1Jindal Steel & Power Ltd, Raigarh, India; 2Jindal Steel & Power Ltd, Raigarh, India;
Paper Id: 172 [Abstract]

14:25: [IronTuePM106]
Development and Application of Mathematical Models to Simulate Liquid Phase Accumulation, Drainage, and Heat Transfer in Blast Furnace Hearth
Hemant Upadhyay1 ; Deepesh Chandra2 ; Tarun Kumar Kundu3 ; 1Jindal Steel & Power Ltd, Raigarh, India; 2Jindal Steel & Power Ltd, Raigarh, India; 3Department of Metallurgical and Materials Engg, Kharagpur, India;
Paper Id: 173 [Abstract]

14:50: [IronTuePM107]
A Journey Towards Increasing Pulverized Coal Injection and Reduction in Coke Rate at F Blast Furnace - Tata Steel
Shambhu Nath1 ; 1Tata Steel, Jamshedpur, India;
Paper Id: 288 [Abstract]

15:15: [IronTuePM108]
Operating Line of COREX Process Based on Rist Diagram
C Srishilan1 ; Anand Vivek2 ; Ajay Shukla3 ; 1IIT MADRAS, Chennai, CHENNAI, India; 2JADAVPUR UNIVERSITY, KOLKATA, India; 3IIT Madras, CHENNAI, India;
Paper Id: 369 [Abstract]

15:40 Break

SESSION: ManufacturingTuePM3-R1
Metal Forming / Metal Removal Processing / Non-Conventional Techniques- ΙΙ
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Tue Nov, 6 2018 / Room: Mar Azul (50/1st)
Session Chairs: Paata Kervalishvili; Session Monitor: TBA

17:40: [ManufacturingTuePM313]
Improving the Efficiency of Machining Through Modifying Carbide Cutting Tips by Pulsed Magnetic Field Processing
Viktor Kovalov1 ; Yana Vasilchenko1 ; Maxim Shapovalov1 ; 1Donbas State Engineering Academy, Kramatorsk, Ukraine;
Paper Id: 419 [Abstract]

18:05: [ManufacturingTuePM314]
Improving the Accuracy of Heavy Lathes
Viktor Kovalov1 ; Yana Antonenko2 ; Marina Saenko1 ; 1Donbas State Engineering Academy, Kramatorsk, Ukraine; 2, Kramatorsk, Ukraine;
Paper Id: 418 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ManufacturingWedAM-R1
High Strain-Rate Phenomena / Treatment under Shock Loading- II
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Mar Azul (50/1st)
Session Chairs: Ryuichi Tomoshige; Session Monitor: TBA

11:20: [ManufacturingWedAM01] Invited
Explosion Systems with Inert High Modulus Components: Unexpected Phenomena and Opportunities
Igor Balagansky1 ; 1Novosibirsk State Technical University, Movosibirsk, Russian Federation;
Paper Id: 33 [Abstract]

11:45: [ManufacturingWedAM02]
On Ballistics of Damaging Fragmentation Elements
Aram Baghiyan1 ; 1Improvis LLC, Armenia, Yerevan, Armenia;
Paper Id: 85 [Abstract]

12:10: [ManufacturingWedAM03]
Study of Bonding Plates in a Fine-mesh Objects Manufactured by Selective Laser Melting of a Steel Powder
Anton Zhukov1 ; Boris Barakhtin1 ; Pavel Kuznetcov1 ; 1NRC "Kurchatov Institute" - CRISM "Prometey", Saint-Petersburg, Russian Federation;
Paper Id: 331 [Abstract]

12:35: [ManufacturingWedAM04]
Plasmon Spectroscopy of the Transition Metal Films Surface
Sergii Sidorenko1 ; M.a. Vasylyev2 ; S.m. Voloshko1 ; V.v. Yanchuk1 ; O.i. Kruglov1 ; 1Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine; 2G.V. Kurdyumov Institute for Metal Physics, Kyiv, Ukraine;
Paper Id: 177 [Abstract]

13:00 LUNCH

SESSION: ManufacturingWedPM1-R1
Non-Ferrous Advanced Materials from Macro- to Nanoscale - II
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Mar Azul (50/1st)
Session Chairs: Tahir Cagin; Session Monitor: TBA

14:00: [ManufacturingWedPM105]
Nanaocomposites Based on Graphene/Polymer for 3D Printers
Natia Jalagonia1 ; Nino Darakhvelidze2 ; Avtandil Sichinava2 ; Ekaterine Sanaia2 ; Marcello Casa3 ; Leila Kalatozishvili2 ; 1Ilia Vekua Sokhumi Institute of Physics and Technology, Tbilisi, Georgia; 2, Tbilisi, Georgia; 3, Salerno, Italy;
Paper Id: 342 [Abstract]

14:25: [ManufacturingWedPM106]
Numerical Investigation of a Nonsmooth Rotor-stator System Considering a Shape Memory Alloy Coated Stator
Alberto Paiva1 ; Rodrigo Veronese Moreira1 ; Alex Brandão2 ; 1, Volta Redonda, Brazil; 2UFF, Volta Redonda, Brazil;
Paper Id: 356 [Abstract]

14:50: [ManufacturingWedPM107]
The Influence of Aging Treatments on a Ti-Ni 50.7 at. % Mechanical Spring
Hugo De Souza Oliveira1 ; Henrique Alves Bandeira2 ; Aline Souza De Paula1 ; 1University of Brasilia, Brasilia, Brazil; 2University of Brasilia, Brasília, Brazil;
Paper Id: 363 [Abstract]

15:15: [ManufacturingWedPM108]
Modelling Shape Memory Effect in Hybrid Composite
Lucas Vignoli1 ; Marcelo Amorim Savi2 ; 1Federal University of Rio de Janeiro, São Gonçalo, Brazil; 2Federal University of Rio de Janeiro, RIO DE JANEIR0, Brazil;
Paper Id: 360 [Abstract]

15:40 Break

SESSION: ManufacturingWedPM2-R1
Non-Ferrous Advanced Materials from Macro- to Nanoscale - III
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Mar Azul (50/1st)
Session Chairs: Tatsuo Sawada; Session Monitor: TBA

15:55: [ManufacturingWedPM209]
Nanostructured Austempered Ductile Cast Iron (ADI)
Susil Putatunda1 ; Saranya Pannerselvam1 ; 1Wayne State University, Detroit, United States;
Paper Id: 315 [Abstract]

16:20: [ManufacturingWedPM210]
Damage Modeling of Shape Memory Alloys
Vanderson Marcio Dornelas1 ; Sergio Almeida Oliveira2 ; Marcelo Amorim Savi3 ; 1Federal University of Rio de Janeiro, RIO DE JANEIRO, Brazil; 2Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET/RJ), RIO DE JANEIRO, Brazil; 3Federal University of Rio de Janeiro, RIO DE JANEIR0, Brazil;
Paper Id: 361 [Abstract]

16:45: [ManufacturingWedPM211]
Chemical Transformation of Carbon Nanostructures and its Use in Nanocomposites
Guram Bokuchava1 ; Tinatin Kuchukhidze2 ; Tamari Archuadze3 ; Ekaterine Sanaia2 ; Natia Jalagonia4 ; 1Ilia Vekua Sukhumi Institute of Physics and Technology, Tbilisi, Georgia; 2, Tbilisi, Georgia; 3Ilia Vekua Institute of Physics and technology, Tbilisi, Georgia; 4Ilia Vekua Sokhumi Institute of Physics and Technology, Tbilisi, Georgia;
Paper Id: 341 [Abstract]

17:10: [ManufacturingWedPM212]
Maxwell-Boltzmann Energetics-enabled Design of Ball Milled Reactive Fractal Materials
Haris Doumanidis1 ; 1Nazarbayev University, Astana, Kazakhstan;
Paper Id: 53 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ElectrochemistryMonAM-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Mon Nov, 5 2018 / Room: Copacabana B (150/1st)
Session Chairs: Emmanuel Mousset; Session Monitor: TBA

11:20: [ElectrochemistryMonAM01] Plenary
A Combined SERS-DFT Study Towards Deep Understanding Electrocatalysis
Zhongqun Tian1 ; Yi-fan Huang2 ; Christian Amatore3 ; An Wang2 ; De-yin Wu2 ; Sandra Rondinini4 ; 1Department of Chemistry, Xiamen Uinversity, Xiamen, China; 2Xiamen University, Xiamen, China; 3CNRS & PSL, French Academy of Sciences, Paris, France; 4Universita degli Studi di Milano, Milan, Italy;
Paper Id: 277 [Abstract]

11:45: [ElectrochemistryMonAM02]
Selective Reduction of Carbon Dioxide in Water using Earth Abundant Metal and Nitrogen Doped Carbon Electrocatalysts
Kim Daasbjerg1 ; Xin-ming Hu1 ; Jun-jie Shi1 ; Steen U. Pedersen1 ; Troels Skrydstrup1 ; Halvor H. Hval1 ; 1Interdisciplinary Nanoscience Center, Aarhus University, Aarhus C, Denmark;
Paper Id: 256 [Abstract]

12:10: [ElectrochemistryMonAM03]
Electrochemical Activation of Carbon Dioxide for the Synthesis of Chemicals
Christian Amatore1 ; Alessandro Galia2 ; Onofrio Scialdone3 ; 1CNRS & PSL, French Academy of Sciences, Paris, France; 2Universita degli Studi di Palermo, Palermo, Italy; 3, Palermo, Italy;
Paper Id: 63 [Abstract]

12:35: [ElectrochemistryMonAM04] Invited
New Way of Free Hydroxyl Radical (•OH) Reaction Mode Evidenced by Advanced Electrochemical Process
Emmanuel Mousset1 ; 1Reactions and Chemical Engineering Laboratory (LRGP) / CNRS - University of Lorraine (UMR 7274), Nancy, France;
Paper Id: 187 [Abstract]

13:00 LUNCH

SESSION: ElectrochemistryMonPM1-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Mon Nov, 5 2018 / Room: Copacabana B (150/1st)
Session Chairs: Wei-Hua Huang; Session Monitor: TBA

14:00: [ElectrochemistryMonPM105] Plenary
Sustainability of Tissue in the Face of Injury and Disease: Electroanalytical Tools to Promote Life Sustainability
Martyn G Boutelle1 ; 1Imperial College London, London, United Kingdom;
Paper Id: 219 [Abstract]

14:25: [ElectrochemistryMonPM106] Invited
Stretchable Electrochemical Sensor for Real-Time Monitoring of Cell and Tissue Mechanotransduction
Wei-hua Huang1 ; 1Wuhan University, Wuhan, China;
Paper Id: 230 [Abstract]

14:50: [ElectrochemistryMonPM107]
Quantitative Analysis of Fusion Pore Dynamics During Vesicular Exocytosis in Neuroendocrine Cells
Alexander Oleinick1 ; Irina Svir2 ; Christian Amatore3 ; 1CNRS-ENS-SU UMR 8640 PASTEUR, CNRS, Paris, France; 2Ecole Normale Superieure, Department Chemistry, PARIS, France; 3CNRS & PSL, French Academy of Sciences, Paris, France;
Paper Id: 98 [Abstract]

15:15: [ElectrochemistryMonPM108]
Plasmon Enhanced Spectroscopic and Electrochemical Detection of Biomolecules
Xing-hua Xia1 ; 1Nanjing University, Nanjing, China;
Paper Id: 88 [Abstract]

15:40 Break

SESSION: ElectrochemistryMonPM2-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Mon Nov, 5 2018 / Room: Copacabana B (150/1st)
Session Chairs: Huangxian Ju; Session Monitor: TBA

15:55: [ElectrochemistryMonPM209] Invited
Photoelectrochemical Bioanalysis
Hong-yuan Chen1 ; Wei-wei Zhao1 ; Jing-juan Xu1 ; 1Nanjing University, Nanjing, China;
Paper Id: 69 [Abstract]

16:20: [ElectrochemistryMonPM210]
Electrochemical Catalytic Probes for Amplified Biosensing
Huangxian Ju1 ; 1Nanjing University, Nanjing, China;
Paper Id: 103 [Abstract]

16:45: [ElectrochemistryMonPM211]
Ultrasensitive Cell Recognition Based on Multifunctional Nanointerface
Xuemei Wang1 ; 1Southeast University, Nanjing, China;
Paper Id: 207 [Abstract]

17:10: [ElectrochemistryMonPM212] Invited
Some Electrochemical Behavior of Self-assembled DNA-metal Nanoparticle Lattice Films
Lauro Tatsuo Kubota1 ; Sergio Kogikoski Junior2 ; 1Instituto de Quimica - University of Campinas, Campinas, Brazil; 2Institute of Chemistry - Unicamp, Campinas, Brazil;
Paper Id: 267 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ElectrochemistryTueAM-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Tue Nov, 6 2018 / Room: Copacabana B (150/1st)
Session Chairs: Tsuyoshi Hoshino; Session Monitor: TBA

11:20: [ElectrochemistryTueAM01] Invited
Electrochemistry for Sustainable Solar Photovoltaics
Meng Tao1 ; 1Arizona State University, Tempe, United States;
Paper Id: 171 [Abstract]

11:45: [ElectrochemistryTueAM02]
Nanoscale Electrochemical Imaging for Functional Energy Materials
Akichika Kumatani1 ; Yasufumi Takahashi2 ; Tomokazu Matsue3 ; 1Tohoku University, Sendai, Japan; 2Kanazawa University, Kanazawa, Japan; 3Tohoku University, , Japan;
Paper Id: 405 [Abstract]

12:10: [ElectrochemistryTueAM03]
Vitamin Based Redox Active Organic Molecules for Energy Storage
Sherman Lauw1 ; Raymond Shi1 ; Bao Yun Foo1 ; Richard Webster1 ; 1Nanyang Technological University, Singapore, Singapore;
Paper Id: 220 [Abstract]

12:35: [ElectrochemistryTueAM04] Invited
Lithium Recycling from Used Li-ion Batteries using Innovative Electrodialysis with Lithium Ionic conductor
Tsuyoshi Hoshino1 ; 1Breeding Functional Materials Development Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Fusion Energy Research and Development Directorate, National Institutes for Quantum, Rokkasho-mura, Kamikita-gun, Japan;
Paper Id: 100 [Abstract]

13:00 LUNCH

SESSION: ElectrochemistryTuePM1-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Tue Nov, 6 2018 / Room: Copacabana B (150/1st)
Session Chairs: Guobao Xu; Session Monitor: TBA

14:00: [ElectrochemistryTuePM105]
ECl Color Devices Based on Bipolar Electrode
Jing-juan Xu1 ; Hong-yuan Chen1 ; 1Nanjing University, Nanjing, China;
Paper Id: 73 [Abstract]

14:25: [ElectrochemistryTuePM106]
New Materials for Electrochemiluminescent Analysis
Guobao Xu1 ; 1State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, China;
Paper Id: 252 [Abstract]

14:50: [ElectrochemistryTuePM107]
Nanospectroscopy for Electrochemistry-Electrochemical Tip-enhanced Raman Spectroscopy
Bin Ren1 ; 1Xiamen University, Xiamen, China;
Paper Id: 152 [Abstract]

15:15: [ElectrochemistryTuePM108]
Highly Sensitive Electrochemical Bioanalysis of Unicellular Samples based on Au@Pt Nanaostructures Modified Diamond Microelectrode Arrays
Xuemei Wang1 ; Hui Jiang1 ; Pasquarelli Alberto2 ; Chunmei Li1 ; Hang Zhang1 ; Jun Ruan1 ; 1Southeast University, Nanjing, China; 2Ulm University, Ulm, Germany;
Paper Id: 229 [Abstract]

15:40 Break

SESSION: ElectrochemistryTuePM2-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Tue Nov, 6 2018 / Room: Copacabana B (150/1st)
Session Chairs: Lauro Tatsuo Kubota; Session Monitor: TBA

15:55: [ElectrochemistryTuePM209] Invited
Oxidative Stress: Can We Reduce Oxidative Stress in Various Diseases?
Haruhiko Inufasa1 ; 1Gifu University, Osaka, Japan;
Paper Id: 399 [Abstract]

16:20: [ElectrochemistryTuePM210]
Simultaneous Electrochemical Detection of Primary Reactive Oxygen and Nitrogen Species Released by Cell Populations in Integrated Microdevices
Yun Li1 ; Catherine Sella1 ; Frederic Lemaitre1 ; Manon Guille Collignon1 ; Christian Amatore2 ; Laurent Thouin1 ; 1Ecole normale superieure - CNRS, Paris, France; 2CNRS & PSL, French Academy of Sciences, Paris, France;
Paper Id: 383 [Abstract]

16:45: [ElectrochemistryTuePM211]
The Development of Dendrimer-gold Nanocomposite Electrochemical Sensor for the Detection of Lead (II) ion in Water
Kgaogelo Jalda1 ; Nonhlangabezo Mabuba2 ; Omotayo Arotiba2 ; 1, Polokwane, South Africa; 2University of Johannesburg, Johannesburg, South Africa;
Paper Id: 355 [Abstract]

17:10: [ElectrochemistryTuePM212] Invited
Innovative Electrochemical Processes and Reactors for the Treatment of Wastewater
Onofrio Scialdone1 ; Christian Amatore2 ; 1, Palermo, Italy; 2CNRS & PSL, French Academy of Sciences, Paris, France;
Paper Id: 62 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ElectrochemistryWedAM-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Wed Nov, 7 2018 / Room: Copacabana B (150/1st)
Session Chairs: Meng Tao; Session Monitor: TBA

11:20: [ElectrochemistryWedAM01]
Cyclic Voltammetry on Nanoelectrode and Nanostructured Electrode
Dongping Zhan1 ; Zhongqun Tian2 ; 1Department of Chemistry, Xiamen University, Xiamen, China; 2Department of Chemistry, Xiamen Uinversity, Xiamen, China;
Paper Id: 160 [Abstract]

11:45: [ElectrochemistryWedAM02]
Performance of Lyotropic Liquid Crystal-based Photoelectrochemical Capacitors for Solar-to-Electrical Energy Conversion
Jay Deep Wadhawan1 ; 1The University of Hull, Kingston-upon-Hull, United Kingdom;
Paper Id: 410 [Abstract]

12:10: [ElectrochemistryWedAM03] Invited
Actual Problems of the Electrochemistry of Metal Complexes - Fundamentals and Applications: Part 1
Arvydas Survila1 ; 1Center for Physical Sciences and Technology, Vilnius, Lithuania;
Paper Id: 195 [Abstract]

12:35: [ElectrochemistryWedAM04] Invited
Actual Problems of the Electrochemistry of Metal Complexes - Fundamentals and Applications: Part 2
Arvydas Survila1 ; 1Center for Physical Sciences and Technology, Vilnius, Lithuania;
Paper Id: 196 [Abstract]

13:00 LUNCH

SESSION: ElectrochemistryWedPM1-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Wed Nov, 7 2018 / Room: Copacabana B (150/1st)
Session Chairs: Dongping Zhan; Session Monitor: TBA

14:00: [ElectrochemistryWedPM105]
Electrochemical Behavior of Boron-doped Synthetic Diamond Compacts - A New Electrode Material
Yuri Pleskov1 ; Marina Krotova2 ; Eugeniy Ekimov3 ; 1Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, Moscow, Russian Federation; 21FRUMKIN INSTITUTE OF PHYSICAL CHEMISTRY AND ELECTROCHEMISTRY, Moscow, Russian Federation; 3INSTITUTE FOR HIGH PRESSURE PHYSICS, Moscow, Russian Federation;
Paper Id: 81 [Abstract]

14:25: [ElectrochemistryWedPM106]
3D Printing Electrodes for Electrochemical Energy Storage and Conversion
Marcus Worsley1 ; 1Lawrence Livermore National Laboratory, Livermore, United States;
Paper Id: 316 [Abstract]

14:50: [ElectrochemistryWedPM107]
Influence of the Cobalt and Iron Doping on the Platinum-free Carbon-based Electrocatalysts for Oxygen Reduction Reaction Properties
Tatiana Lastovina1 ; Yulia Pimonova1 ; Andriy Budnyk1 ; 1Southern Federal University, Rostov-on-Don, Russian Federation;
Paper Id: 265 [Abstract]

15:15: [ElectrochemistryWedPM108]
Electrochemical Impedance Analysis of Oxygen Reduction Reaction Kinetics in HTPEMFCs
Panagiotis Giotakos1 ; Stylianos G. Neophytides2 ; 1FORTH ICE-HT,University of Patras Chemical Engineering Dpt, Patras, Greece; 2FORTH ICE-HT, PATRAS, Greece;
Paper Id: 396 [Abstract]

15:40 Break

SESSION: ElectrochemistryWedPM2-R2
Amatore International Symposium on Electrochemistry for Sustainable Development
Wed Nov, 7 2018 / Room: Copacabana B (150/1st)
Session Chairs: Yuri Pleskov; Session Monitor: TBA

15:55: [ElectrochemistryWedPM209] Invited
Electroless Metal Deposition Using Multivalent Metal Ions as Reducing Agents
Eugenijus Norkus1 ; 1Center of Physical Sciences and Technology, Vilnius, Lithuania;
Paper Id: 136 [Abstract]

16:20: [ElectrochemistryWedPM210]
Highly Regio and Enantioselective Synthesis of Functionalized Dihydropyridines and One-Pot Synthesis of Pyridines Triggered by Heck Coupling of Monocyclopropanated Heterocycles
Julietta Yedoyan1 ; 1University of Regensburg, Regensburg, Germany;
Paper Id: 350 [Abstract]

16:45: [ElectrochemistryWedPM211]
Membrane Electrolysis as a New Method for Lithium Recovery From Brines
Victoria Flexer1 ; Noelia Palacios1 ; Cesar Diaz Nieto2 ; Korneel Rabaey3 ; 1Centro de Investigación y Desarrollo en Materiales Avanzados y Almacenamiento de Energía de Jujuy-CIDMEJu, Palpalá, Argentina; 2Centro de Investigacion y Desarrollo en Materiales Avanzados y Almacenamiento de Energia de Jujuy-CIDMEJu, Palpalá, Argentina; 3CMET, Ghent University, Gent, Belgium;
Paper Id: 250 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: MoltenMonAM-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Mon Nov, 5 2018 / Room: Bossa (150/3rd)
Session Chairs: Anders Riisager; Session Monitor: TBA

11:20: [MoltenMonAM01]
My Life in Molten Ionic Media
Rasmus Fehrmann1 ; 1DTU Chemistry, Lyngby, Denmark;
Paper Id: 56 [Abstract]

11:45: [MoltenMonAM02] Plenary
SILP at SIPS: Combining Pharmaceuticals with Ionic Liquids on Silica-Supports
Robin Rogers1 ; 1University of Alabama, Tuscaloosa, United States;
Paper Id: 58 [Abstract]

12:10: [MoltenMonAM03] Keynote
Spectroscopy and Catalysis: The Operando Methodology and Reaction Monitoring, Tools to Understand Structure-Activity Relationships
Miguel Banares1 ; Raquel Portela1 ; Mariví Martinez Huerta1 ; Pedro Avila1 ; Susana Pérez Ferreras1 ; Søren Birk Rasmussen1 ; Vanesa Calvino Casilda2 ; Alba E. Diaz Alvarez1 ; Ines Reyero1 ; Katarzyna Stawicka3 ; Maciej Trejda3 ; Maria Ziolek3 ; Olga Guerrero4 ; Marco Daturi5 ; Philippe Bazin5 ; Guillaume Clet5 ; Zhenyou Gui6 ; Nanette Zahrtmann7 ; Shunmugavel Saravana8 ; Zhiwen Qi9 ; Anders Riisager7 ; Eduardo J. García Suárez10 ; 1Institute for Catalysis and Petroleum Chemistry (CSIC), Madrid, Spain; 2ETS de Ingenieros Industriales, UNED, Madrid, Spain; 3Adam Mickiewicz University, Poznan, Poland; 4University of Malaga, Malaga, Spain; 5LCS University of Caen Normandy, Caen, France; 6Technical University of Denmark, Lyngby, Denmark; 7DTU Chemistry, Kgs. Lyngby, Denmark; 8DTU Chemistry, Lyngby, Denmark; 9East China University of Science and Technology, Shanghai, China; 10Technical Univ of Denmark, Kgs. Lyngby, Denmark;
Paper Id: 403 [Abstract]

12:35: [MoltenMonAM04]
Use of Ionic Liquids for the Extraction of Actinides and Lanthanides: Synergistic Effects and Task-specific Extractants
Clotilde Gaillard1 ; Maria Boltoeva2 ; 1CNRS, Villeurbanne, France; 2CNRS-IPHC, Strasbourg, France;
Paper Id: 222 [Abstract]

13:00 LUNCH

SESSION: MoltenMonPM1-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Mon Nov, 5 2018 / Room: Bossa (150/3rd)
Session Chairs: Peter Wasserscheid; Session Monitor: TBA

14:00: [MoltenMonPM105] Keynote
Anomalous Behaviour of Ionic Liquids in Electric Fields
Mohd Azizi Nawawi1 ; Ryan Clark1 ; Aleksandar Ivanov1 ; Qingshan Liu1 ; Joshua Edel1 ; Marina Kuimova1 ; Alastair Mcintosh1 ; Tom Welton2 ; 1Imperial College, London, United Kingdom; 2Imperial College London, London, United Kingdom;
Paper Id: 390 [Abstract]

14:25: [MoltenMonPM106] Invited
Understanding the Different Partial Charge Representations of Ionic Liquids
Patricia Hunt1 ; 1Imperial College London, London, United Kingdom;
Paper Id: 305 [Abstract]

14:50: [MoltenMonPM107]
Switchable Aqueous Pentaethylenehexamine for CO<sub>2</sub> Capture
Santosh Khokarale1 ; Jyri-pekka Mikkola2 ; 1Chemistry Department, Umeå University, Umeå, Sweden; 2Abo Akademi University, Turku, Finland;
Paper Id: 180 [Abstract]

15:15: [MoltenMonPM108]
Ionic Liquids for Controlled Synthesis of Functional Materials for Energy-related Applications
Sheng Dai1 ; 1University of Tennessee, Knoxville, United States;
Paper Id: 287 [Abstract]

15:40 Break

SESSION: MoltenMonPM2-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Mon Nov, 5 2018 / Room: Bossa (150/3rd)
Session Chairs: Tom Welton; Session Monitor: TBA

15:55: [MoltenMonPM209] Keynote
Bulk Liquid Phase Processes Using Ionic Liquids — Success Factors and Recent Examples
Peter Wasserscheid1 ; Jakob Albert2 ; 1Friedrich-Alexander-Universitat, Erlangen, Germany; 2Institute for Chemical Reaction Engineering, Erlangen, Germany;
Paper Id: 289 [Abstract]

16:20: [MoltenMonPM210] Invited
Are Ionic Liquids Revolutionizing Analytical Chemistry?
Mihkel Koel1 ; 1Tallinn University of Technology, Tallinn, Estonia;
Paper Id: 31 [Abstract]

16:45: [MoltenMonPM211] Invited
Removal of NO from Gas Streams Using Nitrate-based Ionic Liquids
Susanne Mossin1 ; Rasmus Fehrmann1 ; Peter L. Thomassen1 ; 1DTU Chemistry, Lyngby, Denmark;
Paper Id: 130 [Abstract]

17:10: [MoltenMonPM212]
Polymer Ionic Liquids Layers for Textile Chemiresistors
Eva Maresova1 ; David Tomecek1 ; Premysl Fitl1 ; Jan Vlcek1 ; Sarka Havlova1 ; Martin Vrnata1 ; 1University of Chemistry and Technology Prague, Prague, Czech Republic;
Paper Id: 259 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: MoltenTueAM-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Tue Nov, 6 2018 / Room: Bossa (150/3rd)
Session Chairs: Robin Rogers; Session Monitor: TBA

11:20: [MoltenTueAM01]
Application of Ionic Liquids in Oxidative and Acidic Catalysis
Nina Kuznetsova1 ; Nikolay Adonin1 ; Bair Bal'zhinimaev1 ; 1Boreskov Institute of Catalysis, Novosibirsk, Russian Federation;
Paper Id: 165 [Abstract]

11:45: [MoltenTueAM02]
Screening of [DCN] and [TF<sub>2</sub>N]-based Promising Ionic Liquids for Carbon Dioxide Capture: Solubility and Thermodynamic Modeling
Amr Henni1 ; Mohamed Zoubeik1 ; 1University of Regina, Regina, Canada;
Paper Id: 364 [Abstract]

12:10: [MoltenTueAM03]
Ionic Liquid Promoted Synthesis of Aryl Ureas in Pd-catalyzed Oxidative Carbonylation
Anders Riisager1 ; Nanette Zahrtmann1 ; Cyril Godard2 ; Carmen Claver2 ; Eduardo J. García Suárez3 ; 1DTU Chemistry, Kgs. Lyngby, Denmark; 2Universitat Rovira i Virgili, Tarragona, Spain; 3Technical Univ of Denmark, Kgs. Lyngby, Denmark;
Paper Id: 245 [Abstract]

12:35: [MoltenTueAM04]
Topological Forecast of 4D T-x-y-z Diagram Li,Na,Rb,La||F
Vasily Lutsyk1 ; Anna Zelenaya1 ; Maria Parfenova2 ; 1Institute of Physical Materials Science SB RAS, Ulan-Ude, Russian Federation; 2Tomsk State University of Control Systems and Radio-electronics, Tomsk, Russian Federation;
Paper Id: 120 [Abstract]

13:00 LUNCH

SESSION: MoltenTuePM1-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Tue Nov, 6 2018 / Room: Bossa (150/3rd)
Session Chairs: Anja-Verena Mudring; Session Monitor: TBA

14:00: [MoltenTuePM105]
Upgrading of Biogas Using Supported Ionic Liquid Phase (SILP) Materials
Leonard Schill1 ; Rasmus Fehrmann1 ; Anders Riisager2 ; 1DTU Chemistry, Lyngby, Denmark; 2DTU Chemistry, Kgs. Lyngby, Denmark;
Paper Id: 72 [Abstract]

14:25: [MoltenTuePM106]
Synthesis and Catalysis with Ionic Liquids - From Batch to Flow
Katharina Schröder (bica)1 ; 1Institute of Applied Synthetic Chemistry, Vienna, Austria;
Paper Id: 352 [Abstract]

14:50: [MoltenTuePM107]
Carbon Capture in Molten Salts - Calcium Looping in the Molten State
Espen Olsen1 ; Nils Rusås Ruud2 ; Heidi S. Nygård2 ; 1Norwegian University of Life Sciences, Ås, Norway; 2NMBU, Aas, Norway;
Paper Id: 325 [Abstract]

15:15: [MoltenTuePM108]
A Computational Model for Dimulating Rare Earth Reduction on Electrowinning Cells
Jose Adilson De Castro1 ; Marcos De Campos1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 319 [Abstract]

15:40 Break

SESSION: MoltenTuePM2-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Tue Nov, 6 2018 / Room: Bossa (150/3rd)
Session Chairs: Sheng Dai; Session Monitor: TBA

15:55: [MoltenTuePM209] Keynote
Ionic Liquids and their Role in Creating Efficient Emitter Materials for Light Emitting Electrochemical Cells
Anja-verena Mudring1 ; 1Stockholm University, Stockholm, Sweden;
Paper Id: 398 [Abstract]

16:20: [MoltenTuePM210] Invited
X-ray Photoelectron Spectroscopy of Ionic Liquids – From Half-cell Measurements to In-situ Electrochemical XPS
Annette Foelske Schmitz1 ; 1TU Wien, 1060 Vienna, Austria;
Paper Id: 6 [Abstract]

16:45: [MoltenTuePM211]
Multi-stabilized Pd-SILCA with Nitrogen-rich Ionic Liquids as a Recyclable Catalyst for Heck Reaction
Nemanja Vucetic1 ; Jyri-pekka Mikkola2 ; 1Åbo Akademi University, Johan Gadolin Process Chemistry Centre, Laboratory of Industrial Chemistry and Reaction Engineering, Turku, Finland; 2Abo Akademi University, Turku, Finland;
Paper Id: 232 [Abstract]

17:10: [MoltenTuePM212] Invited
Materials for the Nuclear Reactors of Generation IV: Polyhedration of the Chloride-Fluoride Reciprocal Systems
Vasily Lutsyk1 ; Vera Vorob'eva1 ; Maria Parfenova2 ; Marina Lamueva3 ; 1Institute of Physical Materials Science SB RAS, Ulan-Ude, Russian Federation; 2Tomsk State University of Control Systems and Radio-electronics, Tomsk, Russian Federation; 3Institute of Physical Materials Science, Ulan-Ude, Russian Federation;
Paper Id: 96 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: MoltenWedAM-R3
Fehrmann International Symposium on Sustainable Molten Salt and Ionic Liquid Processing (6th Intl. Symp. on Sustainable Molten Salt and Ionic Liquid Processing)
Wed Nov, 7 2018 / Room: Bossa (150/3rd)
Session Chairs: Rasmus Fehrmann; Session Monitor: TBA

11:20: [MoltenWedAM01] Invited
Homogeneous Catalysis for Sustainable Chemistry
Martin Nielsen1 ; 1Technical University of Denmark, Kgs. Lyngby, Denmark;
Paper Id: 137 [Abstract]

11:45: [MoltenWedAM02]
How to Predict Physico-chemical Properties from MD Simulations
Christian Schröder1 ; 1University of Vienna, Vienna, Austria;
Paper Id: 304 [Abstract]

SESSION: ManufacturingWedPM1-R3
Specific Applications to Bioengineering / Energy / Materials
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Bossa (150/3rd)
Session Chairs: Sesh Commuri; Session Monitor: TBA

14:00: [ManufacturingWedPM105]
A Novel Approach to Methods and Tools of Optical Spectroscopy of Viruses
Paata Kervalishvili1 ; 1Georgian Technical University, Tbilisi, Georgia;
Paper Id: 93 [Abstract]

14:25: [ManufacturingWedPM106]
Identification of a Peptide that can Enhance Genotoxic Sensitivity Through Cellular Redistribution of Chk1 Protein
Kwang Seok Kim1 ; Sang Jun Park1 ; Chun-ho Kim1 ; 1KIRAMS, Seoul, South Korea;
Paper Id: 414 [Abstract]

14:50: [ManufacturingWedPM107]
Nano Thermometry: Origin, Evolution, and Emergence
Pragati Kumar1 ; Nupur Saxena1 ; Tania Kalsi1 ; 1Central University of Jammu, Jammu, jammu, India;
Paper Id: 247 [Abstract]

15:15: [ManufacturingWedPM108]
Synthesis of Fe-Al Alloys by a Novel Reactive Infiltration Method
Srdjan Milenkovic1 ; 1IMDEA Materials Institute, Getafe, Spain;
Paper Id: 244 [Abstract]

15:40 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ManufacturingMonAM-R4
Advanced Manufacturing and Industrial Sustainability
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Mon Nov, 5 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Dimitris C. Lagoudas; Session Monitor: TBA

11:20: [ManufacturingMonAM01] Plenary
Advanced Manufacturing of Advanced Materials from Macro- to Nanoscale: Static to Shock Loading
Athanasios G. Mamalis1 ; 1PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 423 [Abstract]

11:45: [ManufacturingMonAM02] Keynote
The Ethics of Sustainability
Jeremy Ramsden1 ; Athanasios G. Mamalis2 ; Nikolaos T. Athanassoulis3 ; 1Henge Holdings Ltd, Birkenhead, United Kingdom; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 3Laboratory of Industrial and Energy Economics, NTUA, Athens, Greece;
Paper Id: 95 [Abstract]

12:10: [ManufacturingMonAM03] Keynote
Nanotechnology and Sustainability
Jeremy Ramsden1 ; Alexandra Mamali2 ; 1Henge Holdings Ltd, Birkenhead, United Kingdom; 2Maersk Broker Hellas, Athens, Greece;
Paper Id: 94 [Abstract]

12:35: [ManufacturingMonAM04] Keynote
Simulation of the Seismic Performance of Ceiling-Piping-Partition Nonstructural Systems
Manos Maragakis1 ; 1University of Nevada, Reno, Reno, United States;
Paper Id: 280 [Abstract]

13:00 LUNCH

SESSION: ManufacturingMonPM1-R4
Advanced Manufacturing / Mechanics / Structural Plasticity
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Mon Nov, 5 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Pengwan Chen; Session Monitor: TBA

14:00: [ManufacturingMonPM105]
Dynamic Pressure Change of a Liquid Sloshing in a Rotating, Laterally Oscillating, Cylindrical Container
Tatsuo Sawada1 ; Eisaku Yokose1 ; Yusuke Saito1 ; 1Keio University, Yokohama, Japan;
Paper Id: 111 [Abstract]

14:25: [ManufacturingMonPM106]
Dynamic Compressive Behavior of An E-Glass/Polyester Composite Material Subjected to Repeated Loads
Alper Tasdemirci1 ; Mesut Bayhan1 ; Semih Berk Seven1 ; Ayda Ramyar1 ; Mustafa Guden1 ; 1İzmir Institute of Technology, İzmir, Turkey;
Paper Id: 124 [Abstract]

14:50: [ManufacturingMonPM107]
The Investigation of Low-velocity Drop Weight Impact on Concrete Plates
Alper Tasdemirci1 ; Semih Berk Seven1 ; Mehmet Alper Cankaya2 ; Cetin Uysal3 ; Selcuk Saatci3 ; Mustafa Guden1 ; 1İzmir Institute of Technology, İzmir, Turkey; 2Izmir Katip Celebi University, Izmir, Turkey; 3Izmir Institute of Technology, Izmir, Turkey;
Paper Id: 123 [Abstract]

15:15: [ManufacturingMonPM108]
Hydrogen Segregation in Palladium: Influence of Hydrogen Content, Temperature and Defects
Tahir Cagin1 ; Han Leng2 ; Hieu H. Pham2 ; 1Texas A&M University, College Station, United States; 2Texas A&M University, College Station, United States;
Paper Id: 216 [Abstract]

15:40 Break

SESSION: ManufacturingMonPM2-R4
Precision / Ultraprecision Manufacturing
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Mon Nov, 5 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Andras Szalay; Session Monitor: TBA

15:55: [ManufacturingMonPM209] Keynote
Faultless Steel Production and Manufacturing
Xenia Vourna1 ; Evangelos Hristoforou1 ; Athanasios G. Mamalis2 ; 1National TU of Athens, Athens, Greece; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 294 [Abstract]

16:20: [ManufacturingMonPM210]
Concurrent Method for Design of Sustainable Multi-stage Manufacturing Processes
Sesh Commuri1 ; Jelena Milisavljevic2 ; Farrokh Mistree2 ; Janet Allen2 ; 1University of Nevada, Reno, Reno, United States; 2University of Oklahoma, Norman, United States;
Paper Id: 261 [Abstract]

16:45: [ManufacturingMonPM211]
A Simple Magnetic Susceptibility Measuring Technique
Giorgios Banis1 ; Panayiota Tselou1 ; Angelo Ferraro1 ; Evangelos Hristoforou1 ; Athanasios G. Mamalis2 ; 1National TU of Athens, Athens, Greece; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 295 [Abstract]

17:10: [ManufacturingMonPM212]
Parameters Optimization of Rotary Forming Process of Nickel Superalloy Metal Plates
Sandra Puchlerska1 ; Krzysztof Zaba1 ;0 ; Jaroslaw Pyzik2 ; 1Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, Cracow, Poland; 2AGH University of Science and Technology, Krakow, Poland;
Paper Id: 268 [Abstract]

17:35 Break

SESSION: ManufacturingMonPM3-R4
Metal Forming / Metal Removal Processing / Non-Conventional Techniques – I
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Mon Nov, 5 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Raul S. Turmanidze; Session Monitor: TBA

17:40: [ManufacturingMonPM313]
Synthesis of ZnSe Films by Electrochemical Deposition for Assembly of Photo-transforming Heterostructures
Dmitri S. Sofronov1 ; Athanasios G. Mamalis2 ; Vadym V. Starikov3 ; E.m. Sofronova1 ; E.a. Vaksler1 ; P.v. Mateychenko1 ; Sergiy N. Lavrynenko4 ; 1SSI "Institute for Single Crystals" of NAS of Ukraine, Kharkiv, Ukraine; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 3National Technical University - Kharkov Polytechnic Institute, Kharkiv, Ukraine; 4Kharkov Polytechnic Institute, Kharkov, Ukraine;
Paper Id: 170 [Abstract]

18:05: [ManufacturingMonPM314]
Efficiency of Hard Machining Processes
János Kundrák1 ; Athanasios G. Mamalis2 ; Viktor Molnar1 ; 1University of Miskolc, Miskolc, Hungary; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 158 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ManufacturingTueAM-R4
Non-Ferrous Advanced Materials from Macro- to Nanoscale – I
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Tue Nov, 6 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Mustafa Guden; Session Monitor: TBA

11:20: [ManufacturingTueAM01]
Development, Modeling and Characterization of Shape Memory Alloys and their Utilization in Morphing Structures
Dimitris C. Lagoudas1 ; 1Texas A&M University, College Station, United States;
Paper Id: 145 [Abstract]

11:45: [ManufacturingTueAM02]
Calorimetric Mechanosensors Consisting of Various Mechanisms: Triboluminescence, Structural Color, and Disassembly of Au Nanoparticles
Mustafa Demir1 ; Gökhan Topçu2 ; Ezgi Inci2 ; Athanasios G. Mamalis3 ; 1Izmir Institute of Technology, Urla, Turkey; 2Izmir Institute of Technology, İzmir, Turkey; 3PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 57 [Abstract]

12:10: [ManufacturingTueAM03]
Structure and Optical Properties of Nanocomposite Carbon Films Obtained from Accelerated C60 Ion Flows
Svetlana Rudchenko1 ; Vladimir Egorovich Pukha1 ; Vadym V. Starikov1 ; Athanasios G. Mamalis2 ; Sergiy N. Lavrynenko3 ; 1National Technical University - Kharkov Polytechnic Institute, Kharkiv, Ukraine; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 3Kharkov Polytechnic Institute, Kharkov, Ukraine;
Paper Id: 151 [Abstract]

12:35: [ManufacturingTueAM04]
Properties of the Composite SnO2-Ag (Semiconductor Metal) Ceramic Material
Vladimir Kirko1 ; Sergey Dobrosmislov2 ; Genadii Nagibin2 ; 1Research Institute of Physics and Engineering, Krasnoyarsk, Russian Federation; 2associate professor, Krasnoyarsk, Russian Federation;
Paper Id: 66 [Abstract]

13:00 LUNCH

SESSION: ManufacturingTuePM1-R4
Biomechanics / Biomedical engineering
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Tue Nov, 6 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Jeremy Ramsden; Session Monitor: TBA

14:00: [ManufacturingTuePM105] Keynote
Glasses for Seeing Beyond the Visible
Jacques Lucas1 ; 1University of Rennes, Rennes, France;
Paper Id: 201 [Abstract]

14:25: [ManufacturingTuePM106]
Au@Pt Core-Shell Nanoparticles with Nanostructured Dendritic Pt Shells as Solid Contacts in Ion Selective Electrodes
Masoumeh Saber Zaeimian1 ; Athanasios G. Mamalis2 ; Xiaoshan Zhu1 ; 1University of Nevada, Reno, Reno, United States; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 205 [Abstract]

14:50: [ManufacturingTuePM107]
Spherical Depth-sensing Indentation in a Liquid Environment: Toward Cardiac Tissue Characterization
Jean-philippe Jehl1 ; Richard Kouitat Njiwa2 ; Pablo Maureira3 ; 1Institut Jean Lamour, Nancy, France; 2Institut Jean Lamour (UMR 7198 CNRS-Uninersite de lorraine), Nancy, France; 3INSERM U961, Nancy, France;
Paper Id: 185 [Abstract]

15:15: [ManufacturingTuePM108]
Perspective Ways for the Development of Endoprosthesis of Human Hip Implants
Sergiy Sheykin1 ; Athanasios G. Mamalis2 ; Raul S. Turmanidze3 ; S. Sohan4 ; I. Rostotskiy4 ; Dmitrii Vladimirovich Efrosinin5 ; 1Otdel_20, Kyiv, Ukraine; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 3Georgian Technical University, Tbilisi, Georgia; 4Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kiev, Ukraine; 5Bakul Institute for Superhard Materials of the NASU, Kiev, Ukraine;
Paper Id: 174 [Abstract]

15:40 Break

SESSION: ManufacturingTuePM2-R4
High Strain-Rate Phenomena / Treatment under Shock Loading–I
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Tue Nov, 6 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Manos Maragakis; Session Monitor: TBA

15:55: [ManufacturingTuePM209] Invited
The Making of UniPore Material Through Explosive Welding Process and the Mechanical Response Under Static and Dynamic Loading
Kazuyuki Hokamoto1 ; 1Institute Pulsed Power Science, Kumamoto, Japan;
Paper Id: 7 [Abstract]

16:20: [ManufacturingTuePM210]
Preparation of Graphene Nanosheets by Shock Waves
Pengwan Chen1 ; Xin Gao1 ; Hao Yin2 ; Chunxiao Xu1 ; Qiang Zhou1 ; 1Beijing Institute of Technology, Beijing, China; 2Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang, China;
Paper Id: 159 [Abstract]

16:45: [ManufacturingTuePM211] Invited
Relationship Between Hardness and Capillary Action-like Phenomena of Nickel Metal Observed in TiB2+TiN/TiNi/Steel-layered Composites Fabricated by Hot Explosive Welding
Ryuichi Tomoshige1 ; Seiichiro Ii2 ; Yasuhiro Morizono3 ; Kanako Sonoda1 ; 1Sojo University, Kumamoto, Japan; 2National Institute for Materials Science (NIMS), Tsukuba, Japan; 3National Institute of Technology, Kurume College, Kurume, Japan;
Paper Id: 68 [Abstract]

17:10: [ManufacturingTuePM212]
Explosive Forming of Metal Tubes for Heat Exchangers
Andras Szalay1 ; Athanasios G. Mamalis2 ; Istvan Zador1 ; Pal Racz3 ; Hasebe Toshiaki1 ; 1S-Metalltech 98 Materials Research and Development Ltd, Budapest, Hungary; 2PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 3Bay Zoltán Nonprofit Ltd, Budapest, Hungary;
Paper Id: 86 [Abstract]

17:35 Break

SESSION: ManufacturingTuePM3-R4
Defense / Safety
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Tue Nov, 6 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Kazuyuki Hokamoto; Session Monitor: TBA

17:40: [ManufacturingTuePM313]
Modern Protective Systems for Mitigating Explosions
Nikoloz Chikhradze1 ; Edgar Mataradze2 ; Theodore Krauthammer3 ; Mikheil Chikhradze4 ; 1G. Tsulukidze Mining Institute, Tbilisi, Georgia; 2LEPL Grigol Tsulukidze Mining Institute, Tbilisi, Georgia; 3Director, Center for Infrastructure Protection and Physical Security University of Florida, Geinesville, United States; 4Georgian Technical University, Tbilisi, Georgia;
Paper Id: 144 [Abstract]

18:05: [ManufacturingTuePM314]
Static and Dynamic Compression and Indentation Behavior of Aerated Autoclaved Concrete
Mustafa Sarikaya1 ; Dogus Zeren1 ; Burak Akyol1 ; Taner Kavas2 ; Ugur Uzgan3 ; Dogan Soyal4 ; Mustafa Guden1 ; 1İzmir Institute of Technology, İzmir, Turkey; 2Ayfon Kocatepe University, Ayfonkarahisar, Turkey; 3AKG Gazbeton, Izmir, Turkey; 4AKG Gazbeton, İzmir, Turkey;
Paper Id: 113 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: ManufacturingWedAM-R4
Transport / Crashworthiness of Vehicles: Passive and Active Safety
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Clive Chirwa; Session Monitor: TBA

11:20: [ManufacturingWedAM01] Keynote
Assessment of System Failure in Compatibility of Autonomous Vehicles With Vulnerable Road Users Vindicating Passive Safety Technology
Clive Chirwa1 ; 1PPA Group, Deeside, United Kingdom;
Paper Id: 149 [Abstract]

11:45: [ManufacturingWedAM02] Keynote
A Composite Nanostructured Material Based on Alumina for Use in an Airocraft Gas Turbine Engine
Athanasios G. Mamalis1 ; Sergiy N. Lavrynenko2 ; Edwin Gevorkyan3 ; Vasily Dutka4 ; Maxim Kislitsa5 ; 1PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 2Kharkov Polytechnic Institute, Kharkov, Ukraine; 3Cermet-Ukraine Ltd. Science and Production Company, Kharkiv, Ukraine; 4Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kiev, Ukraine; 5Ukrainian State University of Railway Transport, Kharkiv, Ukraine;
Paper Id: 218 [Abstract]

12:10: [ManufacturingWedAM03]
Challenges in Engineering Devices that Promote Natural Gait in Amputees
Sesh Commuri1 ; Bhanu Prasad Kotamraju2 ; 1University of Nevada, Reno, Reno, United States; 2University of Oklahoma, Norman, United States;
Paper Id: 266 [Abstract]

12:35: [ManufacturingWedAM04]
Magnetic Permeability Measurement Device Based on Hall Effect
Spyridon Angelopoulos1 ; Giorgios Banis1 ; Xenia Vourna1 ; Aphrodite Ktena2 ; Panagiotis Tsarabaris1 ; Evangelos Hristoforou1 ; Athanasios G. Mamalis3 ; 1National TU of Athens, Athens, Greece; 2TEI of Chalkida, Chalcis, Greece; 3PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 296 [Abstract]

13:00 LUNCH

SESSION: ManufacturingWedPM1-R4
Energy
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Nikoloz Chikhradze; Session Monitor: TBA

14:00: [ManufacturingWedPM105]
New Designs of Rotors with Variable Geometry Parameters in Dynamics and Their Effective Use in Aviation and Wind Energy
Raul S. Turmanidze1 ; Paata Kervalishvili1 ; Giorgi Popxadze1 ; 1Georgian Technical University, Tbilisi, Georgia;
Paper Id: 162 [Abstract]

14:25: [ManufacturingWedPM106]
Structure and Properties of MgB2- and MT-YBaCuO-based Materials Manufactured Under Pressure
Tetiana Prikhna1 ; Michael Eisterer2 ; Matt Rindfleisch3 ; Athanasios G. Mamalis4 ; Michael Tomsic3 ; Vitaliy Romaka5 ; Semyon Ponomarov6 ; 1Institute for Superhard Materials, Kiev, Ukraine; 2Atominstitut, Technische Universität Wien, Vienna, Austria; 3Hyper Tech Research, Inc., Columbus, United States; 4PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 5Lviv Polytechnic National University, Lviv, Ukraine; 6Institute of Semiconductor Physics, Kiev, Ukraine;
Paper Id: 121 [Abstract]

14:50: [ManufacturingWedPM107]
ENERGY CLOUD Service and TOMONI - Holistic Solutions for Energy Intensive Industries
Emmanuel Kakaras1 ; Michalis Agraniotis1 ; Christian Bergins1 ; Torsten Buddenberg1 ; 1Mitsubishi Hitachi Power Systems Europe GmbH, Duisburg, Germany;
Paper Id: 80 [Abstract]

15:15: [ManufacturingWedPM108]
A New Ruthenium(II) Photosensitizer With Bipyridines Containing Electron Donor/Withdrawing Groups
Fernando Federico Salomón1 ; Mauricio Cattaneo2 ; Néstor Katz3 ; 1INQUINOA, San Miguel de Tucumán, Argentina; 2INQUINOA, San Miguel de Tucuman, Argentina; 3Professor, San Miguel de Tucuman, Argentina;
Paper Id: 90 [Abstract]

15:40 Break

SESSION: ManufacturingWedPM2-R4
Environmental Aspects / Impact on Climate Change
Mamalis International Symposium on Advanced Manufacturing of Advanced Materials and Structures with Sustainable Industrial Applications
Wed Nov, 7 2018 / Room: Sao Conrado (50/2nd)
Session Chairs: Emmanuel Kakaras; Session Monitor: TBA

15:55: [ManufacturingWedPM209] Invited
Smart Cities Under Electric Energy Trends: From Autonomous Building Directive to Prosumer Target
Nikolaos T. Athanassoulis1 ; Aggelos Tsakanikas1 ; Antonios G. Kladas2 ; 1Laboratory of Industrial and Energy Economics, NTUA, Athens, Greece; 2NTUA, Athens, Greece;
Paper Id: 51 [Abstract]

16:20: [ManufacturingWedPM210]
DFT Insights into the Role of Relative Positions of Fe and N Dopants on the Structure and Properties of TiO2
Sahar Ramin Gul1 ; Matiullah Khan2 ; Zeng Yi3 ; Bo Wu1 ; Athanasios G. Mamalis4 ; 1Multiscale Computational Materials Facility, College of Materials Science and Engineering, Fuzhou University, Fuzhou, China; 2Kohat University of Science and Technology, Kohat, Pakistan; 3State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China; 4PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece;
Paper Id: 32 [Abstract]

16:45: [ManufacturingWedPM211]
Reduction of Transport Impact on Air Quality due to New Conception of Hydrogen Storage
Tetiana Prikhna1 ; Mykola Monastyrov2 ; Petro Talanchuk3 ; Athanasios G. Mamalis4 ; Fernand Marquis5 ; Bernd Halbedel6 ; 1Institute for Superhard Materials, Kiev, Ukraine; 2Open International University of Human Development Ukraine, Kiev, Ukraine; 3Open International University of Human Development Ukraine, Kyiv, Ukraine; 4PC-NAE,Demokritos National Center for Scientific Research, Athens, Greece; 5San Diego State University, San Diego, United States; 6Technische Universitat Ilmenau, Ilmenau, Germany;
Paper Id: 140 [Abstract]

17:10: [ManufacturingWedPM212]
Stroboscopic Method of Fluorescence Analyses of Optically Dense Media
Nugzar Gomidze1 ; Izolda Jabnidze1 ; Zhuzhuna Diasamidze1 ; Lali Kalandadze2 ; Omar Nakashidze1 ; Kakha Makharadze1 ; Miranda Khajishvili1 ; Zebur Surmanidze1 ; 1Batumi Shota Rustaveli State University, Batumi, Georgia; 2Batumi Shota Rustaveli State University, Batumi, Georgia;
Paper Id: 275 [Abstract]

17:35 Break

SESSION: SISAMMonAM-R5
SPD Nanomaterials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Mon Nov, 5 2018 / Room: Copacabana A (150/1st)
Session Chairs: Ruslan Valiev; Werner Skrotzki; Session Monitor: TBA

11:20: [SISAMMonAM01] Keynote
Recent Advances in SPD Processing of Nanomaterials with Superior Properties
Ruslan Valiev1 ; 1Ufa State Aviation Technical University, Ufa, Russian Federation;
Paper Id: 228 [Abstract]

11:45: [SISAMMonAM02] Invited
Exploring the Paradox of Strength and Ductility
Terence G. Langdon1 ; Roberto B. Figueiredo2 ; Praveen Kumar3 ; Megumi Kawasaki4 ; 1University of Southampton, Southampton, United Kingdom; 2Federal University of Minas Gerais, Belo Horizonte, Brazil; 3Indian Institute of Science, Bangalore, India; 4Oregon State University, Corvallis, United States;
Paper Id: 233 [Abstract]

12:10: [SISAMMonAM03] Invited
Effect of Texture on Shear Banding in ECAP
Werner Skrotzki1 ; Laszlo Toth2 ; Laura Lienshoeft1 ; Julius Huhn1 ; Philipp Frint3 ; Martin Franz-xaver Wagner3 ; 1Dresden University of Technology, Dresden, Germany; 2Lorraine University, Metz, France; 3Chemnitz University of Technology, Chemnitz, Germany;
Paper Id: 270 [Abstract]

12:35: [SISAMMonAM04] Invited
A New Continuous Severe Plastic Deformation Process for Metal Sheets: Single-roll Angular Rolling
Hyoung Seop Kim1 ; Hak Hyeon Lee2 ; 1POSTECH, Pohang, South Korea; 2Pohang University of Science and Technology, Pohang, South Korea;
Paper Id: 324 [Abstract]

13:00 LUNCH

SESSION: SISAMMonPM1-R5
Current Intelligent Sustainable Advanced Materials like Graphene, CNTs, High Entropy Alloys
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Mon Nov, 5 2018 / Room: Copacabana A (150/1st)
Session Chairs: Terry Lowe; Yuntian Zhu; Session Monitor: TBA

14:00: [SISAMMonPM105] Keynote
Heterostructured Materials: A New Paradigm for Designing Metals for Superior Mechanical Properties
Yuntian Zhu1 ; 1North Carolina State University, Raleigh, United States;
Paper Id: 291 [Abstract]

14:25: [SISAMMonPM106] Invited
Diffusive and Displacive Phase Transformations Driven by High Pressure Torsion
Boris Straumal1 ; Askar Kilmametov2 ; Olga Kogtenkova3 ; Andrey Mazilkin2 ; Brigitte Baretzky2 ; 1Institute of Solid State Physics RAS, Chernogolovka, Russian Federation; 2Institute of Nanotechnology, Eggenstein-Leopoldshafen, Germany; 3Institute of Solid State Physics, Chernogolovka, Russian Federation;
Paper Id: 302 [Abstract]

14:50: [SISAMMonPM107] Keynote
Dislocation Mediated Plasticity During the Deformation of Semicrystalline Polymers
Florian Spieckermann1 ; Harald Wilhelm2 ; Gerald Polt3 ; Mohammad Zareghomsheh3 ; Michael J. Zehetbauer4 ; 1University of Leoben, Leoben, Austria; 2LKT-TGM, 1200, Austria; 3University of Vienna, 1090, Austria; 4University of Vienna, Wien, Austria;
Paper Id: 132 [Abstract]

15:15: [SISAMMonPM108] Invited
Emergence of Industrial Production of High Performance Metals by Severe Plastic Deformation
Terry Lowe1 ; 1Colorado School of Mines, Golden, United States;
Paper Id: 345 [Abstract]

15:40 Break

SESSION: SISAMMonPM2-R5
H2-Storage Advanced Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Mon Nov, 5 2018 / Room: Copacabana A (150/1st)
Session Chairs: Zenji Horita; Christine Borchers; Session Monitor: TBA

15:55: [SISAMMonPM209] Keynote
Severe Plastic Deformation for Production of High-performance Hydrogen Storage Materials
Zenji Horita1 ; 1Kyushu University, Fukuoka, Japan;
Paper Id: 271 [Abstract]

16:20: [SISAMMonPM210] Invited
Controlling Hydrogen Absorption and Release Kinetics of Palladium Through Surface Structural Modifications
Shohei Ogura1 ; Koichi Kato1 ; Katsuyuki Fukutani1 ; Ohno Satoshi1 ; Markus Wilde1 ; 1Institute of Industrial Science, The University of Tokyo, Tokyo, Japan;
Paper Id: 391 [Abstract]

16:45: [SISAMMonPM211] Invited
Solute-defect Interaction in the Framework of a Defactant Concept
Christine Borchers1 ; Reiner Kirchheim2 ; 1Univ. Goettingen, Institute f. Materialphysik, Goettingen, Germany; 2Univ. Goettingen, Institut f. Materialphysik, 37077 Goettingen, Germany;
Paper Id: 293 [Abstract]

17:10: [SISAMMonPM212] Invited
Long-term Hydrogen Storage in Mg and ZK60 After Severe Plastic Deformation
Gerhard Krexner1 ; Michael J. Zehetbauer2 ; 1University of Vienna, Vienna, Austria; 2University of Vienna, Wien, Austria;
Paper Id: 299 [Abstract]

17:35 Break

SESSION: SISAMMonPM3-R5
H2-Storage Advanced Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Mon Nov, 5 2018 / Room: Copacabana A (150/1st)
Session Chairs: Zenji Horita; Christine Borchers; Session Monitor: TBA

17:40: [SISAMMonPM313] Invited
Effect of Hydrogen on Generation of Lattice Defects and Defect Hardening of Plastically Deformed Palladium
Yuzeng Chen1 ; Daria Setman2 ; Jakub Cizek3 ; Christine Borchers4 ; Reiner Kirchheim5 ; Martin Deutges6 ; 1Northwestern Polytechnique University, China, Xi'an, China; 2University of Vienna, Vienna, Austria; 3Charles University in Prague, Prague, Czech Republic; 4Univ. Goettingen, Institute f. Materialphysik, Goettingen, Germany; 5Univ. Goettingen, Institut f. Materialphysik, 37077 Goettingen, Germany; 6Universität Göttingen, Göttingen, Germany;
Paper Id: 312 [Abstract]

SESSION: SISAMTueAM-R5
SPD Nanomaterials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Tue Nov, 6 2018 / Room: Copacabana A (150/1st)
Session Chairs: Malgorzata Lewandowska; Boris Straumal; Session Monitor: TBA

11:20: [SISAMTueAM01] Keynote
Plasticity Induced Grain Boundary Migration
Reinhard Pippan1 ; Oliver Renk2 ; Marlene Kapp1 ; Karoline Komout1 ; Pradpita Ghosh1 ; Anton Hohenwarter3 ; 1Austrian Academy of Sciences, Leoben, Austria; 2Erich Schmid Institut of Materials Science, Austrian Academy of Sciences, Leoben, Austria; 3Montanuniversitaet Leoben, Leoben, Austria;
Paper Id: 311 [Abstract]

11:45: [SISAMTueAM02] Invited
Ultrafine-grained Plates with Enhanced Mechanical Properties, Low Anisotropy and Good Formability
Malgorzata Lewandowska1 ; Marta Ciemiorek1 ; Lech Olejnik1 ; Witold Chrominski1 ; 1Warsaw University of Technology, Warsaw, Poland;
Paper Id: 239 [Abstract]

12:10: [SISAMTueAM03] Invited
Properties of a Lean Silver Alloy After Equal Channel Angular Pressing and Conventional Post-deformation
Maciej Krystian1 ; Bernhard Mingler1 ; Jelena Horky2 ; Damien Colas3 ; Frédéric Diologent4 ; 1AIT Austrian Institute of Technology GmbH, Wiener Neustadt, Austria; 2Austrian Institute of Technology, Seibersdorf, Austria; 3Varinor SA, Delémont, Switzerland; 4Varinor Sa, Delémont, Switzerland;
Paper Id: 353 [Abstract]

12:35: [SISAMTueAM04]
Effect of Equal Channel Angular Pressing on Structure, Texture, and Mechanical Properties of a Magnesium Alloy Containing Rare Earth Elements
Boris Straumal1 ; Natalia Martynenko2 ; Elena Lukyanova2 ; Georgy Raab3 ; Sergey Dobatkin4 ; Yuri Estrin5 ; 1Institute of Solid State Physics RAS, Chernogolovka, Russian Federation; 2National University of Science and Technology MISiS, Moscow, Russian Federation; 3UGATU, Ufa, Russian Federation; 4NUST MISiS, Moscow, Russian Federation; 5Monash University, Centre for Advanced Hybrid Materials, Clayton, Australia;
Paper Id: 309 [Abstract]

13:00 LUNCH

SESSION: SISAMTuePM1-R5
Amorphous Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Tue Nov, 6 2018 / Room: Copacabana A (150/1st)
Session Chairs: A. Lindsay Greer; Maria Dolores Baró; Session Monitor: TBA

14:00: [SISAMTuePM105] Keynote
Metallic Glasses: A Range of States Offering Exceptional Mechanical Properties
A. Lindsay Greer1 ; 1University of Cambridge, Cambridge, United Kingdom;
Paper Id: 154 [Abstract]

14:25: [SISAMTuePM106] Invited
Designing Ductile Bulk Metallic Glasses and Composites for Engineering Applications
Juergen Eckert1 ; 1Erich Schmid Institute of Materials Science, Leoben, Austria;
Paper Id: 204 [Abstract]

14:50: [SISAMTuePM107] Invited
Rare Earth-containing Multi-component Metallic Glasses
Jean-marie Dubois1 ; Luka Kelhar2 ; Saso Sturm3 ; Spomenka Kobe4 ; 1JSI - K7 Dpt for Nanostructured Materials, Ljubljana, Slovenia; 2JSI - K7 Dpt, Ljubljana, Slovenia; 3Jozef Stean Institute, Ljubljana, Slovenia; 4Josef Stefan Institute, Ljubljana, Slovenia;
Paper Id: 143 [Abstract]

15:15: [SISAMTuePM108] Invited
Using Femtosecond Pulsed Laser Irradiation (FSPLI) to Magnetically Pattern the Surface of Non-ferromagnetic Amorphous Steel
Maria Dolores Baró1 ; Huiyan Zhang2 ; Yuping Feng3 ; Santiago Surinyach4 ; Eva Pellicer5 ; Jordi Sort5 ; 1Universitat Autònoma de Barcelona, Cerdanyola del Vallès, Spain; 2Departament de Fisica, UAB, Bellaterra, Spain; 3Fac. Ciencies, Bellaterra, Spain; 4Fac. Ciencies,, Bellaterra, Spain; 5Dept. Fisica, Bellaterra, Spain;
Paper Id: 362 [Abstract]

15:40 Break

SESSION: SISAMTuePM2-R5
Computational Simulation of ISAM
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Tue Nov, 6 2018 / Room: Copacabana A (150/1st)
Session Chairs: Laszlo Toth; Adelia Aquino; Session Monitor: TBA

15:55: [SISAMTuePM209] Keynote
The Diverse Role of Polycyclic Aromatic Hydrocarbons: Basis for Polyradicaloid Character Leading to New Optoelectronic Devices and Origin for Luminescence in Carbon Nanodots
Hans Lischka1 ; 1Tianjin University, Tianjin, China;
Paper Id: 377 [Abstract]

16:20: [SISAMTuePM210] Invited
A Computational Study of π-π Stacking Interactions Using High-Level Ab Initio Methods and Density Functional Methods
Adelia Aquino1 ; 1Tianjin University, Tianjin, China;
Paper Id: 379 [Abstract]

16:45: [SISAMTuePM211] Invited
Insights in the Variations of Deformation Mechanisms in Polycrystals With the Help of Texture Modeling from Macro to Nano Grain Sizes
Laszlo Toth1 ; 1Lorraine University, Metz, France;
Paper Id: 308 [Abstract]

17:10: [SISAMTuePM212] Invited
On The Computational Design Of Ti- and Fe-Based Advanced Materials For Biomedical Applications
Christina Lekka1 ; J.j. Guttierez Moreno2 ; Carla Cutrano1 ; K Ioannou1 ; Dimitris Papageorgiou1 ; Giorgos Evangelakis1 ; 1University of Ioannina, Ioannina, Greece; 2University of Tyndall, Tyndal, Ireland;
Paper Id: 246 [Abstract]

17:35 Break

SESSION: SISAMTuePM3-R5
ISAM Industrial Applications
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Tue Nov, 6 2018 / Room: Copacabana A (150/1st)
Session Chairs: Laszlo Toth; Adelia Aquino; Session Monitor: TBA

17:40: [SISAMTuePM313] Invited
Socioeconomic Pathways and Their Guidance Towards a Renewable Power Generation Dominated Market
Tamer Turna1 ; 1TES Energy Consulting, Istanbul, Turkey;
Paper Id: 298 [Abstract]

SESSION: SISAMWedAM-R5
Nano-Analytic Methods
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Wed Nov, 7 2018 / Room: Copacabana A (150/1st)
Session Chairs: Erhard Schafler; Golta Khatibi; Session Monitor: TBA

11:20: [SISAMWedAM01] Keynote
X-ray and Neutron Diffraction for Characterizing Microstructure
Tamas Ungar1 ; 1Eötvös Loránd University, Manchester, United Kingdom;
Paper Id: 193 [Abstract]

11:45: [SISAMWedAM02] Invited
In-situ X-ray Synchrotron Profile Analysis during High Pressure Torsion Deformation
Erhard Schafler1 ; Michael Kerber2 ; Florian Spieckermann3 ; 1University of Vienna, Wien, Austria; 2Faculty of Physics, University of Vienna, Vienna, Austria; 3University of Leoben, Leoben, Austria;
Paper Id: 241 [Abstract]

12:10: [SISAMWedAM03] Invited
Liquid Environment Spherical Depth Sensing Indentation: Toward the Mechanical Characterization of Living Tissue
Jean-philippe Jehl1 ; Richard Kouitat Njiwa2 ; Pablo Maureira3 ; 1Institut Jean Lamour, Nancy, France; 2Institut Jean Lamour (UMR 7198 CNRS-Uninersite de lorraine), Nancy, France; 3INSERM U961, Nancy, France;
Paper Id: 211 [Abstract]

12:35: [SISAMWedAM04] Invited
Lifetime and Reliability of Small-scaled Multilayered Structures
Golta Khatibi1 ; Bernhard Czerny2 ; Thomas Walter2 ; Agnieszka Betzwar2 ; Martin Lederer2 ; 1TUWien, Institute for Chemical Technologies and Analytics, Vienna, Austria; 2TU Wien, Vienna, Austria;
Paper Id: 407 [Abstract]

13:00 LUNCH

SESSION: SISAMWedPM1-R5
Functional Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Wed Nov, 7 2018 / Room: Copacabana A (150/1st)
Session Chairs: Ernst Bauer; Gerda Rogl; Session Monitor: TBA

14:00: [SISAMWedPM105] Keynote
Spinodal Decomposition in High-Entropy Half-Heusler Thermoelectrics with High ZT~1.5
Peter Rogl1 ; 1University of Vienna, Faculty of Chemistry, Wien, Austria;
Paper Id: 189 [Abstract]

14:25: [SISAMWedPM106] Invited
Bulk and Thin-film Stoichiometric and Off-stoichiometric Full Heusler Thermoelectric Systems Based on Fe&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt;VAl
Ernst Bauer1 ; Bernhard Hinterleitner2 ; Michael Poneder2 ; Christoph Eisenmenger2 ; Johannes Rehak2 ; Rene Moser2 ; Raimund Podloucky3 ; Takao Mori4 ; Xing-qiu Chen5 ; 1Technische Universität Wien, Vienna, Austria; 2Universität Wien, Vienna, Austria; 3Universität Wien, Wien, Austria; 4NIMS Tsukuba, Tsukuba, Japan; 5NIMS Tsukuba, Shenyang, China;
Paper Id: 226 [Abstract]

14:50: [SISAMWedPM107] Invited
Severe Plastic Deformation via High Pressure Torsion in Thermoelectrics
Gerda Rogl1 ; Peter Rogl2 ; Ernst Bauer3 ; Michael J. Zehetbauer4 ; 1Christian Doppler Laboratory for Thermoelectricity, Wien, Austria; 2University of Vienna, Faculty of Chemistry, Wien, Austria; 3Technische Universität Wien, Vienna, Austria; 4University of Vienna, Wien, Austria;
Paper Id: 188 [Abstract]

15:15: [SISAMWedPM108] Invited
Advanced Mechanical Processing of ZK60 and ZK60 + Mm Alloys for Hydrogen Storage Applications
Daniel Rodrigo Leiva1 ; Erenilton Pereira Silva1 ; Juliano Soyama2 ; Haroldo Cavalcanti Pinto3 ; Claudio Shyinti Kiminami4 ; Tomaz Toshimi Ishikawa1 ; Walter Jose Botta5 ; 1Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, São Carlos, Brazil; 2Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas, Campinas, Brazil; 3Departamento de Engenharia de Materiais, Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos, Brazil; 4UFSCar (Federal University of São Carlos), Sao Carlos, Brazil; 5UFSCar (Federal University of Sao Carlos), Sao Carlos, Brazil;
Paper Id: 409 [Abstract]

15:40 Break

SESSION: SISAMWedPM2-R5
Functional Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Wed Nov, 7 2018 / Room: Copacabana A (150/1st)
Session Chairs: Spomenka Kobe; João Paulo Sinnecker; Session Monitor: TBA

15:55: [SISAMWedPM209] Keynote
Magnetism in Micro and Nanostructures: Magnetic Recording and Magnonics
João Paulo Sinnecker1 ; Elis Helena De Campos Pinto Sinnecker2 ; Danilo Froes Batista3 ; 1Centro Brasileiro de Pesquisas Físicas, Rio de Janeiro, Brazil; 2Instituto de Fisica, UFRJ, Rio de Janeiro, Brazil; 3Centro Brasileiro de Pesquisas Fisicas, Rio de Janeiro, Brazil;
Paper Id: 381 [Abstract]

16:20: [SISAMWedPM210] Invited
Magnetostriction of Current Fe-based Alloys: An Overview
Cristina Bormio Nunes1 ; Guilherme O. Fulop2 ; Mateus B. S. Dias2 ; Fabio M. Cardoso2 ; 1Universidade de São Paulo, Escola de Engenharia de Lorena, Lorena, SP, Brasil, Lorena, Brazil; 2Universidade de Sao Paulo, Escola de Engenharia de Lorena, Lorena, SP, Brasil, Lorena, Brazil;
Paper Id: 368 [Abstract]

16:45: [SISAMWedPM211] Keynote
Magnetic Materials - Physics and Future Aspects
Roland Groessinger1 ; 1Vienna University of Technology, Faculty of Physics, Wien, Austria;
Paper Id: 274 [Abstract]

17:10: [SISAMWedPM212] Invited
Novel Multicomponent Magnets Using Less Critical Raw Materials for Sustainable Use
Tomaž Tomše1 ; Jean-marie Dubois2 ; Spomenka Kobe3 ; 1Jožef Stefan Institute, Ljubljana, Slovenia; 2Institut Jean Lamour, Nancy, France; 3Josef Stefan Institute, Ljubljana, Slovenia;
Paper Id: 306 [Abstract]

17:35 Break

SESSION: SISAMWedPM3-R5
Functional Materials
Zehetbauer International Symposium on Science of Intelligent and Sustainable Advanced Materials (4th Intl. Symp. on Science of Intelligent and Sustainable Advanced Materials (SISAM))
Wed Nov, 7 2018 / Room: Copacabana A (150/1st)
Session Chairs: Spomenka Kobe; João Paulo Sinnecker; Session Monitor: TBA

17:40: [SISAMWedPM313] Invited
Novel Biocompatible Ni- and Cu-free Ti-based Amorphous Alloys: Thermal Stability, Corrosion Resistance and Apatite-forming Ability
Mariana Calin1 ; Somayeh Abdi1 ; Juergen Eckert2 ; Annett Gebert1 ; 1IFW Dresden, Dresden, Germany; 2Erich Schmid Institute of Materials Science, Leoben, Austria;
Paper Id: 30 [Abstract]

18:05: [SISAMWedPM314]
Optimization of Mechanical and Corrosion Properties of Biodegradable Mg-Zn-Ca Alloys by SPD-Processing and Additional Heat Treatment
Michael J. Zehetbauer1 ; Andrea Ojdanic1 ; Erhard Schafler1 ; Jelena Horky2 ; Bernhard Mingler3 ; Dmytro Orlov4 ; 1University of Vienna, Wien, Austria; 2Austrian Institute of Technology, Seibersdorf, Austria; 3AIT Austrian Institute of Technology GmbH, Wiener Neustadt, Austria; 4Division Mater.Engineering, Dep. Mech. Engineering, Lund University, Lund, Sweden;
Paper Id: 424 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: AdvancedMaterialsMonAM-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Mon Nov, 5 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Fernand Marquis; Alain Tressaud; Session Monitor: TBA

11:20: [AdvancedMaterialsMonAM01] Keynote
Design of Lanthanide-based Phosphors Using Quantum Chemical Calculations
Werner Urland1 ; 1Private Institute of Theoretical Chemical Physics, Muralto, Switzerland;
Paper Id: 52 [Abstract]

11:45: [AdvancedMaterialsMonAM02] Invited
Development of Hybrid Reinforced Corrosion Resistant Polymer Concretes
Nikoloz Chikhradze1 ; Fernand Marquis2 ; Guram Abashidze1 ; Davit Tsverava3 ; 1G. Tsulukidze Mining Institute, Tbilisi, Georgia; 2San Diego State University, San Diego, United States; 3LEPL Grigol Tsulukidze Mining Institute/M.Sc. Student of Georgian Technical University, Tbilisi, Georgia;
Paper Id: 59 [Abstract]

12:10: [AdvancedMaterialsMonAM03]
Climbing the Pyramid to Clean, Commercially Useful, Acid Induced Polymerizations
Stewart Lewis1 ; 1Pyramid Polymers LLC, New Kensington, United States;
Paper Id: 19 [Abstract]

12:35: [AdvancedMaterialsMonAM04]
Climbing the Pyramid to Clean, Commercially Useful, Acid Induced Polymerizations (Part II)
Stewart Lewis1 ; 1Pyramid Polymers LLC, New Kensington, United States;
Paper Id: 339 [Abstract]

13:00 LUNCH

SESSION: AdvancedMaterialsMonPM1-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Mon Nov, 5 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Janina Molenda; Michael Zharnikov; Session Monitor: TBA

14:00: [AdvancedMaterialsMonPM105] Keynote
Fabrication and Potential Applications of Novel Poly(ethylene glycol) Hydrogel Films and Nanomembranes
Michael Zharnikov1 ; 1Heidelberg University, Heidelberg, Germany;
Paper Id: 74 [Abstract]

14:25: [AdvancedMaterialsMonPM106] Invited
A Concept of Embedded Dipole in Interfacial Engineering and its Applications in Organic Electronics
Michael Zharnikov1 ; 1Heidelberg University, Heidelberg, Germany;
Paper Id: 75 [Abstract]

14:50: [AdvancedMaterialsMonPM107] Invited
Cathode Electronic Structure Impact on the Parameters of Lithium and Sodium Batteries
Janina Molenda1 ; 1AGH University of Science and Technology, Kraków, Kraków, Poland;
Paper Id: 22 [Abstract]

15:15: [AdvancedMaterialsMonPM108] Invited
Fabrication of Nanocomposites by Mechanical Alloying and Explosive Consolidation
Nikoloz Chikhradze1 ; Guram Abashidze1 ; Fernand Marquis2 ; Mikheil Chikhradze3 ; 1G. Tsulukidze Mining Institute, Tbilisi, Georgia; 2San Diego State University, San Diego, United States; 3Georgian Technical University, Tbilisi, Georgia;
Paper Id: 212 [Abstract]

15:40 Break

SESSION: AdvancedMaterialsMonPM2-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Mon Nov, 5 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Tetiana Prikhna; Joseph Newkirk; Session Monitor: TBA

15:55: [AdvancedMaterialsMonPM209] Keynote
Creating the Materials of Tomorrow
Joseph Newkirk1 ; 1Missouri University of Science & Technolgy, Rolla, United States;
Paper Id: 27 [Abstract]

16:20: [AdvancedMaterialsMonPM210] Invited
Electroerosion Coagulation and Dispersion for Complex Water Purification, Waste Recycling and Manufacturing of Metals, Oxides, and Alloys Nanopowders
Mykola Monastyrov1 ; Tetiana Prikhna2 ; Bernd Halbedel3 ; Gennadii Kochetov4 ; Fernand Marquis5 ; 1Open International University of Human Development Ukraine, Kiev, Ukraine; 2Institute for Superhard Materials, Kiev, Ukraine; 3Technische Universitat Ilmenau, Ilmenau, Germany; 4NATIONAL UNIVERSITY OF CONSTRUCTION AND ARCHITECTURE, Kyiv, Ukraine; 5San Diego State University, San Diego, United States;
Paper Id: 122 [Abstract]

16:45: [AdvancedMaterialsMonPM211]
The Quest for Electronic Ferroelectricity in Organic Charge-transfer Crystals
Alberto Girlando1 ; 1Parma University, Parma, Italy;
Paper Id: 108 [Abstract]

17:10: [AdvancedMaterialsMonPM212] Keynote
Understanding the Behaviour of Advanced Alloys is Critical to Safe and Reliable Performance of Modern Equipment in the Energy Sector
Jonathan David Parker1 ; 1EPRI, Charlotte, United States;
Paper Id: 327 [Abstract]

17:35 Break

SESSION: AdvancedMaterialsMonPM3-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Mon Nov, 5 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Krzysztof Wierzbanowski; Andrzej Baczmanski; Session Monitor: TBA

17:40: [AdvancedMaterialsMonPM313] Invited
Microstructure, Texture and Mechanical Characteristics of Polycrystalline Copper After Asymmetric Rolling
Agnieszka Uniwersał1 ; Krzysztof Wierzbanowski1 ; Mirosław Wrobel1 ; Sebastian Wronski1 ; Marcin Wronski1 ;0 ; 1AGH University of Science and Technology, Kraków, Poland;
Paper Id: 200 [Abstract]

18:05: [AdvancedMaterialsMonPM314] Invited
Intergranular Stresses and Micro-damage Process in Two-phase Materials Studied Using Diffraction and Self-consistent Model
Andrzej Baczmanski1 ; Elzbieta Gadalinska2 ; Sebastian Wronski3 ; Przemyslaw Kot3 ; Christian Scheffzuek4 ; Gizo Bokuchava4 ; Lea Le Joncour5 ; Yuchen Zhao5 ; 1AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Krakow, Poland; 2Institute of Aviation, Warszawa, Poland; 3AGH-University of Science and Technology, WFiIS, Krakow, Poland; 4FLNP, Joint Institute for Nuclear Research, Dubna, Russian Federation; 5ICD-LASMIS, Universite de Technologie de Troyes, Troyes, France;
Paper Id: 213 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: AdvancedMaterialsTueAM-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Tue Nov, 6 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Raphael Semiat; Alexander Yarin; Session Monitor: TBA

11:20: [AdvancedMaterialsTueAM01] Keynote
Environmental and Energy Issues in Water Treatment Processes
Raphael Semiat1 ; 1Technion IIT, Haifa, Israel;
Paper Id: 10 [Abstract]

11:45: [AdvancedMaterialsTueAM02] Keynote
Self-healing Nano-textured Engineering Vascular Materials
Alexander Yarin1 ; 1University of Illinois at Chicago, Chicago, United States;
Paper Id: 14 [Abstract]

12:10: [AdvancedMaterialsTueAM03] Keynote
Wear-resistant MAX phases-based Materials of Ti-Al-C System for Electrical Transport
Tetiana Prikhna1 ; Orest Ostash2 ; Vladimir Sverdun3 ; Viktoriya Podhurska4 ; Fernand Marquis5 ; Myroslav Karpets1 ; Semyon Ponomarov6 ; Alexandra Starostina3 ; Thierry Cabioc'h7 ; 1Institute for Superhard Materials, Kiev, Ukraine; 2Karpenko Physical-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine; 3Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kiev, Ukraine; 4Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine; 5San Diego State University, San Diego, United States; 6Institute of Semiconductor Physics, Kiev, Ukraine; 7Universite de Poitiers, CNRS/Laboratoire PHYMAT, Chasseneuil Futuroscope Cedex, France;
Paper Id: 125 [Abstract]

12:35: [AdvancedMaterialsTueAM04]
One-dimensional Nanomaterials for Emerging Energy Storage
Liqiang Mai1 ; 1Wuhan University of Technology, Wuhan, China;
Paper Id: 209 [Abstract]

13:00 LUNCH

SESSION: AdvancedMaterialsTuePM1-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Tue Nov, 6 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Barbara Szpunar; Jerry Bernholc; Session Monitor: TBA

14:00: [AdvancedMaterialsTuePM105] Keynote
Application of State-of-the-Art Calculations in the Design of Accident Tolerant Nuclear Materials
Barbara Szpunar1 ; 1University of Saskatchewan, Saskatoon, Canada;
Paper Id: 300 [Abstract]

14:25: [AdvancedMaterialsTuePM106] Keynote
Computational Exploration and Design of Nanoscale Sensors and Devices
Jerry Bernholc1 ; 1NC State University, Raleigh, United States;
Paper Id: 333 [Abstract]

14:50: [AdvancedMaterialsTuePM107]
The Importance of Polymer Topology in Surface Absorption
Giuseppe Pellicane1 ; Mesfin Tsige2 ; Francis Gaitho1 ; 1University of KwaZulu-Natal, Pietermaritzburg, South Africa; 2University of Akron, Akron, United States;
Paper Id: 282 [Abstract]

15:15: [AdvancedMaterialsTuePM108]
Thermionic Generators with Linear and Non-linear Electron Dispersion Relations: Chances and Limits
York Christian Gerstenmaier1 ; Gerhard Wachutka2 ; 1Institute for Physics of Electrotechnology, Technische Universitaet Muenchen, Munich (Muenchen), Germany; 2Institute for Physics of Electrotechnology, Technische Universität Muenchen, Munich (Muenchen), Germany;
Paper Id: 248 [Abstract]

15:40 Break

SESSION: AdvancedMaterialsTuePM2-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Tue Nov, 6 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Ephraim Eliav; Raphael Semiat; Session Monitor: TBA

15:55: [AdvancedMaterialsTuePM209] Keynote
Fluoride Materials for Advanced Technologies, Energy, and Sustainable Issues
Alain Tressaud1 ; 1ICMCB-CNRS, University Bordeaux, Pessac, France;
Paper Id: 357 [Abstract]

16:20: [AdvancedMaterialsTuePM210] Invited
Nanotechnologies for Removing Contaminants From Water
Raphael Semiat1 ; 1Technion IIT, Haifa, Israel;
Paper Id: 11 [Abstract]

16:45: [AdvancedMaterialsTuePM211] Keynote
Electronic Structure and Energetic Properties of Relativistic Quantum Dots
Ephraim Eliav1 ; 1School of Chemistry, Tel Aviv University, Tel Aviv, Israel;
Paper Id: 161 [Abstract]

17:10: [AdvancedMaterialsTuePM212]
Inkjet Printing Nano-functionalization of Energy Materials
Rumen Tomov1 ; T Mitchell Williams1 ; Simon Hopkins2 ; Vasant Kumar3 ; B Glowacki1 ; 1University of Cambridge, Cambridge, United Kingdom; 2Research Fellow, Geneva, Switzerland; 3University of Cambridge, Cambridge, United Kingdom ;
Paper Id: 393 [Abstract]

17:35 Break

SESSION: AdvancedMaterialsTuePM3-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Tue Nov, 6 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Pengwan Chen; Werner Urland; Session Monitor: TBA

17:40: [AdvancedMaterialsTuePM313] Keynote
Synthesis and Densification of Heterogeneous Ultrafine and Nanostructured Materials by High Rate Energy Processes
Fernand Marquis1 ; Nikoloz Chikhradze2 ; Tetiana Prikhna3 ; Pengwan Chen4 ; Eugene Olevsky1 ; 1San Diego State University, San Diego, United States; 2G. Tsulukidze Mining Institute, Tbilisi, Georgia; 3Institute for Superhard Materials, Kiev, Ukraine; 4Beijing Institute of Technology, Beijing, China;
Paper Id: 422 [Abstract]

18:05: [AdvancedMaterialsTuePM314] Keynote
Shock Induced Elemental Doping of Materials
Pengwan Chen1 ; Xin Gao1 ; Chunxiao Xu1 ; Jianjun Liu2 ; Xiang Gao1 ; 1Beijing Institute of Technology, Beijing, China; 2State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, China;
Paper Id: 421 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: AdvancedMaterialsWedAM-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Patrick Ching-Ho Hsieh; Udo Schwingenschlogl; Session Monitor: TBA

11:20: [AdvancedMaterialsWedAM01] Keynote
Nanotechnologies for Targeted Delivery of Cardiovascular Therapeutics
Patrick Ching-ho Hsieh1 ; 1Research Fellow, Taipei, Taiwan;
Paper Id: 8 [Abstract]

11:45: [AdvancedMaterialsWedAM02]
Ab-initio Calculations of the Thermoelectric Properties of MXenes
Udo Schwingenschlogl1 ; 1King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia;
Paper Id: 285 [Abstract]

12:10: [AdvancedMaterialsWedAM03]
High Effective Surface Area Electrodes by Electrochemically-induced Swelling of Aligned CNT Fibers
Katarzyna Krukiewicz1 ; Roman Turczyn1 ; John Bulmer2 ; Krzysztof Koziol3 ; 1Silesian University of Technology, Gliwice, Poland; 2University of Cambridge, Cambridge, United Kingdom; 3University of Cambridge, Cranfield, United Kingdom;
Paper Id: 310 [Abstract]

12:35: [AdvancedMaterialsWedAM04]
Maintenance of the Cell Motility in the Tunic of Halocynthia Roretzi
Yoko Kato1 ; 1Tohoku Gakuin University, Tagajo, Japan;
Paper Id: 273 [Abstract]

13:00 LUNCH

SESSION: AdvancedMaterialsWedPM1-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Tetiana Prikhna; Marina Nisnevitch; Session Monitor: TBA

14:00: [AdvancedMaterialsWedPM105]
Biodiesel Production from Brown Grease
Marina Nisnevitch1 ; Faina Nakonechny1 ; Mirit Kolet1 ; Daniel Zerbib1 ; 1Ariel University, Ariel, Israel;
Paper Id: 202 [Abstract]

14:25: [AdvancedMaterialsWedPM106]
Ionic Liquid Based Artificial Cellulase Type Catalysts for Cellulosic Ethanol Process
Ananda Amarasekara1 ; 1Prairie View A&M University, Prairie View, United States;
Paper Id: 50 [Abstract]

14:50: [AdvancedMaterialsWedPM107] Invited
Hot Pressed Aluminum Dodecaboride- and Boron Carbide-based Ceramics
Tetiana Prikhna1 ; Pavlo Barvitskiy1 ; Viktor Moshchil1 ; Vladislav Domnich2 ; Fernand Marquis3 ; Myroslav Karpets1 ; Sergey Dub1 ; Semyon Ponomarov4 ; Richard Haber2 ; 1Institute for Superhard Materials, Kiev, Ukraine; 2Department of Materials Science and Engineering, Rutgers, The State University of New Jersey, New Brunswick, United States; 3San Diego State University, San Diego, United States; 4Institute of Semiconductor Physics, Kiev, Ukraine;
Paper Id: 119 [Abstract]

15:15: [AdvancedMaterialsWedPM108]
Self-regulation of Living Spaces Through Material Multi-functionality
Tahir Cagin1 ; Ergun Akleman2 ; Terry Creasy3 ; Negar Kalantar3 ; Zofia Rybkowski4 ; 1Texas A&M University, College Station, United States; 2texas a&m university, college station, United States; 3TAMU, college station, United States; 4TAMU, college Station, United States;
Paper Id: 255 [Abstract]

15:40 Break

SESSION: AdvancedMaterialsWedPM2-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Hervé Martinez; Xijia Wu; Session Monitor: TBA

15:55: [AdvancedMaterialsWedPM209] Keynote
New Surface Science Investigations for the Knowledge of Electrochemical Energy Storage
Hervé Martinez1 ; 1Université de Pau et des Pays de l'Adour - IPREM CNRS UMR 5254, Pau, France;
Paper Id: 9 [Abstract]

16:20: [AdvancedMaterialsWedPM210] Keynote
Material Life Prediction for Sustainable Development
Xijia Wu1 ; 1National Research Council Canada, Ottawa, Canada;
Paper Id: 199 [Abstract]

16:45: [AdvancedMaterialsWedPM211]
MIEC-type A2BO4 ceramic membranes with enhanced oxygen permeation
Konrad Swierczek1 ; 1AGH University of Science and Technology, Faculty of Energy and Fuels, Krakow, Poland;
Paper Id: 194 [Abstract]

17:10: [AdvancedMaterialsWedPM212]
Application and Results of Oxipyr®-diluted Combustion in Aluminum Furnaces
Michael Potesser1 ; Johannes Rauch2 ; Davor Spoljaric2 ; 1MPOT GmbH / Messer Group GmbH, Gumpoldskirchen, Austria; 2Messer Group, Gumpoldskirchen, Austria;
Paper Id: 117 [Abstract]

17:35 Break

SESSION: AdvancedMaterialsWedPM3-R6
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Guaratiba (60/2nd)
Session Chairs: Pavle Radovanovic; Session Monitor: TBA

17:40: [AdvancedMaterialsWedPM313] Keynote
Plasmonic Semiconductor Nanocrystals as Multifunctional Materials
Pavle Radovanovic1 ; 1University of Waterloo, Waterloo, Canada;
Paper Id: 380 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: Non-ferrousMonAM-R7
6th Intl. Symp. on Sustainable Non-ferrous Smelting and Hydro/Electrochemical Processing
Mon Nov, 5 2018 / Room: Pontal (50/2nd)
Session Chairs: Margarita Gutierrez-Ruiz; Gustav Hanke; Session Monitor: TBA

11:20: [Non-ferrousMonAM01] Plenary
Applications and Market of Rare-earths
Marcos De Campos1 ; Jose Adilson De Castro1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 334 [Abstract]

11:45: [Non-ferrousMonAM02] Keynote
Characterization Strategies for Metallurgical Byproducts: Jarosite Case Study
Gustav Hanke1 ; 1, Leoben, Austria;
Paper Id: 359 [Abstract]

12:10: [Non-ferrousMonAM03] Keynote
Determination of Bioaccessibility of As and Pb in Soils Polluted With Mining Wastes: A New Equipment That Simplifies the Gastric and Intestinal Phases Measurements
Thalia Rodriguez1 ; Margarita Gutierrez Ruiz2 ; Daniel Quiroz Vivanco2 ; Agueda Ceniceros2 ; Tania Tavares3 ; Arturo Aguirre Gomez4 ; 1Faculdad de Quimica, UNAM, Mexico, Mexico; 2UNAM, Mexico, Mexico; 3UFBA, Rio de Janeiro, Brazil; 4FES Cuautitlan UNAM, Cuautitlan, Mexico;
Paper Id: 365 [Abstract]

12:35: [Non-ferrousMonAM04] Keynote
Application Study on Technology of Reducing Copper Content in Discarded Slag
Zhi Wang1 ; 1Dongying Fangyuan, Dongying, China;
Paper Id: 65 [Abstract]

13:00 LUNCH

SESSION: Non-ferrousMonPM1-R7
6th Intl. Symp. on Sustainable Non-ferrous Smelting and Hydro/Electrochemical Processing
Mon Nov, 5 2018 / Room: Pontal (50/2nd)
Session Chairs: Pavel Kozlov; JiWhan Ahn; Session Monitor: TBA

14:00: [Non-ferrousMonPM105] Plenary
A New Sustainable Process for the Gasification Coal Fines and Recovering of Metals and Alumosilicates from their Ashes
Valentin Tsymbal1 ; Inna Rybenko1 ; Alexey Olennikov2 ; Pavel Sechenov1 ; Florian Kongoli3 ; 1Siberian State Industrial University, Novokuznetzk, Russian Federation; 2Tyumen State University, Tyumen, Russian Federation; 3FLOGEN Technologies Inc., Mont-Royal, Canada;
Paper Id: 208 [Abstract]

14:25: [Non-ferrousMonPM106] Keynote
Feasibility of Producing Caustic Calcined Magnesia in Multiple Hearth Furnaces
Musa Rizaj1 ; Nurten Deva2 ; Edward Z. Obrien3 ; Florian Kongoli4 ; 1Prishtina University, Prishtina, Kosovo; 2Public University of Mitrovice - Isa Boletini - , Faculty of Geosciences, Republic of Kosova, Mitrovice, Kosovo; 3FLOGEN TECHNOLOGIES INC, Wilmington, United States; 4FLOGEN Technologies Inc., Mont-Royal, Canada;
Paper Id: 386 [Abstract]

14:50: [Non-ferrousMonPM107] Plenary
Utilization of Green Cement (CSA) with CFBC Coal Power Plant Byproducts for 3D Printing Construction Materials for Sustainable Society
Jiwhan Ahn1 ; Thenepalli Thriveni1 ; Ramakrishna Chilakala2 ; 1KIGAM (Korea Institute of Geoscience and Mineral Resources), Daejeon, Republic of South Korea; 2Hanil Cement Co Ltd.,, Daejeon, South Korea;
Paper Id: 378 [Abstract]

15:15: [Non-ferrousMonPM108] Keynote
Hydrometallurgical Processing of Industrial Copper Waste With Tin Recovery
Pavel Kozlov1 ; A. Panshin2 ; Sergey Yakornov3 ; 1UMMC-Holding, Moscow, Russian Federation; 2LLC UMMC-Holding", Verkhnyaya Pyshma, Russian Federation; 3LLC "UMMC-Holding", Verkhnya Pyshma, Russian Federation;
Paper Id: 406 [Abstract]

15:40 Break

SESSION: Non-ferrousMonPM2-R7
6th Intl. Symp. on Sustainable Non-ferrous Smelting and Hydro/Electrochemical Processing
Mon Nov, 5 2018 / Room: Pontal (50/2nd)
Session Chairs: Shefik Imeri; Andrej Ivanič; Session Monitor: TBA

15:55: [Non-ferrousMonPM209] Invited
Production of Glass Wool From the Liquid Slag of a 42 MW Electric Arc Furnace for Fe -Ni Production in Newco Ferronickel
Shefik Imeri1 ; Florian Kongoli2 ; 1MIM-GOLESH, Prishtina, Kosovo; 2FLOGEN Technologies Inc., Mont-Royal, Canada;
Paper Id: 60 [Abstract]

16:20: [Non-ferrousMonPM210]
Studying Effective Parameters in Reduction Waste Copper of Electrical Resistance Furnace Slag in Khatoonabad Smelter
Moein Koochaki1 ; 1National Iranian Copper Industries Company, Tehran, Iran, Iran;
Paper Id: 326 [Abstract]

16:45: [Non-ferrousMonPM211] Invited
Freeze/Thaw Performance of Concrete with Addition of Fly Ash and Recycled Rubber
Andrej Ivanič1 ; Sebastian Toplak2 ; Samo Lubej2 ; 1University of Maribor, Maribor, Slovenia; 2Faculty of civil engineering, transportational engineering and architecture, University of Maribor, Maribor, Slovenia;
Paper Id: 236 [Abstract]

17:10: [Non-ferrousMonPM212]
Extraction of Creatinine by Adsorption Onto Pure Micro- and Mesoporous Silica Materials
Hadj Hamaizi1 ; Leila Kharbouche2 ; Ghazala Benbakhta2 ; Mustapha Mokhtari3 ; María Dolores Gil García3 ; María Martínez Galera3 ; 1, Oran, Algeria; 2University of Oran, Oran, Algeria; 3University of Almería, Almeria, Spain;
Paper Id: 15 [Abstract]

17:35 Break

SESSION: Non-ferrousMonPM3-R7
6th Intl. Symp. on Sustainable Non-ferrous Smelting and Hydro/Electrochemical Processing
Mon Nov, 5 2018 / Room: Pontal (50/2nd)
Session Chairs: Eugene Wong; Cibele Sanchez Roboredo; Session Monitor: TBA

17:40: [Non-ferrousMonPM313]
Advantages of Using Low Alkali Cements and Industrial Waste Materials in Prevention of Alkali-silica Reaction in Concrete
Cibele Sanchez Roboredo1 ; Paul Thomas2 ; Kirk Vessalas2 ;0 ; 1, Sydney, Australia; 2University of Technology Sydney, Sydney, Australia;
Paper Id: 238 [Abstract]

18:05: [Non-ferrousMonPM314] Invited
Synthesis and Characterization of High Performance Magnesium Nanocomposites
Eugene Wong1 ; Manoj Gupta2 ; 1Newcastle University in Singapore, Singapore, Singapore; 2National University of Singapore, Singapore, Singapore;
Paper Id: 116 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: Non-ferrousTueAM-R7
6th Intl. Symp. on Sustainable Non-ferrous Smelting and Hydro/Electrochemical Processing
Tue Nov, 6 2018 / Room: Pontal (50/2nd)
Session Chairs: Zhigang Zak Fang; Vasiliy Kryukovskiy; Session Monitor: TBA

11:20: [Non-ferrousTueAM01] Keynote
Hydrogen Assisted Magnesium Reduction of TiO2 (HAMR Process)
Zhigang Zak Fang1 ; 1University of Utah, SALT LAKE CITY, United States;
Paper Id: 127 [Abstract]

11:45: [Non-ferrousTueAM02]
Alternative Aluminium Production Technologies
Vasiliy Kryukovskiy1 ; 1, Moscow, Russian Federation;
Paper Id: 128 [Abstract]

12:10: [Non-ferrousTueAM03]
High Value-added Products Development From Solid Wastes
Cang Da Qiang1 ; Lingling Zhang1 ; Yanbing Zong1 ; Yu Li1 ; Xiaoming Liu1 ; 1University of Science and Technology Beijing, Beijing, China;
Paper Id: 347 [Abstract]

12:35: [Non-ferrousTueAM04]
Pyrometallurgical Recovery of Gold From Refractory Gold Ledge Ores
Sultanbek Kozhakhmetov1 ; Sergey Kvyatkovskiy1 ; Ruslan Seisembayev1 ; Anastasiya Semenova1 ; 1Institute of Metallurgy and Ore Benefication, Almaty, Kazakhstan;
Paper Id: 84 [Abstract]

13:00 LUNCH

SESSION: MineralTuePM1-R7
5th Intl. Symp. on Sustainable Mineral Processing
Tue Nov, 6 2018 / Room: Pontal (50/2nd)
Session Chairs: Francisco Souza; Paul Slatter; Session Monitor: TBA

14:00: [MineralTuePM105]
The Impact Of Sustainable Industrial Practice On Process Suspension Rheology
Paul Slatter1 ; 1Sheridan College, Perth, WA, AUSTRALIA., Perth, Australia;
Paper Id: 330 [Abstract]

14:25: [MineralTuePM106]
The Challenges of Artisanal Mining of Kaolin in Junco do Serido, Paraiba, Brazil - Social, Environmental Implications and Small Miner's Health
Francisco Souza1 ; 1IFPB, Campina Grande, Brazil;
Paper Id: 115 [Abstract]

14:50: [MineralTuePM107]
Investigation of Microwave Route for Beneficiation of Low-grade Iron Ore
Nikhil Dhawan1 ; Veeranjaneyulu Rayapudi2 ; 1IIT-Roorkee, roorkee, India; 2IIT-ROORKEE, ROORKEE, India;
Paper Id: 332 [Abstract]

15:15: [MineralTuePM108]
Technology for Production of Ammonium Molybdate from Molybdenite by Using Indigenous Resources
Muhammad Pervaiz Bhatti1 ; Asima Munawar2 ; Zohaib Saeed2 ; 1Government College University Lahore, Lahore, Pakistan; 2Government College University Lahore, Lahore, Pakistan;
Paper Id: 166 [Abstract]

15:40 Break

SESSION: MineralTuePM2-R7
5th Intl. Symp. on Sustainable Mineral Processing
Tue Nov, 6 2018 / Room: Pontal (50/2nd)
Session Chairs: Nikhil Dhawan; Session Monitor: TBA

15:55: [MineralTuePM209]
Development of an Eco-friendly Tailing Disposal System of Iron Ore Tailing and Study of Issues
Rajan Kumar1 ; 1, Hyderabad, India;
Paper Id: 351 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: EnvironmentalWedAM-R7
7th Intl. Symp. on Environmental, Policy, Management , Health, Economic , Financial, Social Issues Related to Technology and Scientific Innovation
Wed Nov, 7 2018 / Room: Pontal (50/2nd)
Session Chairs: Kyoshik Park; Ludo Diels; Session Monitor: TBA

11:20: [EnvironmentalWedAM01] Plenary
Creating a Sustainable Future: Industrial Processing and Productive Chains
Pedro Prates Valério1 ; Elem Rocha2 ; Jesus Maria Frias Celayeta3 ; Marcelo Cardoso2 ; Erika Cristina Cren2 ; 1University Center of Belo Horizonte (UNIBH), Belo Horizonte, Brazil; 2Federal University of Minas Gerais, Belo Horizonte, Brazil; 3Dublin Institute of Technology, Dublin, Ireland;
Paper Id: 395 [Abstract]

11:45: [EnvironmentalWedAM02] Plenary
Challenges and Perspectives — Department of Mechanical Engineering Pontificia Universidade Católica do Rio de Janeiro
Mônica F. Naccache1 ; 1Pontificia Universidade Católica do Rio de Janeiro, Rio de Janeiro, Brazil;
Paper Id: 402 [Abstract]

12:10: [EnvironmentalWedAM03] Plenary
Biobased Aromatics – Challenges, Hurdles, and Opportunities
Ludo Diels1 ; 1VITO/UA, Mol, Belgium;
Paper Id: 313 [Abstract]

12:35: [EnvironmentalWedAM04]
A Study of High Accident Risk for Chemical Process
Donghoon Lee1 ; Hern Kim2 ; Yong Taek Ju1 ; Kyoshik Park3 ; 1United Safety Consulting Co., Ltd, Seoul, South Korea; 2Myongji University, Seongnam, South Korea; 3Myongji University, Yongin-si, Republic of South Korea;
Paper Id: 303 [Abstract]

13:00 LUNCH

SESSION: EnvironmentalWedPM1-R7
7th Intl. Symp. on Environmental, Policy, Management , Health, Economic , Financial, Social Issues Related to Technology and Scientific Innovation
Wed Nov, 7 2018 / Room: Pontal (50/2nd)
Session Chairs: Xin Hu; Heap-Yih Chong; Session Monitor: TBA

14:00: [EnvironmentalWedPM105]
A Novel Multi-agent Conceptual Framework for Stakeholder Management in Infrastructure Projects
Heap-yih Chong1 ; Xin Hu2 ; Xiangyu Wang2 ; 1Curtin University, Australia, Cannington, Australia; 2Curtin University, Perth, Australia;
Paper Id: 28 [Abstract]

14:25: [EnvironmentalWedPM106]
A Transformative Supply Chain Conceptual Framework for Infrastructure Projects
Xin Hu1 ; Heap-yih Chong2 ; Xiangyu Wang1 ; 1Curtin University, Perth, Australia; 2Curtin University, Australia, Cannington, Australia;
Paper Id: 29 [Abstract]

14:50: [EnvironmentalWedPM107]
Hydrological Characterization and Simulation of Processes in a Semi-arid Mountainous Catchment of the Cape Fold Belt
Faith Tatenda Jumbi1 ; Dominic Mazvimavi1 ; Julia Glenday2 ; 1University of the Western Cape, Cape Town, South Africa; 2South Africa Earth Observation Network, Cape Town, South Africa;
Paper Id: 109 [Abstract]

15:15: [EnvironmentalWedPM108]
Quantitative Assessment of Heavy Metals in Tannery Waste by the Exposure of Atomic Absorption Spectroscopy
Muhammad Pervaiz Bhatti1 ; Shakeel Ahmad2 ; Ayoub Rashid2 ; 1Government College University Lahore, Lahore, Pakistan; 2Government College University Lahore, Lahore, Pakistan;
Paper Id: 167 [Abstract]

15:40 Break

SESSION: EnvironmentalWedPM2-R7
7th Intl. Symp. on Environmental, Policy, Management , Health, Economic , Financial, Social Issues Related to Technology and Scientific Innovation
Wed Nov, 7 2018 / Room: Pontal (50/2nd)
Session Chairs: Moustafa El-Shenawy; Lokendra Ohja; Session Monitor: TBA

15:55: [EnvironmentalWedPM209]
Microbiological Quality of Bivalves and Their Water Beds Along the Mediterranean Coast of Egypt
Moustafa El Shenawy1 ; 1National Research Center, Cairo, Egypt;
Paper Id: 20 [Abstract]

16:20: [EnvironmentalWedPM210]
A Cost Effective and Sustainable Approach to Use Ladyfinger Flower (Abelmoschus Esculentus) as a Natural Indicator in Titration
Lokendra Ohja1 ; 1REGIONAL INSTITUTE OF EDUCATION, NCERT, BHOPAL, India;
Paper Id: 25 [Abstract]


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: CompositeMonAM-R8
6th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications
Mon Nov, 5 2018 / Room: Grego (50/3rd)
Session Chairs: Pawel Rokicki; Marcos de Campos; Session Monitor: TBA

11:20: [CompositeMonAM01] Plenary
Aviation Coatings for Volcanic Environments
Pawel Rokicki1 ; Marek Goral1 ; Andrzej Nowotnik2 ; 1Rzeszow University of Technology, Research and Development Laboratory for Aerospace Materials, Rzeszow, Poland; 2Rzeszow University of Technology, Rzeszow, Poland;
Paper Id: 107 [Abstract]

11:45: [CompositeMonAM02]
Improved Nanocrystalline Structures for Magnetic Recording
Marcos De Campos1 ; Jose Adilson De Castro1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 336 [Abstract]

12:10: [CompositeMonAM03]
Batteries: Trends in the Market and Research
Marcos De Campos1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 337 [Abstract]

12:35: [CompositeMonAM04]
Optimized Materials for Wind Turbines and Electric Motors
Marcos De Campos1 ; 1UFF - Federal Fluminense University, Volta Redonda, Brazil;
Paper Id: 338 [Abstract]

13:00 LUNCH

SESSION: CompositeMonPM1-R8
6th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications
Mon Nov, 5 2018 / Room: Grego (50/3rd)
Session Chairs: Raman Singh; Gabor Patonay; Session Monitor: TBA

14:00: [CompositeMonPM105] Plenary
Ultra-thin Graphene Coating on Metals for Corrosion Resistance: Opportunities and Challenges
Raman Singh1 ; 1Monash University, Monash University, Australia;
Paper Id: 168 [Abstract]

14:25: [CompositeMonPM106]
Effects of Various Additives and Sintering Temperature on Phase Evolution and Properties of Carbon-Clay Ceramic Composites
Fatai Olufemi Aramide1 ; Olusola Dayo Adepoju2 ; Patricia Abimbola Popoola3 ; 1Department of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria; 2Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria; 3Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Pretoria, South Africa;
Paper Id: 89 [Abstract]

14:50: [CompositeMonPM107]
How to Generate More Fluorescence with Less: Silica Nanoparticle Encapsulated Dyes
Gabor Patonay1 ; Eman Alsolmy1 ; Maged Henary1 ; 1Georgia State University, Atlanta, United States;
Paper Id: 227 [Abstract]

15:15: [CompositeMonPM108]
Thermoelectric Properties of the Layered Rhodates K&lt;sub&gt;x&lt;/sub&gt;RhO&lt;sub&gt;2&lt;/sub&gt; and Na&lt;sub&gt;x&lt;/sub&gt;CoO&lt;sub&gt;2&lt;/sub&gt;
Udo Schwingenschlogl1 ; Nirpendra Singh1 ; Yasir Saeed1 ; 1King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia;
Paper Id: 290 [Abstract]

15:40 Break

SESSION: CompositeMonPM2-R8
6th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications
Mon Nov, 5 2018 / Room: Grego (50/3rd)
Session Chairs: Chia-Hua Chan; Giovanni Perillo; Session Monitor: TBA

15:55: [CompositeMonPM209]
Comparative Analysis on Monolithic DeNOx Catalysts
Giovanni Perillo1 ; 1Wessex Institute of Technology, Southampton, United Kingdom;
Paper Id: 292 [Abstract]

16:20: [CompositeMonPM210]
Rice Husks Fibre Reinforced Polypropylene Composites for Structural Reuse - A Technological Solution to an Environmental Challenge in Sub-Saharan Africa
Edward Odhong1 ; Alex Munyasya Muumbo2 ; Abel N. Mayaka3 ; 1Multimedia University of Kenya, NAIROBI, Kenya; 2The Technical University of Kenya, Nairobi, Kenya; 3Multimedia University of Kenya, Nairobi, Kenya;
Paper Id: 26 [Abstract]

16:45: [CompositeMonPM211]
Applications of Microsphere Monolayers on Solar Cells and LEDs
Chia-hua Chan1 ; Chii-chang Chen1 ; 1National Central University, Taoyuan, Taiwan;
Paper Id: 278 [Abstract]

17:10: [CompositeMonPM212]
Influence of the Structural Parameters on the Optical Properties of Nano-dispersive Nickel
Lali Kalandadze1 ; Omar Nakashidze2 ; Nugzar Gomidze2 ; Izolda Jabnidze2 ; 1Batumi Shota Rustaveli State University, Batumi, Georgia; 2Batumi Shota Rustaveli State University, Batumi, Georgia;
Paper Id: 276 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: CompositeTueAM-R8
6th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications
Tue Nov, 6 2018 / Room: Grego (50/3rd)
Session Chairs: Fakhra Aziz; Jean-Charles Dupin; Session Monitor: TBA

11:20: [CompositeTueAM01]
The Spectroscopies of Electrons for the Control and the Development of Surface Technologies in the Transport Industry
Jean-charles Dupin1 ; 1IPREM UMR5254 CNRS - University of PAU, PAU, France;
Paper Id: 284 [Abstract]

11:45: [CompositeTueAM02]
Capacitive Humidity Sensor Based on Polymer Composite Thin Film
Fakhra Aziz1 ; Nosheen Fatima2 ; Lih W. Lim3 ; Khaulah Sulaiman3 ; 1University of Peshawar, Peshawar, Pakistan; 2Capital University of Science and Technology (CUST), Islamabad, Pakistan; 3University of Malaya, Kuala Lumpur, Malaysia;
Paper Id: 17 [Abstract]

12:10: [CompositeTueAM03]
Experimental Investigation of Drilling Carbon Fiber Reinforced Plastic Composite Materials
Kamlesh Phapale1 ; 1Bharat Forge Ltd., Pune, India;
Paper Id: 91 [Abstract]

12:35: [CompositeTueAM04]
Electron Beam Surface Hardening of AISI H13 Tool Steel
Sandeep Thakare1 ; 1Bharat forge limited, pune, India;
Paper Id: 147 [Abstract]

13:00 LUNCH

SESSION: CompositeTuePM1-R8
6th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications
Tue Nov, 6 2018 / Room: Grego (50/3rd)
Session Chairs: Emrah Ozensoy; Pragati Kumar; Session Monitor: TBA

14:00: [CompositeTuePM105]
Enhanced Precious Metal-free LaCo&lt;sub&gt;x&lt;/sub&gt;Mn&lt;sub&gt;1-x&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt; Hybrid Perovskite Catalysts with Fine-Tunable Redox Properties
Emrah Ozensoy1 ; 1Bilkent University, Ankara, Turkey;
Paper Id: 221 [Abstract]

14:25: [CompositeTuePM106]
Nanotwinning in Materials: A Worthy Defect for Superior Properties
Pragati Kumar1 ; Prateek Uttam1 ; Nupur Saxena1 ; 1Central University of Jammu, Jammu, jammu, India;
Paper Id: 242 [Abstract]

SESSION: MathematicsTuePM2-R8
3rd Intl. Symp. on Sustainable Mathematics Applications
Tue Nov, 6 2018 / Room: Grego (50/3rd)
Session Chairs: Peter Rowlands; Constantin Udriste; Session Monitor: TBA

15:55: [MathematicsTuePM209] Plenary
The &quot;Unreasonable&quot; Effectiveness of Mathematics in Physics
Peter Rowlands1 ; 1University of Liverpool, Liverpool, United Kingdom;
Paper Id: 217 [Abstract]

16:20: [MathematicsTuePM210] Invited
Multitime Optimal Control in Resource Economics
Constantin Udriste1 ; 1University Politehnica of Bucharest, Bucharest, Romania;
Paper Id: 191 [Abstract]

16:45: [MathematicsTuePM211]
Reconsideration of Continual and Statistical Mechanics Based on Scalar Representation of Deformation
Valeriy Ryabov1 ; 1Department of Nuclear Technology, National Research Centre, Obninsk, Russian Federation;
Paper Id: 175 [Abstract]

17:10: [MathematicsTuePM212]
Steady Biomagnetic Flow Along a Nonlinearly Stretching Surface with Magnetic Dipole
Ferdows Mohammad1 ; Maria Mahbub2 ; E.e. Tzirtzilakis3 ; 1, Dhaka, Bangladesh; 2M.SC stdent, dhaka, Bangladesh; 3Professor, Patras, Greece;
Paper Id: 354 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: AdvancedMaterialsWedAM-R8
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Grego (50/3rd)
Session Chairs: Michael Potesser; Ioan-Cezar Marcu; Session Monitor: TBA

11:20: [AdvancedMaterialsWedAM01] Invited
Layered Double Hydroxides-based Materials as Catalysts for Sustainable Chemical Processes
Ioan-cezar Marcu1 ; 1Laboratory of Chemical Technology & Catalysis, Faculty of Chemistry, University of Bucharest, Bucharest, Romania;
Paper Id: 169 [Abstract]

11:45: [AdvancedMaterialsWedAM02]
Advanced Experimental Design and Optimization Methods for New Building Materials Developed in Civil Engineering
Daniel Lepadatu1 ; Loredana Judele1 ; Ion Antonescu1 ; 1Technical University Gheorghe Asachi of Iasi, Faculty of Civil Engineering and Building Service, IASI, Romania;
Paper Id: 176 [Abstract]

12:10: [AdvancedMaterialsWedAM03]
Modern Methods of Determining Road Bitumen Adhesiveness to Natural Aggregates
Loredana Judele1 ; Daniel Lepadatu1 ; Iulian Cucos2 ; Mihaela Movila1 ; 1Technical University Gheorghe Asachi of Iasi, Faculty of Civil Engineering and Building Service, IASI, Romania; 2Technical University Gheorghe Asachi of Iasi, Faculty of Hydrotechnical Engineering, Geodesy and Environmental Engineering, IASI, Romania;
Paper Id: 186 [Abstract]

12:35: [AdvancedMaterialsWedAM04] Invited
Applications of Chalcogenides: S, Se, and Te
Gurinder Ahluwalia1 ; 1COLLEGE OF THE NORTH ATLANTIC, Labrador City, Canada;
Paper Id: 164 [Abstract]

13:00 LUNCH

SESSION: AdvancedMaterialsWedPM1-R8
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Grego (50/3rd)
Session Chairs: Yashika Gupta; Jarugu Narasimha Moorthy; Session Monitor: TBA

14:00: [AdvancedMaterialsWedPM105]
Investigating Reasons for Poor Performance of CdS/p-SnS Solar Cells
Yashika Gupta1 ; Arun Palakkandy2 ; 1University of Delhi, Delhi, India; 2S.G.T.B. Khalsa College, University of Delhi, Delhi, India;
Paper Id: 190 [Abstract]

14:25: [AdvancedMaterialsWedPM106]
Stimuli-Responsive Materials: Bottom-Up Control of Material Properties by De Novo Molecular Design
Jarugu Narasimha Moorthy1 ; 1Dept of Chemistry, IIT Kanpur, IIT Kanpur, India;
Paper Id: 192 [Abstract]

14:50: [AdvancedMaterialsWedPM107]
The Multi-layer Structures Based on TiO<sub>2</sub> for Multifunctional Glazing Surface
Luminita Andronic1 ; 1Transilvania University of Brasov, Brasov, Romania;
Paper Id: 215 [Abstract]

15:15: [AdvancedMaterialsWedPM108]
Heusler Alloy Thin Films Fabricated by DC Magnetron Co-sputtering
Jan Lancok1 ; Stanislav Cichon2 ; Katerina Horakova2 ; Vladimir Chab3 ; 1Institute of Physics ASCR, Prague 8, Czech Republic; 2Institute of Physics ASCR, Prague, Czech Republic; 3Institute of Physics CAS, Prague, Czech Republic;
Paper Id: 257 [Abstract]

15:40 Break

SESSION: AdvancedMaterialsWedPM2-R8
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Grego (50/3rd)
Session Chairs: Firoz Babu Kadumudi; Adedeji Badiru; Session Monitor: TBA

15:55: [AdvancedMaterialsWedPM209]
Laponite-reinforced Nanocellulose: A Wood-based Substrate for Recyclable and Foldable Electronics
Firoz Babu Kadumudi1 ; Mehdi Mehrali1 ; Alireza Dolatshahi Pirouz1 ; 1Technical University of Denmark, Kgs Lyngby, Denmark;
Paper Id: 258 [Abstract]

16:20: [AdvancedMaterialsWedPM210]
Achieving Sustainable Industrial Processing Through an Integrative Systems Engineering Framework
Adedeji Badiru1 ; 1Air Force Institute of Technology, Dayton, United States;
Paper Id: 301 [Abstract]

16:45: [AdvancedMaterialsWedPM211] Keynote
Engineering of Magnetic Softness and GMI Effect in Thin Magnetic Wires
Arcady Zhukov1 ; Paula Corte Leon2 ; Arcady Zhukov2 ; Juan Maria Blanco2 ; Valentina Zhukoa2 ; 1Dept. Phys. Mater., UPV/EHU, CIF:Q4818001B, San Sebastian, Spain; 2Dept. Phys. Mater., UPV/EHU, San Sebastian, Spain;
Paper Id: 328 [Abstract]

17:10: [AdvancedMaterialsWedPM212]
Microcrystalline Silicon Grown on Glass for Photo- and Thermophotovoltaic Applications
Karen Gambaryan1 ; 1Department of Physics of Semiconductors and Microelectronics, Yerevan State University, Yerevan, Armenia;
Paper Id: 411 [Abstract]

17:35 Break

SESSION: AdvancedMaterialsWedPM3-R8
4th Intl. Symp. on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
Wed Nov, 7 2018 / Room: Grego (50/3rd)
Session Chairs: Mayya Kulikova; Sholpan Itkulova; Session Monitor: TBA

17:40: [AdvancedMaterialsWedPM313]
Synthesis Gas Processing Over Ultrafine Catalysts Based on Composite Material
Mayya Kulikova1 ; 1Kulikov2007, Moscow, Russian Federation;
Paper Id: 87 [Abstract]

18:05: [AdvancedMaterialsWedPM314]
Hydrogen Production by Biogas Reforming Over Sol-gel Made Nanocatalysts
Sholpan Itkulova1 ; Sholpan Kussanova1 ; Kirill Valishevskiy1 ; Yerzhan Boleubayev1 ; 1D.V. Sokolsky Institute of Fuel, Catalysis and Electrochemistry, Almaty, Kazakhstan;
Paper Id: 99 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: BatteryMonAM-R9
5th Intl. Symp. on Sustainable Secondary Battery Manufacturing and Recycling
Mon Nov, 5 2018 / Room: Asian (60/3rd)
Session Chairs: Vasant Kumar; Miles Freeman; Session Monitor: TBA

11:20: [BatteryMonAM01] Keynote
Lead-acid Battery Recycling - A Different Way
Miles Freeman1 ; Athan Fox1 ; Robert Liu1 ; Johdie Harris1 ; Vasant Kumar2 ; 1Aurelius Environmental, Dudley, United Kingdom; 2University of Cambridge, Cambridge, United Kingdom ;
Paper Id: 426 [Abstract]

11:45: [BatteryMonAM02] Keynote
Preparation of High-Performance Cathode and Anode Materials for Sodium-Ion Batteries and Investigating the Reaction Mechanism
Ghulam Ali1 ; Ji Young Kim2 ; Hee-dae Lim3 ; Kyung Yoon Chung4 ; 1Korea Institute of Science and Technology (KIST), SEONGBUK-GU, South Korea; 2Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, South Korea; 3Korea Institute of Science and Technology (KIST), Seoul, South Korea; 4Korea Institute of Science and Technology, Seoul, South Korea;
Paper Id: 389 [Abstract]

12:10: [BatteryMonAM03]
Enabling Cost Effective Implementation of Next Generation Active Materials for Post Lithium Ion Batteries with Nitrogen-doped Single-walled Carbon Nanohorns
Claudio Capiglia1 ; 1Recruit R&D, Tokyo, Japan;
Paper Id: 97 [Abstract]

12:35: [BatteryMonAM04] Invited
Development of Nanostructured Electrode Materials for High Performance Secondary Batteries Using Ammonium Fluoride
Jinyoung Chun1 ; 1Korea Institute of Ceramic Engineering & Technology (KICET), Jinju, Republic of South Korea;
Paper Id: 371 [Abstract]

13:00 LUNCH

SESSION: BatteryMonPM1-R9
5th Intl. Symp. on Sustainable Secondary Battery Manufacturing and Recycling
Mon Nov, 5 2018 / Room: Asian (60/3rd)
Session Chairs: Claudio Capiglia; Jim Zheng; Session Monitor: TBA

14:00: [BatteryMonPM105]
NOVOpb - A Complete Lead Recycling System to Enhance Brazilian Sustainability
Deise Menezes Santos1 ; Yandiara Larissa Barros2 ; Marcos Benedito Jose Geraldo De Freitas3 ; André Gustavo De Sousa Galdino4 ; Matheus Carvalho5 ; Francklin Jonas De Paula6 ; Vasant Kumar7 ; 1, Vitoria, Brazil; 2Instituto Federal do Espirito Santo, Vitoria, Brazil; 3Universidade Federal do Espirito Santo, Vitoria, Brazil; 4Instituto Federal do Espírito Santo, Vitória, Brazil; 5Instituto Federal de Minas Gerais, Governador Valadares, Brazil; 6Faculdade Pitagoras, Governador Valadares, Brazil; 7University of Cambridge, Cambridge, United Kingdom ;
Paper Id: 385 [Abstract]

14:25: [BatteryMonPM106]
Solution-based Synthesis of Li3PS4 Solid Electrolytes
Hee-dae Lim1 ; Xing Xing2 ; Ping Liu2 ; 1Korea Institute of Science and Technology (KIST), Seoul, South Korea; 2University of California, San Diego (UCSD), San Diego, United States;
Paper Id: 384 [Abstract]

14:50: [BatteryMonPM107] Keynote
Internal Hybrid Li-ion Battery-Capacitor Energy Storage Cells
Annadanesh Shellikeri1 ; Mark Andrew Hagen1 ; Jin Yan2 ; W.j. Cao2 ; Richard Jow3 ; Jeffrey A. Read3 ; Jim Zheng1 ; 1Florida A&M University and Florida State University, Tallahassee, United States; 2General Capacitor LLC, Tallahassee, United States; 3U.S. Army Research Laboratory, Adelphi, United States;
Paper Id: 283 [Abstract]

15:15: [BatteryMonPM108]
New Possibilities in the Next Generation of Lead-Acid Batteries
Vasant Kumar1 ; 1University of Cambridge, Cambridge, United Kingdom ;
Paper Id: 382 [Abstract]

15:40 Break

SESSION: BatteryMonPM2-R9
5th Intl. Symp. on Sustainable Secondary Battery Manufacturing and Recycling
Mon Nov, 5 2018 / Room: Asian (60/3rd)
Session Chairs: Thierry Djenizian; Vimalnath Selvaraj; Session Monitor: TBA

15:55: [BatteryMonPM209] Invited
Crystal Growth of High-quality Lithium Metal Phosphates and Its Derivative by Using Flux Method
Tetsuya Yamada1 ; Katsuya Teshima2 ; 1Center for Energy & Environmental Science, Shinshu University, Nagano, Japan; 2Center for Energy & Environmental Science, Department of Materials Chemistry, Shinshu University, Nagano, Japan;
Paper Id: 323 [Abstract]

16:20: [BatteryMonPM210]
Dissolution of Spent Lead Acid Battery Paste for Lead Recovery, Bio-sensing and Bio-removal of Residual Pb Ions
Vimalnath Selvaraj1 ; Vasant Kumar2 ; Carsten Schwandt3 ; Subramanian Sankaran4 ; 1University of Cambridge, Cambridge, United Kingdom; 2University of Cambridge, Cambridge, United Kingdom ; 3University of Nizwa, Nizwa, Oman; 4Indian Institute of Science, Bengaluru, India;
Paper Id: 392 [Abstract]

16:45: [BatteryMonPM211]
High Performance of Chemically Modified TiO<sub>2</sub> Nanotubes for Lithium-ion Microbatteries
Thierry Djenizian1 ; 1Ecole des Mines Saint-Etienne, Gardanne, France;
Paper Id: 203 [Abstract]

17:10: [BatteryMonPM212] Keynote
Flux-Crystal Growth Engineering Toward Next-generation Batteries: Electrode Material and Interfacial Designs
Katsuya Teshima1 ; Tetsuya Yamada2 ; Shuji Oishi3 ; Nobuyuki Zettsu4 ; 1Center for Energy & Environmental Science, Department of Materials Chemistry, Shinshu University, Nagano, Japan; 2Center for Energy & Environmental Science, Shinshu University, Nagano, Japan; 3Center for Energy & Environmental Science, Shinshu University, Nagano, Japan; 4Shinshu University, Nagano, Japan;
Paper Id: 322 [Abstract]

17:35 Break

SESSION: BatteryMonPM3-R9
5th Intl. Symp. on Sustainable Secondary Battery Manufacturing and Recycling
Mon Nov, 5 2018 / Room: Asian (60/3rd)
Session Chairs: Hee-Dae Lim; Session Monitor: TBA

17:40: [BatteryMonPM313] Keynote
Fracture in anodes for Li-ion and Na-ion batteries
Katerina Aifantis1 ; 1University of Florida, Gainesville, United States;
Paper Id: 425 [Abstract]

18:05: [BatteryMonPM314]
New Approaches in the Development of Advanced Lithium-sulfur Batteries
Jiazhao Wang1 ; Xin Liang2 ; Mohammed Rejaul Kaiser2 ; Fang Li2 ; Huakun Liu2 ; 1Haoyun66, Wollongong, Australia; 2Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong, Australia;
Paper Id: 82 [Abstract]

19:30 PM Dinner


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: BatteryTueAM-R9
5th Intl. Symp. on Sustainable Secondary Battery Manufacturing and Recycling
Tue Nov, 6 2018 / Room: Asian (60/3rd)
Session Chairs: TBA Session Monitor: TBA

11:20: [BatteryTueAM01] Invited
Novel Electrode Materials as Anodes for High-Performance Na-ion Batteries
Ghulam Ali1 ; 1Korea Institute of Science and Technology (KIST), SEONGBUK-GU, South Korea;
Paper Id: 157 [Abstract]

11:45: [BatteryTueAM02]
Hydrometallurgically Generated Nanostructured Lead(II) Oxide from discarded Lead-Acid Batteries: From Laboratory to Pre-Pilot Scale-up
Robert Liu1 ; Miles Freeman1 ; Johdie Harris1 ; Steve Andrew1 ; Spencer Lowe1 ; Athan Fox1 ; Vasant Kumar2 ; Vimalnath Selvaraj3 ; Marcel Yiao3 ; 1Aurelius Environmental, Dudley, United Kingdom; 2University of Cambridge, Cambridge, United Kingdom ; 3University of Cambridge, Cambridge, United Kingdom;
Paper Id: 429 [Abstract]

SESSION: EnergyTuePM1-R9
5th Intl. Symp. on Sustainable Energy Production: Fossil; Renewables; Nuclear; Waste handling , processing, and storage for all energy production technologies; Energy conservation
Tue Nov, 6 2018 / Room: Asian (60/3rd)
Session Chairs: Manfred Mauntz; Harold Dodds; Session Monitor: TBA

14:00: [EnergyTuePM105] Plenary
Electricity Production Choices and Consequences - 2018 Update
Harold Dodds1 ; 1University of Tennessee, Knoxville, United States;
Paper Id: 163 [Abstract]

14:25: [EnergyTuePM106] Keynote
Deep Online Analysis of Dielectric Parameters for Lubricants and Insulation Oils: Identification of Critical Operation Conditions of Gearboxes and HV Transformers for Live Time Enhancement
Manfred Mauntz1 ; Jorn Peuser1 ; 1cmc Instruments GmbH, Eschborn, Germany;
Paper Id: 112 [Abstract]

14:50: [EnergyTuePM107] Invited
Microstructural Design in Hydrogen Fuel Storage
Jerzy Szpunar1 ; 1University of Saskatchewan, Saskatoon, Canada;
Paper Id: 366 [Abstract]

15:15: [EnergyTuePM108] Invited
Some of the Physical Contents of Thermodynamic Inequalities Leading to Nonequilibrium Thermodynamics and the Fifth Law of Thermodynamics
Anil A. Bhalekar1 ; 1R. T. M. Nagpur University,, NAGPUR, India;
Paper Id: 78 [Abstract]

15:40 Break

SESSION: EnergyTuePM2-R9
5th Intl. Symp. on Sustainable Energy Production: Fossil; Renewables; Nuclear; Waste handling , processing, and storage for all energy production technologies; Energy conservation
Tue Nov, 6 2018 / Room: Asian (60/3rd)
Session Chairs: Peter Wasserscheid; Meng Tao; Session Monitor: TBA

15:55: [EnergyTuePM209] Keynote
Process Intensification in Biorefineries – the Way to High Added Value Products
Ludo Diels1 ; 1VITO/UA, Mol, Belgium;
Paper Id: 314 [Abstract]

16:20: [EnergyTuePM210] Invited
Terawatt Solar Photovoltaics: Roadblocks and Opportunities
Meng Tao1 ; 1Arizona State University, Tempe, United States;
Paper Id: 146 [Abstract]

16:45: [EnergyTuePM211]
Recyclability of Heterogeneous Palladium Catalysts for the Dehydrogenation of Aqueous Formic Acid
Axel Kosider1 ; Patrick Preuster2 ; Andreas Boesmann3 ; Peter Wasserscheid4 ; 1, Erlangen, Germany; 2Forschungszentrum Jülich GmbH Helmholtz Institute Erlangen-Nürnberg for Renewable Energy, Erlangen, Germany; 3Friedrich-Alexander-University Erlangen-Nurnberg Lehrstuhl fur Chemische Reaktionstechnik, Erlangen, Germany; 4Friedrich-Alexander-Universitat, Erlangen, Germany;
Paper Id: 237 [Abstract]

17:10: [EnergyTuePM212]
Utilization of Green Cement (CSA) with CFBC Coal Power Plant Byproducts for 3D Printing Construction Materials for Sustainable Society
Jiwhan Ahn1 ; Thriveni Thenepalli2 ; Ramakrishna Chilakala3 ; 1KIGAM (Korea Institute of Geoscience and Mineral Resources), Daejeon, Republic of South Korea; 2hanil Cement Co Ltd, Daejeon, South Korea; 3Hanil Cement Co Ltd.,, Daejeon, South Korea;
Paper Id: 367 [Abstract]

17:35 Break


8:15 AM SUMMIT PLENARY
10:30 AM Break

SESSION: EnergyWedAM-R9
5th Intl. Symp. on Sustainable Energy Production: Fossil; Renewables; Nuclear; Waste handling , processing, and storage for all energy production technologies; Energy conservation
Wed Nov, 7 2018 / Room: Asian (60/3rd)
Session Chairs: Puzhen Gao; Tshimangadzo Saddam Munonde; Session Monitor: TBA

11:20: [EnergyWedAM01]
Nanostructured NiFe<sub>2</sub>O<sub>4</sub> Composites as Electrocatalysts for Hydrogen Evolution Reaction (HER) in Acidic Solutions
Tshimangadzo Saddam Munonde1 ; Philiswa Nomngongo2 ; Haitao Zheng1 ; Mphoma Matseke1 ; 1The Council for Scientific and Industrial Research (CSIR), Pretoria, South Africa; 2University of Johannesburg, Johannesburg, South Africa;
Paper Id: 210 [Abstract]

11:45: [EnergyWedAM02]
Nuclear Education and Training at Harbin Engineering University, China
Puzhen Gao1 ; 1Harbin Engineering University, Harbin, China;
Paper Id: 148 [Abstract]

12:10: [EnergyWedAM03]
Technological Treatment of Hazardous Chemical Waste
Sonja Stefanov1 ; Rade Biocanin2 ; Mitar Lutovac3 ; Kristina Radoman4 ; 1, Novi Sad, Serbia and Montenegro (formerly Yugoslavia); 2State University of Novi Pazar, Novi Pazar, Serbia and Montenegro (formerly Yugoslavia); 3University UNION Belgrade, Belgrade, Belgarde, Serbia and Montenegro; 4Pedagogical Club Tivat, Tivat, Tivat, Serbia and Montenegro;
Paper Id: 21 [Abstract]

12:35: [EnergyWedAM04]
Management of Sand Production in Oil and Gas Reservoirs
Abdollah Esmaeili1 ; 1Cyprus International University (CIU), Nicosia, Cyprus;
Paper Id: 36 [Abstract]

13:00 LUNCH

SESSION: EnergyWedPM1-R9
5th Intl. Symp. on Sustainable Energy Production: Fossil; Renewables; Nuclear; Waste handling , processing, and storage for all energy production technologies; Energy conservation
Wed Nov, 7 2018 / Room: Asian (60/3rd)
Session Chairs: Abdollah Esmaeili; Session Monitor: TBA

14:00: [EnergyWedPM105]
Sand Production in an Oil Well and Its Prediction Methods
Abdollah Esmaeili1 ; 1Cyprus International University (CIU), Nicosia, Cyprus;
Paper Id: 35 [Abstract]